Product: Plicast HyMOR 93V KK

Product #: 14212

Service Temperature Limit:  3000°F

Installation Method:  Vibration Casting

Shelf Life: 6 months

Industries: Steel, Off-Gas, Pulp & Paper, Petrochemical, Thermal Oxidizer

Best Applications:  Engineered for applications in industrial processes including.   Typical applications include:

  1. Precast Shapes – including burner cones, piers, and impact pads– various industries
  2. Steel and Foundry – various applications including ladle impact pads
  3. Thermal Oxidizers – inlets and burner cones, combustion chambers, choke rings
  4. Sulfur Recovery Units
  5. Chemical and petrochemical vessels – including ammonia reformers

Plibrico TDS Link – https://plibri.co/3sgHtDQ

Product Information: Plicast® HyMOR®️ 93V KK is a high alumina, low cement castable.   Developed with high purity alumina aggregate, and containing essentially no silica or iron oxides, this castable ends up as one of the strongest in the line of refractories.   The key to this materials strength is the low cement technology admixtures that are combined with vibration casting installation methods.   This partnership allows for a water reduction that yields higher densities, lower porosity, and better physical attributes.   Product advantages include:

  • Very low abrasion loss < 4cc
  • High density > 182 pcf
  • Low porosity < 16%
  • Very high hot strength at elevated temperatures 2500+psi @2000°F
  • High crushing strength
  • Improved slag corrosion resistance

Available Internationally As: Plico Castable LC 93V KK

Plibrico SDS Link – https://plibri.co/3sibQdm

Product: Plicast HyMOR 85 BF C KK

Product #: 3264

 Service Temperature Limit: 3100°F

 Installation Method:  Casting

Shelf Life:  6 months

 Industries:  Aluminum, Steel, Incineration

Best Applications:  This high alumina castable and its aluminum resistant version (Plicast Al-Tuff 85 BF C) are recommended for applications that include:

  1. Precast Shapes
  2. Delta Sections
  3. Ladle Bottom Surrounds and Ladle Lip Rings
  4. Jambs and Sills in an aluminum furnace
  5. Aluminum troughs, high wear areas

 Plibrico TDS Link – https://plibri.co/plicast-hymor85bfckk

Product Information: Plicast® HyMOR® 85 BF C KK is a brown fused, high alumina based low cement castable.   This coarse grain material is engineered to provide excellent resistance to thermal cycling, impact and fracture.   Made with 85% brown fused alumina, this castable and its Al-Tuff non-wetting to aluminum version (Plicast Al-Tuff 85 BF C), also offers excellent abrasion resistance and superior strength.   Plicast HyMOR 85 BF C KK combination of strength, toughness, alumina content, and other compositional features make it an excellent product for many applications.   Product advantages include:

  • Excellent abrasion resistance < 5 cc
  • Excellent CCS and hot strength
  • High service limit 3100°F
  • High density and low shrinkage
  • Great casting properties

Available Internationally As:  Plico® Castable LC 85 BF C KK

 Plibrico SDS Link – https://plibri.co/30AzRP4

Product: PliFlow HyMOR SiC 70 KK

                SiC Demon Mortar 85 Dry

Product #: 14805 (PliFlow)

                   17011 (Mortar)

 Service Temperature Limit: 2900°F

 Installation Method:  Pouring, Pumping and Troweling

Shelf Life:  6 months

 Industries:  Waste-to-Energy, Boilers

Best Applications:  These high silicon carbide products are recommended for applications that include:

  1. Waste-to-Energy Boilers
  2. Backfilling behind silicon carbide tile (PliFlow)
  3. Adhering silicon carbide tile to a surface (Mortar)

 Plibrico TDS Link – (PliFlow) https://plibri.co/pliflow-hymor-sic70kk

                                   (Mortar) https://plibri.co/sic-demon-mortar85dry

Product Information: PliFlow™ HyMOR® SiC 70 KK is a 70% silicon carbide, self-flowing/self-leveling low cement castable.   SiC Demon® Mortar 85 Dry is a dry, high silicon carbide content refractory mortar.   Both products have high thermal conductivity to support efficient thermal transfer.   Product advantages include:

  • High thermal conductivity
  • Resistance to corrosion from gases at low temperatures
  • Good fracture toughness

Available Internationally As:  Plico® Flow LC SiC 70 KK

                                                  SiC Demon® Mortar 85 Dry

 Plibrico SDS Link – (PliFlow) https://plibri.co/2NoWm1C

                                   (Mortar) https://plibri.co/3fOPxml

Product: Pli-Shot HyMOR 3100 KK

Product #: 15248

Service Temperature Limit:  3100°F

Installation Method:  Shotcreting

Shelf Life: 6 months

Industries: Mineral Processing, Aluminum/Non-Ferrous, Power Generation, Incineration, Boilers, Kilns

Best Applications:  Terrific as a primary lining material in many industrial furnace and kiln, applications include:

  1. Reheat and forge furnace walls and roofs
  2. Aluminum furnace upper walls and roofs
  3. Incinerators
  4. Boilers
  5. Mineral processing kilns

