Product: Redline Redphos 70A Mortar

Product #: 59002

Service Temperature Limit: 

Aluminum Contact –  1700°F

Non-Contact – 3150°F

Shelf Life: 6 months

Product Information: Redline Redphos 70A Mortar is a mullite based, high alumina, phosphate bonded wet mortar.   Exhibits excellent non-wetting properties and good strength.   It can be used for laying high and extra high alumina brick as well as for a protective brush coating on existing refractory surfaces.

Product: Redline Redbond 3000

Product #: 58002

Service Temperature Limit:  3000°F

Shelf Life: 9 months

Product Information: Redline™ Redbond 3000 is a wet, air setting, super duty refractory mortar.   Coverage 350-400lb (160-180 kg) per 1000 standard firebrick.   May be used for hot spot/fill injection with a suitable grout pump.

Product: PliFlow HyMOR SiC 70 KK

                SiC Demon Mortar 85 Dry

Product #: 14805 (PliFlow)

                   17011 (Mortar)

 Service Temperature Limit: 2900°F

 Installation Method:  Pouring, Pumping and Troweling

Shelf Life:  6 months

 Industries:  Waste-to-Energy, Boilers

Best Applications:  These high silicon carbide products are recommended for applications that include:

  1. Waste-to-Energy Boilers
  2. Backfilling behind silicon carbide tile (PliFlow)
  3. Adhering silicon carbide tile to a surface (Mortar)

 Plibrico TDS Link – (PliFlow)


Product Information: PliFlow™ HyMOR® SiC 70 KK is a 70% silicon carbide, self-flowing/self-leveling low cement castable.   SiC Demon® Mortar 85 Dry is a dry, high silicon carbide content refractory mortar.   Both products have high thermal conductivity to support efficient thermal transfer.   Product advantages include:

  • High thermal conductivity
  • Resistance to corrosion from gases at low temperatures
  • Good fracture toughness

Available Internationally As:  Plico® Flow LC SiC 70 KK

                                                  SiC Demon® Mortar 85 Dry

 Plibrico SDS Link – (PliFlow)


Product: NEW: Ultra Demon Air Set Wet Mortar

Product#: 17005

Service Temperature Limit: 3000°F

Installation Method: Troweling, Dipping

Shelf Life: 9 months

Industries: Aluminum, Power Generation, Off-Gas, Steel, Mineral Processing, Boilers, Incineration

Best Applications: Engineered for strength and extended workability. Typical applications include laying up intermediate, high duty and super duty fireclay brick:

  1. Boilers
  2. Incinerators/Thermal oxidizers
  3. Heat treat and reheat furnaces
  4. Homogenizing/Forge furnaces
  5. Precast shapes installation

Plibrico TDS Link

Product Information: Ultra Demon Air Set Wet Mortar is an enhanced wet, air setting, super duty refractory mortar. Creamier in texture as compared to other mortars, the material has been engineered to be incredibly pliable giving it a more predictable consistency over time – only a 5% workability difference at 100 days. This versatile material is 2X stronger to better bond bricks together and can also be used for hot spot/fill injection with a suitable grout pump. Other product advantages include:

  • Impressive workability score: 46% better 45-day workability
  • High bonding strength
  • Workable, creamier texture
  • Excellent adhesion properties
  • Good coverage at 350-400lb (160-180 kg) per 1000 standard firebrick

Available Internationally As: Ultra Demon Air Set Wet

Plibrico SDS Link

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®Super F AB58%2900F / 1590CSDS
    Plibrico®60 AB58%3100F / 1705CSDS
    Plibrico®80 AB78%3200F / 1760CSDS
    Plibrico®90 AB90%3400F / 1871CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®55 S54%3000F / 1648CSDS
    Plibrico®68 S68%3100F / 1705CSDS
    Plibrico®68 SA68%3100F / 1705CSDS
    Plibrico®85 S Special83%3300F / 1815CSDS
    Plibrico®90 S90%3400F / 1870CSDS
    Plibrico®SiC 80(80% SiC)2700F / 1480CSDS

    (fine grain – soft)

    Product Name%Al2O3Service LimitSDS
    Plibrico®SR 6868%3100F / 1705CSDS
    Plibrico®SR 8583%3300F / 1815CSDS
    Plibrico®SR 9088%3400F / 1870CSDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®Super F AB43%2900F / 1595CSDS
    Plibrico HyRATE®60 AB60%3100F / 1705CSDS
    Plibrico HyRATE®80 AB78%3200F / 1760CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®68 S68%3100F / 1705CSDS
    Plibrico HyRATE®85 S Special84%3300F / 1815CSDS