Pligun Fast Track 50
Product: Pligun Fast Track 50
Product #: 3259
Service Temperature Limit: 3000°F
Installation Method: Gunning
Shelf Life: 9 months
Industries: Mineral Processing, Power Generation, Boilers, Incineration, Steel
Best Applications: Engineered for general purpose and repair applications in industrial thermal processing industries, these include:
- Reheat, forging, and heat treat furnaces
- Incinerators and thermal oxidizers
- Fluidized bed combustors/boilers
- Utility boilers
- Dryers and calciners
- Stacks and ducts
- Gypsum kettles
- Crematories
Plibrico TDS Link – http://plibri.co/pligun-ft50
Product Information: Pligun® Fast Track 50 is a flint based super duty, high purity cement gun mix. This low cement material may be dried out / heated on an accelerated schedule and minimum cure time. Cure times can be reduced to 4 hours! However, for ideal physical characteristics a longer cure time is recommended. After curing, heat can be as fast as 100°F/hr with no temperature hold – refer to Plibrico Bake Out Schedule FT for specifics. Product advantages include:
- Economical, general purpose repair material
- Very good density
- Good for hot gunning
- Good adherence to worn refractory
- Good strength and volume stability
- Better properties than a typical high cement gun mix
- Very good gunability and low rebound
- Capable of rapid start-up using accelerated dry-outs
Available Internationally As: Plico® Gun Mix Fast Track 50
Plibrico SDS Link – https://plibri.co/33uzbfs