Pligun Fast Track SiC 80 TM
Product: Pligun Fast Track SiC 80 TM
Product #: 3306
Service Temperature Limit: 2700°F
Installation Method: Gunning, Hand Packing, Troweling
Shelf Life: 9 months
Industries: Power Generation, Waste-to-Energy, Incineration, Boilers
Best Applications: Engineered for operations that require high refractory thermal conductivity. Typical applications include initial installation and maintenance:
- Water wall studded tube protection in waste incinerators and boilers
- Applications requiring a high conductivity refractory
Plibrico TDS Link – https://plibri.co/3K8wzHV
Product Information: Pligun® Fast Track SiC 80 TM is an 80% silicon carbide gun mix. This versatile product exhibits good gunning characteristics and is also designed for micro applications. You can apply via hand packing or troweling for small applications and tight areas like behind boiler tubes and studs. This material may be dried out / heated on an accelerated schedule and minimum cure time. Cure times can be reduced to 4 hours! However, for ideal physical characteristics a longer cure time is recommended. Product advantages include:
- Good mechanical strength
- High thermal conductivity
- Resistance to acid slag corrosion
- Can be installed by hand packing or troweling
- Fast Fire: Shortened bake-out schedule
- Versatile material that can be installed with multiple methods
Available Internationally As: Plico Gun Mix Fast Track SiC 80 TM
Plibrico SDS Link – https://plibri.co/3PQubH3