Product: Redline Redbond 3000
Product #: 58002
Service Temperature Limit: 3000°F
Shelf Life: 9 months
Product Information: Redline™ Redbond 3000 is a wet, air setting, super duty refractory mortar. Coverage 350-400lb (160-180 kg) per 1000 standard firebrick. May be used for hot spot/fill injection with a suitable grout pump.
Product: PliGlue
Product #: 62100
Service Temperature Limit: 2800°F
Installation Method: Brushing or Spraying
Shelf Life: 12 months
Industries: Mineral Processing, Aluminum, Steel, Power Generation, Boilers, Incineration, Off-Gas, Foundry
Best Applications: Great in every thermal processing industry, designed for refractory repair applications, including:
Plibrico TDS Link – http://plibri.co/tds-pliglue
Product Information: PliGlue is a liquid phosphate binder that can be applied by spay or brush for various refractory applications. Functioning as a bonding enhancer, use this material to enhance the bond between new and repaired/worn refractories. Product advantages include:
Available Internationally As: Plico® PliGlue
Plibrico SDS Link – https://plibri.co/3iCyOnt
Product: PliFlow HyMOR SiC 70 KK
SiC Demon Mortar 85 Dry
Product #: 14805 (PliFlow)
17011 (Mortar)
Service Temperature Limit: 2900°F
Installation Method: Pouring, Pumping and Troweling
Shelf Life: 6 months
Industries: Waste-to-Energy, Boilers
Best Applications: These high silicon carbide products are recommended for applications that include:
Plibrico TDS Link – (PliFlow) https://plibri.co/pliflow-hymor-sic70kk
(Mortar) https://plibri.co/sic-demon-mortar85dry
Product Information: PliFlow™ HyMOR® SiC 70 KK is a 70% silicon carbide, self-flowing/self-leveling low cement castable. SiC Demon® Mortar 85 Dry is a dry, high silicon carbide content refractory mortar. Both products have high thermal conductivity to support efficient thermal transfer. Product advantages include:
Available Internationally As: Plico® Flow LC SiC 70 KK
SiC Demon® Mortar 85 Dry
Plibrico SDS Link – (PliFlow) https://plibri.co/2NoWm1C
(Mortar) https://plibri.co/3fOPxml
Product: NEW: Ultra Demon Air Set Wet Mortar
Product#: 17005
Service Temperature Limit: 3000°F
Installation Method: Troweling, Dipping
Shelf Life: 9 months
Industries: Aluminum, Power Generation, Off-Gas, Steel, Mineral Processing, Boilers, Incineration
Best Applications: Engineered for strength and extended workability. Typical applications include laying up intermediate, high duty and super duty fireclay brick:
Plibrico TDS Link – http://bit.ly/39ioEEg
Product Information: Ultra Demon Air Set Wet Mortar is an enhanced wet, air setting, super duty refractory mortar. Creamier in texture as compared to other mortars, the material has been engineered to be incredibly pliable giving it a more predictable consistency over time – only a 5% workability difference at 100 days. This versatile material is 2X stronger to better bond bricks together and can also be used for hot spot/fill injection with a suitable grout pump. Other product advantages include:
Available Internationally As: Ultra Demon Air Set Wet
Plibrico SDS Link – http://bit.ly/2SHQLag
Product: Plistix SR-90
Product #: 12020
Service Temperature Limit: 3300°F
Installation Method: Troweling, Brushing, Ramming
Shelf Life: 12 months
Industries: Aluminum, Mineral Processing, Steel, Power Generation, Boilers, Incineration, Off Gas, Thermal Oxidizers, Pulp & Paper
Best Applications: Ideal for repair applications in industrial processes that require a high strength servicing mix:
Plibrico TDS Link – https://plibri.co/3hU6dcA
Product Information: Plistix SR-90 is fine grain, high alumina, phosphate bonded “plaster” type of refractory service mix. Similar in chemistry and minerology other Plibrico high alumina phosphate bond plastic refractories (Plibrico 90 S, and Plibrico SR-90), Plistix SR-90 is manufactured in a thick mortar type consistency making it ideal for patching and service applications. It can be applied as is from the bucket for troweling, or thinned with water for a grout or wash coat. Product attributes include:
