Plicast 40

Product: Plicast 40
Product #: 14010

Service Temperature Limit: 3400°F

Installation Method: Casting or Pumping
Shelf Life: 9 months

Industries: Oil/Gas, Off-Gas, Chemical-Ammonia, Steel, Aluminum, Refining, Ferrous, Pulp & Paper

Best Applications: Higher temperature and/or reducing atmosphere applications in industrial processes including:

  1. Precast Shapes – including burner cones and piers – various industries
  2. Ammonia reformers
  3. Oil fired and waste heat boiler choke rings
  4. Carbon black reactors
  5. Sulfur recovery units -burners and tube sheets

Plibrico TDS Link – http://bit.ly/39GCD7D

Product Information: Plicast®️ 40 is a high purity, very high temperature conventional castable. With a service limit of 3400°F, it utilizes a high purity corundum aggregate and matrix, bonded by high purity calcium aluminate cement. It possesses good strength and abrasion resistance, and can be used in a variety of applications where a high purity castable is required. Product properties for Plicast 40 include:

  • Great hot strength especially above 2500°F
  • Good resistance to reducing and high H2 atmospheres
  • Good abrasion resistance
  • High thermal conductivity
  • High thermal expansion coefficient
  • Neutral chemistry for corrosion resistance to moderately acid and basic slags
  • Good high temperature creep resistance
  • Plicast 40 has good flow and setting characteristics allowing it to be place by vibration, casting or pumping.

Available Internationally As: Plico®️ Castable 40

Plibrico SDS Link – http://bit.ly/2N4b4f0

/by

Plicast 36

Product: Plicast 36

Product #: 14008

Service Temperature Limit: 3100°F

Installation Method:  Casting

Shelf Life:  9 months

Industries:  Steel, Mineral Processing, Boilers

Best Applications:  Developed for high temperature applications and general refractory uses over a wide range of applications, including:

  1. Pre-cast burner throats
  2. Annealing & Homogenizing Furnace Base
  3. Gypsum Kettle Side Walls
  4. Water-tube Boiler Floors

Plibrico TDS Link – https://plibri.co/3ejWvSK

Product Information: Plicast® 36 is a work-horse conventional castable.   With a high temperature service limit, this mullite-based, high strength material offers very good volume stability.   It comes with an economical cost to meet a broad range of applications.   Product advantages include:

  • Low Iron Content
  • Very good volume stability
  • Good thermal conductivity for a mullite based product
  • Easy to install

Available Internationally As:  Plico® Castable 36

Plibrico SDS Link – https://plibri.co/2O6UrDc

/by

Plicast 31

Product: Plicast 31

Product #: 14006

Service Temperature Limit:  2800°F

Installation Method:  Casting

Shelf Life: 12 months

Industries: Steel, Mineral Processing, Refining, Boilers, Foundry, Pulp & Paper, Sugar, Power Generation, Incineration

Best Applications:  Engineered for higher temperature, intermediate duty, general refractory uses over a wide range of applications.   Typical applications include:

  1. Boiler baffles, floors, and cells
  2. Incinerators
  3. Dryers and Calciners
  4. Gypsum Kettles
  5. Homogenizing and annealing furnaces
  6. Flues
  7. Fluid bed combustors
  8. Cement clinker coolers

Plibrico TDS Link – https://plibri.co/3oNYOlL

Product Information: Plicast® 31 is a well-proven, refractory veteran that can be used in many different applications.   It is a first quality, high strength castable refractory.   Plicast 31 offers balanced properties at an economical cost to meet a broad range of service conditions at higher operating temperatures.   Product advantages include:

  • 2800°F service limit
  • Good strength to density ratio for economical use
  • Good volume stability
  • Moderate thermal expansion
  • Moderate thermal conductivity
  • Good water range for ease of installation

Available Internationally As: Plico Castable 31

Plibrico SDS Link – https://plibri.co/3GPJfjp

/by

Plicast 27 C

Product: Plicast 27 C

Product #: 14004

Service Temperature Limit:  2500°F

Installation Method:  Casting

Shelf Life: 12 months

Industries: Steel, Mineral Processing, Refining, Foundry, Pulp & Paper, Sugar, Incineration, Boilers

Best Applications: Engineered for intermediate duty, general refractory uses over a wide range of applications, including:

  • Boiler baffles, floors and cells
  • Incinerators
  • Dryers & Calciners
  • Gypsum Kettles
  • Homogenizing and annealing furnaces
  • Fireplaces
  • Flues
  • Fluid bed combustors
  • Cement clinker coolers
  • Car Bottoms

Plibrico TDS Link – https://plibri.co/2VX5HWD

Product Information: Plicast® 27C is a coarse-grained, intermediate duty, conventional castable that has been a trusted go-to castable for many refractory applications.   This material is a high quality, high strength, castable refractory with balanced properties, and an economical cost that meets and exceeds a broad range of service conditions at average operating temperatures.   Product advantages include:

  • Good Cold Crushing Strength
  • Good volume stability
  • Favorable abrasion resistance for a conventional castable due to coarse grain in the refractory matrix
  • Moderate thermal conductivity
  • Good water range for ease of installation

Available Internationally As: Plico® Castable 27 C

Plibrico SDS Link – https://plibri.co/2XANxuI

/by

Plicast 27 CP KK

Product: Plicast 27 CP KK

Product #: 14028

 Service Temperature Limit: 2500°F

 Installation Method:  Pumping

Shelf Life:  12 months

 Industries:  Mineral Processing, Aluminum, Steel, Foundry, Boiler

Best Applications:  Engineered for field applications and precast shapes requiring impact and load resistance, including:

  1. Heat treat, homogenizing, and annealing furnace bases and car tops
  2. Ash hopper linings
  3. Sub hearths in ferrous and aluminum furnaces
  4. Aggregate and clay calciner linings
  5. Piers

Plibrico TDS Link – https://plibri.co/3hVydhA

Product Information: Plicast® 27 CP KK is an intermediate duty, 2500°F service limit castable that contains a super coarse grain flint aggregate for improved impact and crack resistance.   Based on Plicast 27 C, this version was designed with enhanced flow characteristics and a consistency that allows it to be placed by pump casting.   Product characteristics and advantages include:

  • Moderate density
  • Good physical strength
  • Good volume stability
  • Impact resistance
  • Rapid installation by pumping

Available Internationally As:  Plico® Castable 27 CP KK

 Plibrico SDS Link – https://plibri.co/3ewoBYw

/by

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®Super F AB58%2900F / 1590CSDS
    Plibrico®60 AB58%3100F / 1705CSDS
    Plibrico®80 AB78%3200F / 1760CSDS
    Plibrico®90 AB90%3400F / 1871CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®55 S54%3000F / 1648CSDS
    Plibrico®68 S68%3100F / 1705CSDS
    Plibrico®68 SA68%3100F / 1705CSDS
    Plibrico®85 S Special83%3300F / 1815CSDS
    Plibrico®90 S90%3400F / 1870CSDS
    Plibrico®SiC 80(80% SiC)2700F / 1480CSDS

    (fine grain – soft)

    Product Name%Al2O3Service LimitSDS
    Plibrico®SR 6868%3100F / 1705CSDS
    Plibrico®SR 8583%3300F / 1815CSDS
    Plibrico®SR 9088%3400F / 1870CSDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®Super F AB43%2900F / 1595CSDS
    Plibrico HyRATE®60 AB60%3100F / 1705CSDS
    Plibrico HyRATE®80 AB78%3200F / 1760CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®68 S68%3100F / 1705CSDS
    Plibrico HyRATE®85 S Special84%3300F / 1815CSDS