Pligun Fast Track SiC HP8
Product: Pligun Fast Track SiC HP8
Product #: 3307
Service Temperature Limit: 2700°F
Installation Method: Gunning
Shelf Life: 9 months
Industries: Power Generation, Waste-to-Energy, Incineration, Boilers
Best Applications: Engineered for operations that require high refractory thermal conductivity. Typical applications include:
- Initial Installation
- Water wall studded tube protection in waste incinerators
- Water wall studded tube protection in boilers
- Gunning Maintenance
- Water wall studded tube protection in waste incinerators
- Water wall studded tube protection in boilers
- Any other application requiring a high conductivity refractory
Plibrico TDS Link – https://plibri.co/3dF8EDC
Product Information: Pligun® Fast Track SiC HP8 is an 80% silicon carbide, high performance gun mix. This product was developed to meet the demanding specifications for waste incineration boiler tube sheet refractory. Independently evaluated against other competitive materials, Pligun Fast Track SiC HP8 achieved and excelled in many areas. This material may be dried out / heated on an accelerated schedule and minimum cure time. Cure times can be reduced to 4 hours! However, for ideal physical characteristics a longer cure time is recommended. Product advantages include:
- High mechanical strength – both hot and cold
- High thermal conductivity
- Relatively low abrasion loss
- Resistance to acid slag corrosion
- Good gunability and low rebound
- Capable of rapid start-up using accelerated dry-outs
Available Internationally As: Plico Gun Mix Fast Track SiC HP8
Plibrico SDS Link – https://plibri.co/3A9yIyf