Available Internationally As: Plico® Stix SR-90
Plibrico SDS Link – https://plibri.co/3hXNbC9
Product: Plistix SR-68
Product #: 17704
Service Temperature Limit: 3100°F
Installation Method: Troweling, Brushing, Ramming
Shelf Life: 12 months
Industries: Mineral Processing, Power Generation, Aluminum/Non-Ferrous, Steel, Boilers, Incineration, Off-Gas
Best Applications: This material is best used for repairs in industrial processes that require a high strength service mix:
Plibrico TDS Link – http://bit.ly/2WFpLbK
Product Information: Plistix™️ SR-68 is a fine grain, mullite based, phosphate bond “plaster” type refractory service mix. Similar in chemistry and minerology to the other Plibrico Company mullite based phosphate bond plastic refractories (Plibrico 68, S, SA), Plistix SR-68 is manufactured with a thick mortar type consistency making it ideal for patching and service applications. It can be applied with a trowel as is from the bucket, or thinned with water for a grout or wash coat. Product attributes include:
Available Internationally As: Plico®️ Stix SR-68
Plibrico SDS Link – http://bit.ly/328DlFS
2500°F
Ramming or Vibration Casting
3 months
Power Generation, Boiler, Incineration, Petrochemical, Refining, Off Gas, Aluminum, Steel, Mineral Processing, Kiln, Pulp & Paper
Extreme environments where sever conditions require high abrasion resistance. Applications in various industrial processes including:
Plistix ABR is an ultra abrasion-resistant castable refractory. This castable utilizes a hybrid calcium aluminate/phosphate bond and is designed to yield high strength and abrasion resistance over a wide temperature range. The material can be installed by ramming, tamping or vibration casting. Bake out is per Plibrico Schedule C or C Linear. Plistix ABR product advantages include:
Product: Plistix 900 F
Product #: 17505
Service Temperature Limit: 3400°F
Installation Method: Brushing, Spraying, Injecting, Troweling, Tamping
Shelf Life: 12 months
Industries: Mineral Processing, Aluminum, Steel, Power Generation, Boilers, Incineration, Off-Gas, Foundry
Best Applications: Great in every industry as a repair and servicing material. Approximate mixing water additions for installation requirements:
Plibrico TDS Link – http://bit.ly/2HfeF6K
Product Information: Plistix™️ 900 F is a versatile high temperature service mix. Based on a corundum aggregate and matrix, with a phosphate bond, it has applications in furnaces, boilers and process vessels in virtually every industry. Supplied as a damp powder, it is mixed with water to various consistencies to be used as a coating, grout, putty and mortar. Use this material to service and repair cracks, spalls and worn refractories … it can also function as a bonding enhancer with plastic repairs. Product advantages include:
Available Internationally As: Plico®️ Stix 900 F
Plibrico SDS Link – http://bit.ly/2YWWTjE
| Product Name | %Al2O3 | Service Limit | SDS |
| Plibrico®Super F AB | 58% | 2900F / 1590C | SDS |
| Plibrico®60 AB | 58% | 3100F / 1705C | SDS |
| Plibrico®80 AB | 78% | 3200F / 1760C | SDS |
| Plibrico®90 AB | 90% | 3400F / 1871C | SDS |
| Product Name | %Al2O3 | Service Limit | SDS |
| Plibrico®55 S | 54% | 3000F / 1648C | SDS |
| Plibrico®68 S | 68% | 3100F / 1705C | SDS |
| Plibrico®68 SA | 68% | 3100F / 1705C | SDS |
| Plibrico®85 S Special | 83% | 3300F / 1815C | SDS |
| Plibrico®90 S | 90% | 3400F / 1870C | SDS |
| Plibrico®SiC 80 | (80% SiC) | 2700F / 1480C | SDS |
| Product Name | %Al2O3 | Service Limit | SDS |
| Plibrico®SR 68 | 68% | 3100F / 1705C | SDS |
| Plibrico®SR 85 | 83% | 3300F / 1815C | SDS |
| Plibrico®SR 90 | 88% | 3400F / 1870C | SDS |
| Product Name | %Al2O3 | Service Limit | SDS |
| Plibrico HyRATE®Super F AB | 43% | 2900F / 1595C | SDS |
| Plibrico HyRATE®60 AB | 60% | 3100F / 1705C | SDS |
| Plibrico HyRATE®80 AB | 78% | 3200F / 1760C | SDS |
| Product Name | %Al2O3 | Service Limit | SDS |
| Plibrico HyRATE®68 S | 68% | 3100F / 1705C | SDS |
| Plibrico HyRATE®85 S Special | 84% | 3300F / 1815C | SDS |