Service Temperature Limit

3100°F

Installation Method

Casting or Pumping

Shelf Life

9 months

Industries

Aluminum, Steel, Mineral Processing, Off Gas, Waste-To-Energy

Best Applications

A wide range of applications in industrial processes including:

  1. Aluminum furnaces – non-metal contact areas
  2. Mineral Processing Kilns – alumina, cement and aggregate calcining
  3. Steel/Ferrous – reheat/forge furnace hearths, jambs, lintels, sills roof and walls. Pipe covering. Ladles.
  4. Thermal oxidizers and incinerators– inlets and burner cones, combustion chambers, choke rings.
  5. Biomass Furnaces – Walls, combustion chamber, and tuyeres

Product Information

Plicast® Fast Track 65-31 is a mullite based, ultra-low cement castable designed to be put into service more rapidly than traditional low and ultra-low cement materials.   Cure times can be reduced to 4 hours!   However, for ideal physical characteristics 8 hours is recommended.   After curing, heat can be as fast as 100°F/hr with no temperature hold – refer to Plibrico Bake Out Schedule FT for specifics.   Other product characteristics include:

  • Hot strength at elevated temperatures
  • Low abrasion loss
  • Good resistance to alkali attack and slags

Plicast Fast Track 65-31 has good flow and setting characteristics allowing it to be place by vibration, casting or pumping.

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®Super F AB58%2900F / 1590CSDS
    Plibrico®60 AB58%3100F / 1705CSDS
    Plibrico®80 AB78%3200F / 1760CSDS
    Plibrico®90 AB90%3400F / 1871CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®55 S54%3000F / 1648CSDS
    Plibrico®68 S68%3100F / 1705CSDS
    Plibrico®68 SA68%3100F / 1705CSDS
    Plibrico®85 S Special83%3300F / 1815CSDS
    Plibrico®90 S90%3400F / 1870CSDS
    Plibrico®SiC 80(80% SiC)2700F / 1480CSDS

    (fine grain – soft)

    Product Name%Al2O3Service LimitSDS
    Plibrico®SR 6868%3100F / 1705CSDS
    Plibrico®SR 8583%3300F / 1815CSDS
    Plibrico®SR 9088%3400F / 1870CSDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®Super F AB43%2900F / 1595CSDS
    Plibrico HyRATE®60 AB60%3100F / 1705CSDS
    Plibrico HyRATE®80 AB78%3200F / 1760CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®68 S68%3100F / 1705CSDS
    Plibrico HyRATE®85 S Special84%3300F / 1815CSDS