Pligun HyREZIST TS Mix

Available Internationally As: Plico Gun HyREZIST TS Mix
Class: Abrasion Resistant Castable Refractories and Gun Mixes
Category: HyREZIST Castable Refractories and Gun Mixes
Type: Abrasion Resistant

Service Temperature Limit

2500°F

Installation Method

Gunning

Shelf Life

9 months

Industries

Power Generation, Refining, Off Gas

Best Applications

  • Wet Bottom ash hoppers
  • Incinerator and thermal oxidizer quench zones
  • Circulating Fluidized Bed (CFB) boilers – cyclones and downcomers
  • Alumina calciners
  • Aggregate and clay dryers and calciners
  • FCC units – seal pots and water spray ducts

Product Information

Pligun® HyREZIST® TS Mix is a thermal shock resistant gunning material based around a fused silica/mullite matrix with a modified high cement bond.   This formulation allows for both good gunning characteristics and physical properties, as well as excellent thermal cycling resistance.   Maximum service limit for cycling is 2500°F while the optimum cycling performance range is 1500°F to 2300°F.   Product advantages include:

  • Excellent thermal cycling resistance
    • Low thermal expansion
    • High fracture resistance: 1500°F to 2300°F
  • Good physical strength and abrasion resistance
  • No special gunning installation requirements
Pligun HyREZIST 3000 Pli-Shot HyREZIST 3000 KK

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®Super F AB58%2900F / 1590CSDS
    Plibrico®60 AB58%3100F / 1705CSDS
    Plibrico®80 AB78%3200F / 1760CSDS
    Plibrico®90 AB90%3400F / 1871CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®55 S54%3000F / 1648CSDS
    Plibrico®68 S68%3100F / 1705CSDS
    Plibrico®68 SA68%3100F / 1705CSDS
    Plibrico®85 S Special83%3300F / 1815CSDS
    Plibrico®90 S90%3400F / 1870CSDS
    Plibrico®SiC 80(80% SiC)2700F / 1480CSDS

    (fine grain – soft)

    Product Name%Al2O3Service LimitSDS
    Plibrico®SR 6868%3100F / 1705CSDS
    Plibrico®SR 8583%3300F / 1815CSDS
    Plibrico®SR 9088%3400F / 1870CSDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®Super F AB43%2900F / 1595CSDS
    Plibrico HyRATE®60 AB60%3100F / 1705CSDS
    Plibrico HyRATE®80 AB78%3200F / 1760CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®68 S68%3100F / 1705CSDS
    Plibrico HyRATE®85 S Special84%3300F / 1815CSDS