PliFlow HyMOR SiC 70 KK

Product: PliFlow HyMOR SiC 70 KK

                SiC Demon Mortar 85 Dry

Product #: 14805 (PliFlow)

                   17011 (Mortar)

 Service Temperature Limit: 2900°F

 Installation Method:  Pouring, Pumping and Troweling

Shelf Life:  6 months

 Industries:  Waste-to-Energy, Boilers

Best Applications:  These high silicon carbide products are recommended for applications that include:

  1. Waste-to-Energy Boilers
  2. Backfilling behind silicon carbide tile (PliFlow)
  3. Adhering silicon carbide tile to a surface (Mortar)

 Plibrico TDS Link – (PliFlow) https://plibri.co/pliflow-hymor-sic70kk

                                   (Mortar) https://plibri.co/sic-demon-mortar85dry

Product Information: PliFlow™ HyMOR® SiC 70 KK is a 70% silicon carbide, self-flowing/self-leveling low cement castable.   SiC Demon® Mortar 85 Dry is a dry, high silicon carbide content refractory mortar.   Both products have high thermal conductivity to support efficient thermal transfer.   Product advantages include:

  • High thermal conductivity
  • Resistance to corrosion from gases at low temperatures
  • Good fracture toughness

Available Internationally As:  Plico® Flow LC SiC 70 KK

                                                  SiC Demon® Mortar 85 Dry

 Plibrico SDS Link – (PliFlow) https://plibri.co/2NoWm1C

                                   (Mortar) https://plibri.co/3fOPxml

/by

Pliflow HyMOR 3100 Special KK

Product: Pliflow HyMOR 3100 Special KK

Product #: 14420

Service Temperature Limit:  3100°F

Installation Method:  Casting

Shelf Life:  6 months

Industries:  Steel/Non-ferrous, Mineral Processing, Medical Waste, Power Generation, Boilers, Incineration, Thermal Oxidizers, Aluminum non-contact

Best Applications:  Engineered to be used as a primary lining material in a wide range of industrial furnace and kiln applications, including:

  1. Reheat and forge furnace walls and roofs
  2. Medical waste furnace walls & roofs
  3. Incinerators & Thermal Oxidizer linings
  4. Boilers
  5. Mineral Processing Kilns
  6. Aluminum furnace non-contact areas

Plibrico TDS Link – https://plibri.co/3hAYFz2

Product Information: Pliflow™ HyMOR® 3100 Special KK is a self-flowing, low cement castable.   This material uses a propriety blend of dispersants and micro-silica particles, combined with an optimized refractory matrix to maximize flow characteristics.   It uses low water content to retain excellent physical properties.   Pliflow HyMOR 3100 Special is an excellent solution for areas where logistical challenges make it difficult to pump into hard-to-reach areas, or where vibrating is not practical but there is a need for refractory to be adequately placed behind forms.   The set-time and free-flowing characteristics of this low cement castable makes this material advantageous over other installation options that may not be possible such as gunning or conventional casting.   Product advantages include:

  • Good hot strengths
  • Excellent abrasion resistance
  • Thermal shock and fracture resistant
  • Good volume stability and moderate thermal expansion
  • Moderate resistance to alkali and slag attack

Available Internationally As:  Plico Flow LC 3100 Special KK

Plibrico SDS Link – https://plibri.co/3yjh1uv

/by

Pliflow HyMOR 3000 KK

Product: Pliflow HyMOR 3000 KK

Product #: 14256

Service Temperature Limit:  3000°F

Installation Method:  Pumping or Casting

Shelf Life: 6 months

Industries: Mineral Processing, Steel, Power Generation, Boilers, Incineration, Aluminum, Thermal Oxidizers

Best Applications:  A self-flow castable perfect for higher temperature applications in industrial processes, applications include:

  1. Mineral Processing Kilns – alumina and aggregate calcining
  2. Steel/Ferrous – reheat/forge furnace hearths, jambs, lintels, sills roof and walls; Pipe covering; Ladles
  3. Aluminum furnaces ( non-contact ) – roofs , upper walls and lintels
  4. Thermal oxidizers – inlets and burner cones, combustion chambers, choke rings
  5. Biomass Furnaces – Walls, combustion chamber, and tuyeres
  6. Boilers – including fluidized bed and recirculating fluidized bed boilers

Plibrico TDS Link – https://plibri.co/34pV2YB

Product Information: Pliflow™ HyMOR® 3000 KK is  the original “go-to” self-flowing low cement castable.    The formula has been updated over time to reflect new raw materials and additive technology.   As it was when it was first introduced, it is still a top industry performer.   Pliflow HyMOR 3000 KK is a super duty class, low cement, self-flowing castable that is based on a super duty aggregate with an enhanced matrix.   As a refractory field favorite, this self-flowing castable has been used in essentially every industry due to its excellent physical characteristics.   Product advantages include:

  • Very good cold and hot strengths
  • Low abrasion loss:  8cc per ASTM C704
  • Good hot load resistance
  • Thermal shock and fracture resistant

Available Internationally As: Plico® Flow LC 3000 KK

Plibrico SDS Link – https://plibri.co/3sUs10Q

/by

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®Super F AB58%2900F / 1590CSDS
    Plibrico®60 AB58%3100F / 1705CSDS
    Plibrico®80 AB78%3200F / 1760CSDS
    Plibrico®90 AB90%3400F / 1871CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®55 S54%3000F / 1648CSDS
    Plibrico®68 S68%3100F / 1705CSDS
    Plibrico®68 SA68%3100F / 1705CSDS
    Plibrico®85 S Special83%3300F / 1815CSDS
    Plibrico®90 S90%3400F / 1870CSDS
    Plibrico®SiC 80(80% SiC)2700F / 1480CSDS

    (fine grain – soft)

    Product Name%Al2O3Service LimitSDS
    Plibrico®SR 6868%3100F / 1705CSDS
    Plibrico®SR 8583%3300F / 1815CSDS
    Plibrico®SR 9088%3400F / 1870CSDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®Super F AB43%2900F / 1595CSDS
    Plibrico HyRATE®60 AB60%3100F / 1705CSDS
    Plibrico HyRATE®80 AB78%3200F / 1760CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®68 S68%3100F / 1705CSDS
    Plibrico HyRATE®85 S Special84%3300F / 1815CSDS