Plicast 70

Product: Plicast 70

Product #: 3309

Service Temperature Limit:   3100oF

Installation Method:  Casting

Shelf Life: 9 months

 

Industries: Steel, Mineral Processing, Boilers

Best Applications: Engineered for high temperature applications and general refractory uses over a wide range of applications, these include:

  1. Precast Burner Throats
  2. Precast Boiler Components
  3. Annealing & Homogenizing Furnace Base
  4. Gypsum Kettle Side Walls
  5. Water-Tube Boiler Floors

Plibrico TDS Link – https://plibri.co/4aPW6lL 

Product Information:  Plicast® 70 is a solid conventional castable.   With a high temperature service limit, this alumina enriched, mullite-based, high strength material offers very good volume stability.   It comes with an economical cost to meet a broad range of applications.   Product advantages include:

  • Great strength
  • Very good volume stability
  • Good thermal conductivity for a mullite based product
  • Easy to install

Available Internationally As: Plico® Castable 70

 

Plibrico SDS Link – https://plibri.co/3JgqI3A

 

/by

Durafloor II

Product: Durafloor II

Product #: 3321

 Service Temperature Limit: 2000°F

 Installation Method:  Casting or Pumping

Shelf Life:  12 months

 Industries:  Aluminum, Steel, Foundry

Best Applications:  Engineered for hot flooring and splash pad applications around furnaces and casting pits.   Typical applications include:

  1. Rotary Furnace Vestibules
  2. Casting Carousel Floors
  3. Sow Cooling Stations
  4. Dross Pads / Floors
  5. Oxidizer Floors

Plibrico TDS Link – https://plibri.co/41TP8bA

Product Information: Durafloor™ II is a pumpable fireclay castable specifically designed for hot flooring and splash pad applications. This material is engineered specifically for flooring applications which are subject to high degrees of thermal shock due to molten metal spillage, hot castings, or dross. Durafloor II maintains good strength, abrasion, and spall resistance from ambient temperatures to +1800°F. This unique castable differs from other conventional materials in that it performs extremely well in an unfired, or green condition. Durafloor II develops strength rapidly with a minimum cure period. The quick cure time allows the area to be used in as little as 16 hrs. For maximum hydraulic strength, a full cure is required, and is attained after 48 hrs. Durafloor II may be installed by casting and/or pumping. Product advantages include:

  • High cured crushing strength: 4000+ psi @ 24hrs, 7000+ psi @ 48 hr
  • Very good low temperature abrasion resistance: 8cc @500°F
  • Excellent hot splash spall resistance
  • Thermal cycling resistant

Available Internationally As:  Durafloor II

 Plibrico SDS Link – https://plibri.co/47CdEzm

/by

Redline Redcast Durafloor

Product: Redline Redcast Durafloor

Product #: 50104

Service Temperature Limit:  1800°F

Shelf Life: 12 months

Product Information: Redline Redcast Durafloor is a coarse aggregate material which features high strengths and abrasion resistance at low temperatures.   It is engineered specifically for flooring applications which are subject to high degrees of thermal shock due to molten metal spillage, hot castings, or dross.   This unique castable differs from other conventional materials in that it performs extremely well in an unfired, or green condition.

/by

Redline Redcon 60

Product: Redline Redcon 60

Product #: 51101

Service Temperature Limit:  3100°F

Shelf Life: 9 months

Product Information: Redline Redcon 60 is a conventionally bonded, high alumina, high strength castable that has been engineered for service conditions at elevated temperatures.   Applications include: heat treating and forging furnaces, burner blocks, and most heating equipment.

/by

Redline Redcon 2800

Product: Redline Redcon 2800

Product #: 51102

Service Temperature Limit:  2800°F

Shelf Life: 12 months

Product Information: Redline Redcon 2800 is a super duty, conventionally bonded castable.   It was engineered for applications which require good strengths and abrasion resistance.   Some common applications include: upper walls and roofs of aluminum melting and holding furnaces, doors, and flues.   It is also well suited for many boiler applications.

/by

Redline Firebrand White

Product: Redline Firebrand White

Product #: 50103

Service Temperature Limit:  1800°F

Shelf Life: 12 months

Product Information: Redline™ Firebrand White is a medium aggregate, low duty fireclay castable which features good strengths at low temperatures.   This material is specially formulated for use in wood burning stoves, gas burning pizza ovens, and small crucible hobby furnaces.   It can be placed in situ or used in the manufacture of pre-cast shapes.

