Pligun CL 5-F KK
Installation Method: Gunning
Shelf Life: 9 months
Industries: Mineral Processing, Cement, Lime
Best Applications: High Temperature applications in industrial processes where there is a requirement for normal duty refractories with some alkali reaction potential, including:
Stage 1 through 4 Cyclones and Ducts
Lower Preheat and Pre-calciner Risers
Tertiary Air Ducts
Plibrico TDS Link – https://plibri.co/3t9yrHu
Product Information: Pligun® CL 5-F KK is a super-duty gun mix specially formulated with 5% SiC in the refractory matrix. The SiC infused matrix gives this material a heightened performance against alkali attack in normal duty service cement-lime mineral processing applications where, traditionally, conventional gun mixes were once used. Enhanced gun mixes such as Pligun CL 5-F KK are becoming more important as the trend toward alternate fuel utilization becomes more prevalent. Alternative fuel impurities can accelerate build up on refractory surfaces, leading to a premature life-span of the lining. The application of SiC fines into the refractory matrix aids in extending the refractory life by forming a glassy Si layer which reacts with the alkali and seals the refractory against further alkali, sulfate, or chloride penetration.
Product advantages include:
Good gunning characteristics
Good strength to density ratio
Moderate Thermal Expansion
Moderate Thermal Conductivity
Improved alkali corrosion resistance over traditional standard gun mixes
Available Internationally As: Plico® Gun Mix CL 5-F KK
Plibrico SDS Link – https://plibri.co/3r3fwMr