Service Temperature Limit

2500^oF

Installation Method

Gunning

Shelf Life

6 months

Industries

Aluminum, Steel, Power Generation, Off Gas, Incineration, Boilers

Best Applications

For hot and cold maintenance and repair of refractories in various industrial processes including:

1. Aluminum furnaces including melting zones, upper walls roofs, jambs and sills
2. Mineral Processing Kilns
3. Boilers
4. Incinerators and Thermal Oxidizers
5. Reheat and Heat-Treating Furnaces

Product Information

Exo-Set UNO M G is a mullite based, chemical bonded gun mix.   It utilizes a dry phosphate bonding system which only requires water for activation.   Exo-Set UNO M G has very good gunning characteristics should be gunned without pre-dampening.   Please refer to Plibrico Installation Guideline “Exo-Set UNO Series Gun Mixes” (TB-IGII-EXG) for specific gunning instructions.   Exo-Set UNO M G product advantages include:

• Good adherence and re-bond strength on old and worn refractory surfaces
• Rapid setting and no minimum time before initial heating
• May be gunned hot or cold
• Excellent resistance to aluminum attack and penetration
• Good hot strength through aluminum processing temperatures

Product: Exo-Set UNO B G

Product #: 17438

Service Temperature Limit:  2500°F

Installation Method:  Gunning

Shelf Life:  6 months

Industries:  Aluminum, Steel, Power Generation, Boilers, Off Gas, Incineration

Best Applications:  Engineered and developed for severe application repairs, this gun mix can be used for both hot and cold maintenance/repair of refractories in various industrial processes, including:

1. Aluminum furnace melt zones; upper walls, sills, and roofs
2. Mineral processing kilns
3. Incinerators
4. Boilers
5. Reheat and Heat-treating Furnaces
6. Incinerators

Plibrico TDS Link – https://plibri.co/3eet83R

Product Information: Exo-Set UNO B G is a bauxite-based, chemically bonded castable refractory.   It utilizes a dry phosphate bonding system only requiring water for activation and has excellent adherence to worn refractory surfaces.   Exo-Set UNO B G also has excellent gunning characteristics.   This material should be gunned without pre-dampening, please refer to Plibrico Installation Guidelines “Exo-Set UNO Series Gun Mixes” (TB-IGII-EXG) for specific gunning instructions.   Exo-Set UNO B G product advantages include:

• Excellent adherence and re-bond strength on spalled and worn refractory surfaces
• Requires minimal surface preparation prior to gunning
• Designed to be gunned both hot and cold
• Rapid setting with no minimum time before initial heating
• Excellent resistance to aluminum attack and penetration
• Good hot strength through aluminum processing temperatures
• Good thermal spall resistance

Available Internationally As:  Exo-Set UNO B G

Plibrico SDS Link – https://plibri.co/3xHVbAy

Product: Exo-Set UNO A G
Product #: 17445

Service Temperature Limit: 2500°F

Installation Method: Gunning
Shelf Life: 6 months

Industries: Aluminum, Power Generation, Boilers, Incineration, Off-Gas

Best Applications: Developed and designed to repair and resurface aluminum furnace walls both below and above the metal line, this material can also be used effectively for both hot and cold maintenance or repair of refractories in various industrial processes including:

1. Aluminum Furnaces including melting zones, upper walls roofs, jambs and sills
2. Mineral Processing Kilns
3. Boilers
4. Incinerators and Thermal Oxidizers
5. Reheat and Heat-Treating Furnaces

Plibrico TDS Link – http://bit.ly/2kENY3k

Product Information: Exo-Set UNO A G is a corundum based, chemical bonded gun mix. It utilizes a dry phosphate bonding system which only requires water for activation. Exo-Set UNO A G has excellent gunning characteristics. This material should be gunned without pre-dampening – refer to Plibrico Installation Guideline “Exo-Set UNO Series Gun Mixes” (TB-IGII-EXG) for specific gunning instructions. Exo-Set UNO A G product advantages include:

• Excellent adherence and strong re-bond strength on spalled and worn refractory surfaces
• Requires minimal surface preparation prior to gunning
• Rapid setting and no minimum time before initial heating
• Designed to be gunned both hot and cold
• Superior resistance to aluminum attack and penetration
• Good hot strength through aluminum processing temperatures
• Very good thermal spall resistance

Available Internationally As: Exo-Set UNO A G

Plibrico SDS Link – http://bit.ly/2kDL4Mq