Product: Redline Redphos 68SA

Product #: 59101

Service Temperature Limit: 3100°F

Shelf Life: 4 months

Product Information: Redline Redphos 68SA is a mullite-based phosphate-bonded plastic refractory.   This refractory incorporates a high mullite-content aggregate in an alumina-fortified phosphate bonding matrix that utilizes a proprietary monoaluminium phosphate.   Redline Redphos 68SA offers a specific sizing distribution that gives the plastic a smoother texture which can result in improved ramming characteristics with reduced slumping.

Redline Redphos 68SA is ordered in either Stiff (SF), Standard (SD), or Export (EX) workability to conform to installation and storage requirements.

Product: Plibrico Super F AB
Product #: 10008

Service Temperature Limit: 2900°F

Installation Method: Ramming
Shelf Life: 12 months

Industries: Aluminum, Steel, Mineral Processing, Power Generation, Off-Gas, Pulp & Paper, Refining, Sugar, Ethanol

Best Applications: Applications in industrial processes which require a super duty plastic including:

  1. Steel and foundry – reheat furnaces, soaking pits, and forge furnaces
  2. Boilers
  3. Gypsum kettles
  4. Cement kiln firing hoods
  5. Incinerators
  6. Aluminum – furnace upper walls and roofs

Plibrico TDS Link – http://bit.ly/2CUWD8o

Product Information: Plibrico Super F AB is the company’s super duty class air bond plastic refractory. Evolving from the original plastic material that Plibrico pioneered in the early 20th century, this material is field tested and has withstood the test of time. Economical with great workability, this workhorse can be used for a wide variety of applications. Product attributes include:

  • Contains an air bonding agent for better low temperature strength and shrinkage control
  • Good volume stability through its temperature range
  • Good hot lad resistance – <6% at 2640°F
  • Meets ASTM classification C673 Super Duty

Material ordered in either Stiff (SF), Standard (SD), or Export (EX) workability.

Available Internationally As: Plico®️ Super F AB

Plibrico SDS Link – http://bit.ly/32fE3Cn

 

Product: Plibrico SR 90
Product #: 12011

Service Temperature Limit: 3400°F

Installation Method: Ramming
Shelf Life: 6 months

Industries: Steel, Foundry, Power Generation, Aluminum, Boilers, Incinerators, Burners

Best Applications: Due to its high workability and fine grain sizing, Plibrico SR 90 is ideal for patching and repairing worn refractory, thin lining applications and for use on studded tubes. Other applications include:

  1. Burner cones
  2. Steel and foundry:
  3. Water cooled pipe covering
  4. Ladle lips
  5. Runner linings
  6. Utility boilers – coal and oil fired:
  7. Burner throats
  8. Slag taps
  9. Cyclone burners
  10. Hazardous waste incinerators – slagging areas
  11. Aluminum furnace repairs

Plibrico TDS Linkhttp://bit.ly/2YwImYq

Product Information: Plibrico®️ SR 90 is a high alumina, phosphate bond plastic refractory. Manufactured with a fine grain sizing and a soft plastic consistency, this 3400°F service limit plastic utilizes a corundum and bauxite aggregates in an alumina fortified phosphate bonding matrix utilizing Plibrico’s proprietary monoaluminium phosphate. The result is a very workable phosphate bonded plastic refractory with low impurities, iron and alkalies, and stable storage characteristics. Other product attributes include:

  • Good hot strength
  • Excellent abrasion resistance – 5cc loss per ASTM C 704
  • Very good slag resistance
  • Non-wetting to aluminum
  • Meets ASTM classification C673 90% Alumina

Available Internationally As: Plico®️ SR 90

Plibrico SDS Linkhttp://bit.ly/2P37jHW

Product: Plibrico SR-85

Product #: 10085

Service Temperature Limit:  3300°F

Installation Method:  Ramming

Shelf Life: 6 months

Industries: Boilers, Power Generation, Incinerators, Aluminum

Best Applications: Engineered for industrial processes that require repair/service material for a more severe, higher temperature application.   Formulated with a phosphate bonded plastic, applications include:

  1. Municipal wastewater wall tubes to ram around studs
  2. Incinerators: slagging area repairs
  3. Cyclone burner repair
  4. Slag dam repair in utility boilers
  5. Aluminum: run-through troughs and launder repairs

Plibrico TDS Link – https://plibri.co/2XvJNKy

Product Information: Plibrico® SR-85 is an 80% alumina, bauxite based, soft, fine-grained phosphate bonded plastic.   Designed for thinner applications, it works great for patching and repairing existing linings that see more severe service conditions.   Plibrico SR-85 chemically bonds very well to existing refractory, making it an excellent material choice to combat corrosion to slags and molten aluminum penetration.   Product advantages include:

  • Soft putty-like consistency for ease of use
  • Chemically bonds to existing refractory for long repair life
  • Good alkali resistance
  • Non-wetting to aluminum

Available Internationally As: Plico® SR-85

Plibrico SDS Link – https://plibri.co/2XCh6f2

Product: Plibrico SR-68

Product #: 10068

Service Temperature Limit:  3100°F

Installation Method:  Ramming

Shelf Life: 6 months

Industries: Boilers, Power Generation, Incinerators, Aluminum

Best Applications: Engineered for applications in industrial processes which require repair/service material made from a phosphate bonded plastic, including:

