Pligun 90

Product: Pligun 90

Product #: 3334

Service Temperature Limit: 3300°F

Installation Method:  Gunning

Shelf Life:  9 months

Industries:  Oil/Gas, Off-Gas, Chemical-Ammonia, Steel, Ferrous, Refining, Pulp & Paper, Thermal Oxidizers

Best Applications:  Designed for very high temperature and/or reducing atmosphere applications in industrial processes, including:

  1. Thermal Oxidizer burner and reducing zones
  2. Ammonia Reformers
  3. Oil fired and waste heat boilers
  4. Carbon Black Reactors
  5. Sulfur recovery units

Plibrico TDS Link – https://plibri.co/3WCE9B7

Product Information: Pligun® 90 is a high alumina, high strength, conventional gun mix for service at elevated temperatures and demanding conditions.   It provides excellent chemical resistance as well as good abrasion resistance.   Pligun 90 has a low silica content making it suitable for high-temperature hydrogen atmospheres.   This gun mix utilizes a high purity corundum aggregate and matrix, bonded by high purity calcium aluminate cement.   It can be used in a variety of applications where a high purity refractory is required.   Further product advantages for Pligun 90 include:

  • Good physical properties for a conventional gun mix at elevated temperatures above 2000°F
  • Excellent resistance to reducing and hydrogen atmospheres
  • High Refractoriness
  • Good high temperature creep resistance
  • High thermal expansion coefficient
  • High thermal conductivity
  • Good gunability

Available Internationally As:  Plico® Gun Mix 90

Plibrico SDS Link – https://plibri.co/3SHVlE6

/by

Redline Red Hot G 45

Product: Redline Red Hot G 45

Product #: 52408

 

Service Temperature Limit:   2700oF

Installation Method:  Gunning

Shelf Life: 9 months

 

Industries: Power Generation, Off-Gas, Heat Treat, Foundry, Incineration, Boilers

Best Applications: This material is engineered for resurfacing existing refractory surfaces while still in a “hot” condition, these include:

  1. Soaking Pits
  2. Common Tunnels
  3. Dryers and calciners
  4. Heat Treat Furnaces
  5. Incinerators / Thermal Oxidizers

Plibrico TDS Link – https://plibri.co/4c5kOyV

Product Information:  Redline™ Red Hot G 45 is a 45% alumina, flint based low cement gun mix designed for resurfacing existing refractory surfaces.   It is generally applied in hot conditions, but can also be used cold.  Red Hot G 45 is typically used as a hot or cold service/repair material but can be used as a primary lining.  Product advantages include:

  • Excellent for hot gunning installations
  • Low rebound
  • Good adherence to old refractory
  • No special gunning installation requirements
  • Economical

 

Available Internationally As: Redline Red Hot G 45

Plibrico SDS Link – https://plibri.co/4b5NWVE

 

/by

Redline Redgun 45ES

Product: Redline Redgun 45ES

Product #: 52302

Service Temperature Limit:  2500°F

Shelf Life: 12 months

Product Information: Redline Redgun 45ES is a first quality gunning mix that exhibits excellent strengths combined with good resistance to abrasion and mechanical abuse.   It is a general purpose mix that has many applications.   Common applications include marine and stationary boilers, ashpits, and cement clinker coolers.

/by

Redline Red Hot G 60A

Product: Redline Red Hot G 60A

Product #: 52403

Service Temperature Limit:

Aluminum Contact – 1700°F

Non-Contact – 3100°F

Shelf Life:  9 months

Product Information: Redline Red Hot G 60A is a mullite based gun mix designed for resurfacing existing refractory surfaces.   It is generally applied in hot conditions, but can also be used cold.   This material contains a non-wetting system and can be used above and below metal line in aluminum processing furnaces.

/by

Redline Red Hot G 70A

Product: Redline Red Hot G 70A

Product #: 52404

Service Temperature Limit:

Aluminum Contact – 1700°F

Non-Contact – 3100°F

Shelf Life:  9 months

Product Information: Redline Red Hot G 70A is a mullite based gunning mix which can be applied either hot or cold.   It develops an excellent bond with existing refractory surfaces and was designed to be applied over worn linings in aluminum processing furnaces.   It contains a non-wetting system and can be applied both above and below metal line.