/by

Redline Firebrand

Product: Redline Firebrand

Product #: 50102

Service Temperature Limit:  1800°F

Shelf Life: 12 months

Product Information: Redline™ Firebrand is a medium aggregate, low duty fireclay castable which features good strengths at low temperatures.   This material is specially formulated for use in wood burning stoves and fireplaces.   It can be placed in situ or used in the manufacture of pre-cast shapes.

/by

Redline Firebrand Gray

Product: Redline Firebrand Gray

Product #: 50101

Service Temperature Limit:  1800°F

Shelf Life: 12 months

Product Information: Redline™ Firebrand Gray is a medium aggregate, low duty fireclay castable which features good strengths at low temperatures.   This material is specially formulated for use in wood burning stoves and fireplaces.   It can be placed in situ or used in the manufacture of pre-cast shapes.

/by

Plicast 31 RS

Product: Plicast 31 RS

Product #: 14007

Service Temperature Limit:  2800°F

Installation Method:  Casting

Shelf Life: 12 months

Industries: Steel, Mineral Processing, Refining, Boilers, Foundry, Pulp & Paper, Sugar, Power Generation, Incineration

Best Applications:  Engineered for precast shapes that are used in higher temperature, intermediate duty, general refractory applications.   Typical applications include:

  1. Boiler baffles, floors, and cells
  2. Incinerators
  3. Dryers and Calciners
  4. Gypsum Kettles
  5. Homogenizing and annealing furnaces
  6. Flues
  7. Fluid bed combustors
  8. Cement clinker coolers

Plibrico TDS Link – https://plibri.co/3Jbnxcu

Product Information: Plicast® 31 RS is a well-proven, refractory material veteran that has been optimized for casting shapes.   This first quality, high strength castable refractory has a special matrix that supports the strong edges and sharp corners required for a great precast shape.   Plicast 31 RS offers balanced properties at an economical cost to meet a broad range of service conditions at higher operating temperatures.   Product advantages include:

  • 2800°F service limit
  • Good strength to density ratio for economical use
  • Good volume stability
  • Moderate thermal expansion
  • Moderate thermal conductivity

Available Internationally As: Plico Castable 31 RS

Plibrico SDS Link – https://plibri.co/3PZLVjx

/by

Plicast Tuff Mix P KK

Product: Plicast Tuff Mix P KK

Product #: 14248

Service Temperature Limit:  2500°F

Installation Method:  Pumping

Shelf Life: 6 months

Industries: Power Generation, Steel, Aluminum, Mineral Processing, Refining, Off Gas, Foundry, Pulp & Paper, Sugar, Incineration, Boilers

Best Applications: Engineered for intermediate duty, this material works excellent in general refractory uses, applications include:

  1. Incinerators
  2. Boilers
  3. Fluid bed combustors
  4. Dryers and calciners
  5. Homogenizing and annealing furnaces
  6. Stacks
  7. Gypsum kettles

Plibrico TDS Link – https://plibri.co/3KaOi0I

Product Information: Plicast® Tuff Mix P KK is a pumpable version of a Plibrico industry standard castable mix (Plicast Tuff Mix).  This very versatile refractory is great for general use up to 2500°F, and possesses moderate density, good strength, as well as excellent castability.   Designed for easy installation, Plicast Tuff Mix P has applications across nearly every industry.   Product advantages include:

  • Good strength-to-density ratio for economical use
  • Good volume stability
  • Moderate thermal expansion
  • Moderate thermal conductivity
  • Good water range for ease of installation  

Available Internationally As: Plico Castable Tuff Mix P KK

Plibrico SDS Link – https://plibri.co/3GxKtRi

/by

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®Super F AB58%2900F / 1590CSDS
    Plibrico®60 AB58%3100F / 1705CSDS
    Plibrico®80 AB78%3200F / 1760CSDS
    Plibrico®90 AB90%3400F / 1871CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®55 S54%3000F / 1648CSDS
    Plibrico®68 S68%3100F / 1705CSDS
    Plibrico®68 SA68%3100F / 1705CSDS
    Plibrico®85 S Special83%3300F / 1815CSDS
    Plibrico®90 S90%3400F / 1870CSDS
    Plibrico®SiC 80(80% SiC)2700F / 1480CSDS

    (fine grain – soft)

    Product Name%Al2O3Service LimitSDS
    Plibrico®SR 6868%3100F / 1705CSDS
    Plibrico®SR 8583%3300F / 1815CSDS
    Plibrico®SR 9088%3400F / 1870CSDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®Super F AB43%2900F / 1595CSDS
    Plibrico HyRATE®60 AB60%3100F / 1705CSDS
    Plibrico HyRATE®80 AB78%3200F / 1760CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®68 S68%3100F / 1705CSDS
    Plibrico HyRATE®85 S Special84%3300F / 1815CSDS