Plibrico TDS Link – https://plibri.co/3JvGdmM

Product Information: Pli-Shot HyMOR®️ 3100 KK is a specifically designed, shotcrete version, of its very popular brother, Plicast HyMOR 3100 KK.   Like it’s castable counterpart, it is an 80% alumina,  bauxite based low cement castable.   The important difference is that it has been optimized for shotcrete application, including a longer setting time and improved pumping characteristics.   Alike its Plicast brother, Pli-Shot HyMOR 3100 KK is engineered for higher temperature applications, it’s strength profile, fracture resistance, and other characteristics make it ideal for many different uses.   Product advantages include:

  • Super hot strength at over a wide temperature range
  • Good resistance to acid to neutral slags
  • Alkali vapor resistance
  • Low abrasion loss per ASTM C704
  • Good density and low porosity
  • Good thermal shock and fracture resistance

Available Internationally As: Plico® Shotcrete LC 3100 KK

Plibrico SDS Link – https://plibri.co/3JxXrQo

Product: Pli-Shot HyMOR 3100 Special KK
Product #: 15250

Service Temperature Limit: 3100°F

Installation Method: Shotcreting
Shelf Life: 6 months

Industries: Mineral Processing, Aluminum/Non-Ferrous, Power Generation, Incineration, Boilers, Kilns

Best Applications: Used as a primary lining material in many industrial furnace and kiln applications including:

  1. Reheat and forge furnace walls and roofs
  2. Aluminum furnace upper walls and roofs
  3. Incinerators
  4. Boilers
  5. Mineral processing kilns

Plibrico TDS Linkhttp://bit.ly/35kRMta

Product Information: Pli-Shot HyMOR®️ 3100 Special KK is a specifically designed, shotcrete version, of its very popular brother, Plicast HyMOR 3100 Special KK. Like it’s castable counterpart, it is a mullite based low cement castable. The important difference is that it has been optimized for shotcrete application, including a longer setting time and improved pumping characteristics. Alike its Plicast brother, Pli-Shot HyMOR 3100 Special KK offers the following great benefits:

  • High strength – both hot and cold
  • Good hot load resistance
  • Good volume stability and moderate thermal expansion
  • Low abrasion loss <9cc loss per ASTM C704
  • Excellent thermal cycling resistance
  • Good resistance to alkali and slag attack

Available Internationally As: Plico®️ Shotcrete LC 3100 Special KK

Plibrico SDS Linkhttp://bit.ly/33olY4H

Product: Pli-Shot HyMOR 3000 KK

Product #: 15249

Service Temperature Limit: 3000°F

Installation Method:  Shotcreting

Shelf Life:  6 months

Industries:  Steel/Non-ferrous, Mineral Processing, Medical Waste, Power Generation, Boilers, Incineration, Thermal Oxidizers, Aluminum non-contact

Best Applications:  Great when used as a primary lining material.   Optimized to be used in a wide array of industrial furnace and kiln applications including:

  1. Reheat and forge furnace walls and roofs
  2. Medical waste furnace walls and roofs
  3. Incinerators and Thermal Oxidizer linings
  4. Boilers
  5. Mineral Processing Kilns
  6. Aluminum furnace non-contact areas

Plibrico TDS Link – https://plibri.co/3fsFC9k

Product Information: Pli-Shot™ HyMOR® 3000 KK is a specifically engineered shotcrete version of its workhorse brother, Plicast® HyMOR® 3000 KK.   The material has been optimized for top shotcrete application performance in the super-duty class of refractory shotcrete materials.   This Pli-Shot material has an enhanced matrix with a super-duty aggregate giving it superior properties, and making it a versatile go-to solution for a wide range of applications.   Product advantages include:

  • Low abrasion loss
  • Good hot load resistance
  • Thermal shock and fracture resistant
  • Good volume stability and moderate thermal expansion
  • Moderate resistance to alkali and slag attack

Available Internationally As:  Plico® Shotcrete LC 3000 KK

Plibrico SDS Link – https://plibri.co/3fs5NwQ

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®Super F AB 58% 2900F / 1590C SDS
    Plibrico®60 AB 58% 3100F / 1705C SDS
    Plibrico®80 AB 78% 3200F / 1760C SDS
    Plibrico®90 AB 90% 3400F / 1871C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®55 S 54% 3000F / 1648C SDS
    Plibrico®68 S 68% 3100F / 1705C SDS
    Plibrico®68 SA 68% 3100F / 1705C SDS
    Plibrico®85 S Special 83% 3300F / 1815C SDS
    Plibrico®90 S 90% 3400F / 1870C SDS
    Plibrico®SiC 80 (80% SiC) 2700F / 1480C SDS

    (fine grain – soft)

    Product Name %Al2O3 Service Limit SDS
    Plibrico®SR 68 68% 3100F / 1705C SDS
    Plibrico®SR 85 83% 3300F / 1815C SDS
    Plibrico®SR 90 88% 3400F / 1870C SDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®Super F AB 43% 2900F / 1595C SDS
    Plibrico HyRATE®60 AB 60% 3100F / 1705C SDS
    Plibrico HyRATE®80 AB 78% 3200F / 1760C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®68 S 68% 3100F / 1705C SDS
    Plibrico HyRATE®85 S Special 84% 3300F / 1815C SDS