Plistix ABR

Service Temperature Limit

2500°F

Installation Method

Ramming or Vibration Casting

Shelf Life

3 months

Industries

Power Generation, Boiler, Incineration, Petrochemical, Refining, Off Gas, Aluminum, Steel, Mineral Processing, Kiln, Pulp & Paper

Best Applications

Extreme environments where sever conditions require high abrasion resistance.   Applications in various industrial processes including:

  1. Thin wall linings with hex mesh or S-bar anchoring systems
  2. Cyclones
  3. Pipe and elbow linings
  4. Chutes and ducts
  5. Nozzles
  6. Wear pads

Product Information

Plistix ABR is an ultra abrasion-resistant castable refractory.   This castable utilizes a hybrid calcium aluminate/phosphate bond and is designed to yield high strength and abrasion resistance over a wide temperature range.   The material can be installed by ramming, tamping or vibration casting.   Bake out is per Plibrico Schedule C or C Linear.   Plistix ABR product advantages include:

  • Low, uniform abrasion loss of 3cc or less, from room temperature to over 2000°F
  • High crushing strength and hot MOR
  • Single component system “just add water”
/by

Plistix 900 F

Product: Plistix 900 F
Product #: 17505

Service Temperature Limit: 3400°F

Installation Method: Brushing, Spraying, Injecting, Troweling, Tamping
Shelf Life: 12 months

Industries: Mineral Processing, Aluminum, Steel, Power Generation, Boilers, Incineration, Off-Gas, Foundry

Best Applications: Great in every industry as a repair and servicing material. Approximate mixing water additions for installation requirements:

  1. Thin brush coat/spray/injection: 16% – 22%
  2. Thick brush coat: 14% – 15%
  3. Troweling: 12% – 15%
  4. Putty: 10% – 12%

Plibrico TDS Link – http://bit.ly/2HfeF6K

Product Information: Plistix™️ 900 F is a versatile high temperature service mix. Based on a corundum aggregate and matrix, with a phosphate bond, it has applications in furnaces, boilers and process vessels in virtually every industry. Supplied as a damp powder, it is mixed with water to various consistencies to be used as a coating, grout, putty and mortar. Use this material to service and repair cracks, spalls and worn refractories … it can also function as a bonding enhancer with plastic repairs. Product advantages include:

  • 3400°F serviced limit
  • High alumina and low iron content
  • Good adherence and bonding strength
  • Good resistance to acids and slags
  • Non-wetting to aluminum

Available Internationally As: Plico®️ Stix 900 F

Plibrico SDS Link – http://bit.ly/2YWWTjE

/by

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®Super F AB58%2900F / 1590CSDS
    Plibrico®60 AB58%3100F / 1705CSDS
    Plibrico®80 AB78%3200F / 1760CSDS
    Plibrico®90 AB90%3400F / 1871CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®55 S54%3000F / 1648CSDS
    Plibrico®68 S68%3100F / 1705CSDS
    Plibrico®68 SA68%3100F / 1705CSDS
    Plibrico®85 S Special83%3300F / 1815CSDS
    Plibrico®90 S90%3400F / 1870CSDS
    Plibrico®SiC 80(80% SiC)2700F / 1480CSDS

    (fine grain – soft)

    Product Name%Al2O3Service LimitSDS
    Plibrico®SR 6868%3100F / 1705CSDS
    Plibrico®SR 8583%3300F / 1815CSDS
    Plibrico®SR 9088%3400F / 1870CSDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®Super F AB43%2900F / 1595CSDS
    Plibrico HyRATE®60 AB60%3100F / 1705CSDS
    Plibrico HyRATE®80 AB78%3200F / 1760CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®68 S68%3100F / 1705CSDS
    Plibrico HyRATE®85 S Special84%3300F / 1815CSDS