Plibrico 80 AB

Product: Plibrico 80 AB
Product #: 10016

Service Temperature Limit: 3200°F

Installation Method: Ramming
Shelf Life: 12 months

Industries: Aluminum, Steel, Foundry, Mineral Processing, Power Generation, Pulp & Paper, Refining

Best Applications: Applications in industrial processes which require a super duty plastic including:

  1. Burner cones
  2. Steel and foundry – reheat furnaces, soaking pits, and forge furnaces
  3. Boilers
  4. Incinerators
  5. Aluminum – furnace upper walls and roofs

Plibrico TDS Link – http://bit.ly/2XOj0Ud

Product Information: Plibrico 80 AB is Plibrico’s highest temperature standard air bond plastic refractory. This tried-and-true plastic utilizes a bauxite aggregate in an alumina fortified air bonding matrix. The result is a reliable and consistent plastic refractory with high refractoriness and volume stability. Product attributes include:

  • Contains an air bonding agent for better low temperature strength and shrinkage control
  • Good volume stability at high temperatures
  • Good thermal shock and crack resistance
  • Moderate slag resistance
  • Meets ASTM classification C673 80% Alumina

Material ordered in either Stiff (SF), Standard (SD), or Export (EX) workability.

Available Internationally As: Plico®️ 80 AB

Plibrico SDS Link – http://bit.ly/2Y3JDsm

/by

Plibrico 68-SA

Product: Plibrico 68 SA
Product #: 10073

Service Temperature Limit: 3100°F

Installation Method: Ramming
Shelf Life: 4 months

Industries: Aluminum/Non-Ferrous, Steel, Foundry, Power Generation, Incineration, Boilers, Pulp & Paper

Best Applications: Industrial processes which require a high strength phosphate bonded plastic. Typical applications include:

  1. Burner cones
  2. Steel and Foundry – reheat furnaces, soaking pits, and forge furnaces
  3. Boilers
  4. Incinerators – slagging areas
  5. Aluminum – furnace lower sidewalls, hearths, upper walls and roofs; troughs and launders

Plibrico TDS Link – http://bit.ly/2Iu56By

Product Information: Plibrico®️ 68 SA is a mullite-based phosphate-bonded plastic refractory. It is similar in chemistry and minerology to Plibrico 68 S but contains an important enhancement. This refractory incorporates a high mullite-content aggregate in an alumina-fortified phosphate bonding matrix that utilizes the Plibrico Company’s proprietary monoaluminium phosphate. Plibrico 68 SA also features an improved aggregate sizing distribution. The improved sizing distribution gives the plastic a smoother texture which can result in improved ramming characteristics with reduced slumping. Other product attributes include:

  • High hot strength
  • Good refractoriness under load (RUL)
  • Good volume stability through its service temperature range
  • Excellent abrasion resistance
  • Good slag resistance
  • Non-wetting to aluminum
  • Reduced slumping
  • Meets ASTM classification C673 70% Alumina

Plibrico 68 SA is ordered in either Stiff (SF), Standard (SD), or Export (EX) workability to conform to installation and storage requirements.

Available Internationally As: Plico®️ 68 SA

Plibrico SDS Link – http://bit.ly/2MkeHfA

/by

Plibrico 68-S

Product: Plibrico 68 S
Product #: 10037

Service Temperature Limit: 3100°F

Installation Method: Ramming
Shelf Life: 4 months

Industries: Aluminum, Steel, Foundry, Power Generation, Boilers, Incineration, Off-Gas, Sugar, Ethanol

Best Applications: Applications in industrial processes which require a high strength phosphate bonded plastic including:

  1. Burner cones
  2. Steel and foundry – reheat furnaces, soaking pits, and forge furnaces
  3. Boilers
  4. Incinerators – slagging areas
  5. Aluminum – furnace lower sidewalls, hearths, upper walls and roofs, troughs and launders

Plibrico TDS Link – http://bit.ly/2YgGjtT

Product Information: Plibrico 68 S is mullite based, phosphate bond, plastic refractory. This plastic utilizes a high mullite content aggregate in an alumina fortified phosphate bonding matrix that incorporates Plibrico Company’s proprietary monoaluminium phosphate. The result is a phosphate bonded plastic refractory with great workability and storage characteristics. Other product attributes include:

  • High hot strength
  • Good refractoriness under load (RUL)
  • Good volume stability through its service temperature range
  • Excellent abrasion resistance
  • Good slag resistance
  • Non-wetting to aluminum
  • Meets ASTM classification C673 70% Alumina
  • Plibrico 68 S is available in standard, stiff and soft consistencies to conform with installation and storage requirements.

Material ordered in either Stiff (SF), Standard (SD), or Export (EX) workability.

Available Internationally As: Plico®️ 68 S

Plibrico SDS Link – http://bit.ly/2Ylpm1E

/by

Plibrico 60 AB

Product: Plibrico 60 AB

Product #: 10023

Service Temperature Limit: 3100°F

Installation Method: Ramming
Shelf Life: 12 months

Industries: Aluminum/Non Ferrous, Steel, Power Generation, Mineral Processing, Refining, Off Gas

Best Applications: Created to support a variety of industrial processes, applications which require a spall resistant
high temperature plastic are some of this materials prime targets, this includes:

  1. Burner cones in various industries 4. Boilers
  2. Steel and foundry – reheat furnaces, soaking pits
  3. Incinerators and forge furnaces
  4. Aluminum – furnace upper walls and roofs
  5. Cement kiln firing hoods

Product Information: Plibrico®️ 60 AB is a versatile 60% alumina class air bond plastic refractory. This plastic
refractory material is used in a wide range of industrial applications and is one of Plibrico’s best-selling plastic
refractories. Based on a high mullite aggregate and enhanced matrix, Plibrico 60 AB has been field tested and is the
go-to-material when a high service limit, thermal spall resistant plastic is required. Product attributes include:

  • Better low temperature strength and shrinkage control due to its air bonding agent
  • Good volume stability through its temperature range
  • Relatively low thermal expansion
  • Good thermal shock and spall resistance
  • Good hot load resistance <7% at 2640°F
  • Meets ASTM classification C673 60% alumina

Material ordered in either Stiff (SF), Standard (SD), or Export (EX) workability.

Available Internationally As: Plico®️ 60 AB

 

/by

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®Super F AB58%2900F / 1590CSDS
    Plibrico®60 AB58%3100F / 1705CSDS
    Plibrico®80 AB78%3200F / 1760CSDS
    Plibrico®90 AB90%3400F / 1871CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®55 S54%3000F / 1648CSDS
    Plibrico®68 S68%3100F / 1705CSDS
    Plibrico®68 SA68%3100F / 1705CSDS
    Plibrico®85 S Special83%3300F / 1815CSDS
    Plibrico®90 S90%3400F / 1870CSDS
    Plibrico®SiC 80(80% SiC)2700F / 1480CSDS

    (fine grain – soft)

    Product Name%Al2O3Service LimitSDS
    Plibrico®SR 6868%3100F / 1705CSDS
    Plibrico®SR 8583%3300F / 1815CSDS
    Plibrico®SR 9088%3400F / 1870CSDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®Super F AB43%2900F / 1595CSDS
    Plibrico HyRATE®60 AB60%3100F / 1705CSDS
    Plibrico HyRATE®80 AB78%3200F / 1760CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®68 S68%3100F / 1705CSDS
    Plibrico HyRATE®85 S Special84%3300F / 1815CSDS