/by

Redline Red Hot G 60/5

Product: Redline Red Hot G 60/5

Product #: 52304

Service Temperature Limit:

Aluminum Contact –  1700°F

Non-Contact – 3100°F

Shelf Life: 9 months

Product Information: Redline™ Red Hot G 60/5 is a mullite based gun designed for resurfacing existing refractory surfaces.   It contains a silicon carbide addition to help resist corundum build up.   It is generally applied in hot conditions, but can also be used cold.   This material contains a non-wetting system and can be used above and below metal line in aluminum processing furnaces.

/by

Redline Redgun 60A

Product: Redline Redgun 60A

Product #: 52401

Service Temperature Limit:

Aluminum Contact – 1700°F

Non-Contact – 3100°F

Shelf Life:  9 months

Product Information: Redline Redgun 60A is a mullite based gun material which exhibits good thermal shock resistance and volume stability.   It contains a non-wetting additive system which makes it resistant to molten aluminum.   Applications include: resurfacing aluminum furnace walls (upper and lower), and in some cases, complete wall thicknesses.

/by

Redline Redgun 70A

Product: Redline Redgun 70A

Product #: 52402

Service Temperature Limit:

Aluminum Contact – 1700°F

Non-Contact – 3100°F

Shelf Life:  9 months

Product Information: Redline Redgun 70A is a high purity mullite based gun material that exhibits good thermal shock resistance and volume stability.   It contains a non-wetting additive system that makes it resistant to molten aluminum.   Applications include: resurfacing aluminum furnace walls (upper and lower), and in some cases, complete wall thicknesses.

/by

Redline Redgun 50A

Product: Redline Redgun 50A

Product #: 52405

Service Temperature Limit:

Aluminum Contact –  1700°F

Non-Contact – 3000°F

Shelf Life: 9 months

Product Information: Redline™ Redgun 50A is a super duty gun mix that exhibits excellent hot strength combined with good resistance to abrasion and mechanical abuse.   It can be used in non-metal contact areas of aluminum melting and holding equipment, high temperature stack linings, cement kiln linings, firing hoods, and reheat furnaces.

/by

Redline Red Hot G 70/5

Product: Redline Red Hot G 70/5

Product #: 52305

Service Temperature Limit:

Aluminum Contact –  1700°F

Non-Contact – 3100°F

Shelf Life: 9 months

Product Information: Redline™ Red Hot G 70/5 is a mullite based gunning mix which can be applied either hot or cold.   It contains a silicon carbide addition to help resist corundum buildup.   This material develops an excellent bond with existing refractory surfaces and was designed to be applied over worn linings in aluminum processing furnaces.   It contains a non-wetting system and be applied both above and below the metal line.

/by

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®Super F AB58%2900F / 1590CSDS
    Plibrico®60 AB58%3100F / 1705CSDS
    Plibrico®80 AB78%3200F / 1760CSDS
    Plibrico®90 AB90%3400F / 1871CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®55 S54%3000F / 1648CSDS
    Plibrico®68 S68%3100F / 1705CSDS
    Plibrico®68 SA68%3100F / 1705CSDS
    Plibrico®85 S Special83%3300F / 1815CSDS
    Plibrico®90 S90%3400F / 1870CSDS
    Plibrico®SiC 80(80% SiC)2700F / 1480CSDS

    (fine grain – soft)

    Product Name%Al2O3Service LimitSDS
    Plibrico®SR 6868%3100F / 1705CSDS
    Plibrico®SR 8583%3300F / 1815CSDS
    Plibrico®SR 9088%3400F / 1870CSDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®Super F AB43%2900F / 1595CSDS
    Plibrico HyRATE®60 AB60%3100F / 1705CSDS
    Plibrico HyRATE®80 AB78%3200F / 1760CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®68 S68%3100F / 1705CSDS
    Plibrico HyRATE®85 S Special84%3300F / 1815CSDS