  1. Boilers tube repair to ram around studs
  2. Incinerators: slagging area repairs
  3. Cyclone burner repair
  4. Slag dam repair in utility boilers
  5. Aluminum: run-through troughs and launder repairs

Plibrico TDS Link – https://plibri.co/3yfakZc

Product Information: Plibrico® SR-68 is a 70% alumina, mullite based, soft, fine-grained phosphate bonded plastic engineered for thin applications and patch/repair of existing linings.   This economical service material has an excellent chemical bond to existing refractory, as well as good corrosion resistance to slags and molten aluminum penetration.   Product advantages include:

  • Soft putty-like consistency for ease of use
  • Chemically bonds to existing refractory for long repair life
  • Good alkali resistance
  • Non-wetting to aluminum

Available Internationally As: Plico® SR-68

Plibrico SDS Link – https://plibri.co/2WluDHs

Product: Plibrico SiC 80
Product #: 10075

Service Temperature Limit: 2700°F

Installation Method: Ramming
Shelf Life: 6 months

Industries: Power Generation, Waste-To-Energy, Boilers, Burners

Best Applications: Plibrico SiC 80 is designed for applications where high thermal conductivity and/or slag resistance is required. For example, a thin wall covering on heat exchanger tubes in a slagging or corrosive environment. Other applications include:

  1. Burners
  2. Utility boilers – coal and oil fired
  3. Cyclone burners
  4. Circulating fluidized bed boilers
  5. Municipal waste co-gen incinerators

Plibrico TDS Linkhttp://bit.ly/2Lkooe8

Product Information: Plibrico®️ SiC 80 is a phosphate bond, silicon carbide plastic refractory. This product incorporates Plibrico’s proprietary monoaluminium phosphate, with a refractory grade silicon carbide in an alumina fortified phosphate bonding matrix. The result of this combination is a high silicon content phosphate bonded plastic refractory with low impurities – iron and alkalis. Plibrico SiC 80 also has good workability and stable storage characteristics. Other product attributes include:

  • High silicon carbide content – 80% SiC
  • Good hot strength
  • Low shrinkage
  • High thermal conductivity
  • Very good slag resistance
  • Good thermal shock resistance
  • Plibrico SiC 80 is available in standard, stiff and soft consistencies to conform to installation and storage requirements.

Material ordered in either Stiff (SF), Standard (SD), or Export (EX) workability.

Available Internationally As: Plico®️ SiC 80

Plibrico SDS Linkhttp://bit.ly/2YjbrGP

Product: Plibrico 90 S
Product #: 10033

Service Temperature Limit: 3400°F

Installation Method: Ramming
Shelf Life: 4 months

Industries: Steel, Power Generation, Boilers, Incineration, Aluminum/Non-Ferrous

Best Applications: This material is best used for applications in industrial processes which require a high temperature, high strength phosphate bonded plastic including:

  1. Burner cones
  2. Steel and foundry – reheat and forge furnaces hearths
  3. Utility boilers – coal and oil fired
  4. Burner throats
  5. Slag taps/floors
  6. Cyclone burners
  7. Hazardous waste incinerators – slagging areas
  8. Sulfur recovery units

Plibrico TDS Linkhttp://bit.ly/2OWBLT5

Product Information: Plibrico®️ 90 S is a very high alumina, phosphate bond plastic refractory. With a service limit of 3400°F, this plastic utilizes a corundum in an alumina fortified phosphate bonding matrix utilizing Plibrico’s proprietary monoaluminium phosphate. The result is a phosphate bonded plastic refractory with low impurities, iron and alkalies, good workability and stable storage characteristics. Other product attributes include:

  • High service limit – 3400°F
  • Good hot strength
  • Good volume stability through its service temperature range
  • Excellent abrasion resistance – 5cc loss per ASTM C 704
  • Very good slag resistance
  • Non-wetting to aluminum
  • Meets ASTM classification C673 90% Alumina
  • Plibrico 90 S is available in standard, stiff and soft consistencies to conform to installation and storage requirements.

Material ordered in either Stiff (SF), Standard (SD), or Export (EX) workability.

Available Internationally As: Plico®️ 90 S

Plibrico SDS Linkhttp://bit.ly/2XKelEp

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®Super F AB 58% 2900F / 1590C SDS
    Plibrico®60 AB 58% 3100F / 1705C SDS
    Plibrico®80 AB 78% 3200F / 1760C SDS
    Plibrico®90 AB 90% 3400F / 1871C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®55 S 54% 3000F / 1648C SDS
    Plibrico®68 S 68% 3100F / 1705C SDS
    Plibrico®68 SA 68% 3100F / 1705C SDS
    Plibrico®85 S Special 83% 3300F / 1815C SDS
    Plibrico®90 S 90% 3400F / 1870C SDS
    Plibrico®SiC 80 (80% SiC) 2700F / 1480C SDS

    (fine grain – soft)

    Product Name %Al2O3 Service Limit SDS
    Plibrico®SR 68 68% 3100F / 1705C SDS
    Plibrico®SR 85 83% 3300F / 1815C SDS
    Plibrico®SR 90 88% 3400F / 1870C SDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®Super F AB 43% 2900F / 1595C SDS
    Plibrico HyRATE®60 AB 60% 3100F / 1705C SDS
    Plibrico HyRATE®80 AB 78% 3200F / 1760C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®68 S 68% 3100F / 1705C SDS
    Plibrico HyRATE®85 S Special 84% 3300F / 1815C SDS