Product: Plicast HyREZIST 3000 C KK
Product #: 14154
Service Temperature Limit: 3000oF
Installation Method: Casting
Shelf Life: 6 months
Industries: Mineral Processing, Power Generation, Waste-to-Energy, Incineration
Best Applications: This material is engineered for low to intermediate temperature industrial processes/applications, these include:
- Cement kilns – preheat zones, firing hoods, and clinker coolers
- Mineral Processing Kilns and Dryers – alumina, clay, coal, and aggregate
- Utility Boilers – ash hopper linings
- Fluidized Bed Combustors/Boilers
- Incinerators and Thermal Oxidizers
Plibrico TDS Link – https://plibri.co/4b0xrKJ
Product Information: Plicast®️ HyREZIST®️ 3000 C KK is a 55% alumina, course grained, hybrid bond castable. Designed to be a user friendly castable, it utilizes a high cement content with silica fume and dispersants to maintain its physical properties over a wide water range. While engineered for low to intermediate temperature use, Plicast HyREZIST 3000 C KK performs favorably as compared to conventional super duty castables with service temperatures 2000°F to 3000°F, making this material a versatile option for numerous applications. Product advantages include:
- Moderate density
- Excellent strength – cold and hot, from room temperature thru intermediate temperatures <2000°F
- Very good, consistent abrasion resistance though the same range <10cc loss
- Low iron content for use in reducing environments
- Installation versatility with a wide water range
Available Internationally As: Plico® Castable HyREZIST 3000 C KK
Plibrico SDS Link – https://plibri.co/44201cv
Service Temperature Limit
2500°F
Installation Method
Gunning
Shelf Life
9 months
Industries
Power Generation, Refining, Off Gas
Best Applications
- Wet Bottom ash hoppers
- Incinerator and thermal oxidizer quench zones
- Circulating Fluidized Bed (CFB) boilers – cyclones and downcomers
- Alumina calciners
- Aggregate and clay dryers and calciners
- FCC units – seal pots and water spray ducts
Product Information
Pligun® HyREZIST® TS Mix is a thermal shock resistant gunning material based around a fused silica/mullite matrix with a modified high cement bond. This formulation allows for both good gunning characteristics and physical properties, as well as excellent thermal cycling resistance. Maximum service limit for cycling is 2500°F while the optimum cycling performance range is 1500°F to 2300°F. Product advantages include:
- Excellent thermal cycling resistance
- Low thermal expansion
- High fracture resistance: 1500°F to 2300°F
- Good physical strength and abrasion resistance
- No special gunning installation requirements
Product: Pligun HyREZIST 3000
Product #: 13615
Service Temperature Limit: 3000°F
Installation Method: Gunning
Shelf Life: 9 months
Industries: Mineral Processing, Power Generation Boilers, Incineration, Off Gas, Thermal Oxidizers
Best Applications: Great Solution for intermediate temperature applications in thermal processes, including:
- Cement kilns – preheat zones, firing hoods, and coolers
- Mineral Processing Kilns & Dryers – alumina, clay, coal and aggregate
- Utility Boilers – Ash hopper linings
- Fluidized Bed Combustors / Boilers
- Incinerators and Thermal Oxidizers
Plibrico TDS Link – https://plibri.co/2PwTVPk
Product Information: Pligun® HyREZIST® 3000 KK is a 55% alumina gun mix. Engineered for strength and abrasion resistance, this high purity, high cement content material combines silica fume and dispersants with a super duty aggregate to maintain its physical properties over a wide water range.
While engineered for low to intermediate temperature uses, Pligun HyREZIST 3000 performs favorably as compared to conventional super duty gun mixes with service temperatures 2000°F to 3000°F, making this a versatile option for numerous applications.
Product characteristics and advantages include:
- Moderate density
- Very good strength: cold and hot, from room temperature through intermediate temperatures of 2000°F
- Very good abrasion resistance
- Good volume stability and thermal cycling resistance
- Low iron content for use in reducing environments
- Good water tolerance and gunability
Available Internationally As: Plico® Gun HyREZIST 3000
Plibrico SDS Link – https://plibri.co/3e2DHHp
Product: Pligun HyREZIST 2700 KK
Product #: 13601
Service Temperature Limit: 2700°F
Installation Method: Gunning
Shelf Life: 9 months
Industries: Mineral Processing, Power Generation Boilers, Incineration, Off Gas, Thermal Oxidizers
Best Applications: Great solution for low to intermediate temperature applications in industrial thermal processes including:
- Cement kilns – preheat zones, firing hoods and coolers
- Mineral Processing Kilns and Dryers – alumina, clay, coal and aggregate
- Utility Boilers – ash hopper linings
- Fluidized Bed Combustors/Boilers
- Incinerators and Thermal Oxidizers
Plibrico TDS Link – https://plibri.co/2YioN7p
Product Information: Pligun® HyREZIST® 2700 is a 50% alumina gun mix. Engineered for strength and abrasion resistance, the modified matrix includes calcined super duty aggregate and medium purity calcium aluminate cement. As a product from the HyREZIST family, the material possesses many of the same physical characteristics and attributes as other HyREZIST castables and gun mixes, including:
- Moderate density
- Very good strength: cold and hot, from room temperature thru intermediate temperatures <2000°F
- Very good, consistent abrasion resistance though the range <10cc @ 1500°F
- Low iron content for use in reducing environments
- Good volume stability
- Good thermal cycling resistance
- Good gunability and low rebound
While primarily designed for low to intermediate temperature use, Pligun HyREZIST 27000 performs similarly to conventional super duty gunning castables above 2000°F to its service limit, making this a versatile and economic product option for numerous applications.
Available Internationally As: Plico® Gun HyREZIST 2700
Plibrico SDS Link – https://plibri.co/31ckBIo
Product: Plicast HyREZIST 3000 KK
Product #: 14099
Service Temperature Limit: 3000°F
Installation Method: Casting or Pumping
Shelf Life: 6 months
Industries: Mineral Processing, Power Generation, Waste-to-Energy, Incineration
Best Applications: This material performs best in low to intermediate temperature industrial processes/applications including:
- Cement kilns – preheat zones, firing hoods and coolers
- Mineral Processing Kilns and Dryers – alumina, clay, coal and aggregate
- Utility Boilers – ash hopper linings
- Fluidized Bed Combustors/Boilers
- Incinerators and Thermal Oxidizers
While engineered for low to intermediate temperature use, Plicast HyREZIST 3000 KK performs favorably as compared to conventional super duty castables with service temperatures 2000°F to 3000°F, making this material a versatile option for numerous applications.
Plibrico TDS Link – http://bit.ly/2UormUb
Product Information: Plicast®️ HyREZIST®️ 3000 KK is a 55% alumina, hybrid bond castable. Designed to be a user friendly castable, it utilizes a high cement content with silica fume and dispersants to maintain its physical properties over a wide water range. Product characteristics and advantages include:
- Moderate density
- Excellent strength – cold and hot, from room temperature thru intermediate temperatures <2000°F
- Very good, consistent abrasion resistance though the same range <10cc loss
- Low iron content for use in reducing environments
- Installation versatility with a wide water range – vibration cast, cast or pump
Available Internationally As: Plico®️ Castable HyREZIST 3000 KK
Plibrico SDS Link – http://bit.ly/36T2t5N