Pligun 90

Product: Pligun 90

Product #: 3334

Service Temperature Limit: 3300°F

Installation Method:  Gunning

Shelf Life:  9 months

Industries:  Oil/Gas, Off-Gas, Chemical-Ammonia, Steel, Ferrous, Refining, Pulp & Paper, Thermal Oxidizers

Best Applications:  Designed for very high temperature and/or reducing atmosphere applications in industrial processes, including:

  1. Thermal Oxidizer burner and reducing zones
  2. Ammonia Reformers
  3. Oil fired and waste heat boilers
  4. Carbon Black Reactors
  5. Sulfur recovery units

Plibrico TDS Link – https://plibri.co/3WCE9B7

Product Information: Pligun® 90 is a high alumina, high strength, conventional gun mix for service at elevated temperatures and demanding conditions.   It provides excellent chemical resistance as well as good abrasion resistance.   Pligun 90 has a low silica content making it suitable for high-temperature hydrogen atmospheres.   This gun mix utilizes a high purity corundum aggregate and matrix, bonded by high purity calcium aluminate cement.   It can be used in a variety of applications where a high purity refractory is required.   Further product advantages for Pligun 90 include:

  • Good physical properties for a conventional gun mix at elevated temperatures above 2000°F
  • Excellent resistance to reducing and hydrogen atmospheres
  • High Refractoriness
  • Good high temperature creep resistance
  • High thermal expansion coefficient
  • High thermal conductivity
  • Good gunability

Available Internationally As:  Plico® Gun Mix 90

Plibrico SDS Link – https://plibri.co/3SHVlE6

/by

Redline Red Hot G 45

Product: Redline Red Hot G 45

Product #: 52408

 

Service Temperature Limit:   2700oF

Installation Method:  Gunning

Shelf Life: 9 months

 

Industries: Power Generation, Off-Gas, Heat Treat, Foundry, Incineration, Boilers

Best Applications: This material is engineered for resurfacing existing refractory surfaces while still in a “hot” condition, these include:

  1. Soaking Pits
  2. Common Tunnels
  3. Dryers and calciners
  4. Heat Treat Furnaces
  5. Incinerators / Thermal Oxidizers

Plibrico TDS Link – https://plibri.co/4c5kOyV

Product Information:  Redline™ Red Hot G 45 is a 45% alumina, flint based low cement gun mix designed for resurfacing existing refractory surfaces.   It is generally applied in hot conditions, but can also be used cold.  Red Hot G 45 is typically used as a hot or cold service/repair material but can be used as a primary lining.  Product advantages include:

  • Excellent for hot gunning installations
  • Low rebound
  • Good adherence to old refractory
  • No special gunning installation requirements
  • Economical

 

Available Internationally As: Redline Red Hot G 45

Plibrico SDS Link – https://plibri.co/4b5NWVE

 

/by

Redline Redgun 45ES

Product: Redline Redgun 45ES

Product #: 52302

Service Temperature Limit:  2500°F

Shelf Life: 12 months

Product Information: Redline Redgun 45ES is a first quality gunning mix that exhibits excellent strengths combined with good resistance to abrasion and mechanical abuse.   It is a general purpose mix that has many applications.   Common applications include marine and stationary boilers, ashpits, and cement clinker coolers.

/by

Redline Red Hot G 60/5

Product: Redline Red Hot G 60/5

Product #: 52304

Service Temperature Limit:

Aluminum Contact –  1700°F

Non-Contact – 3100°F

Shelf Life: 9 months

Product Information: Redline™ Red Hot G 60/5 is a mullite based gun designed for resurfacing existing refractory surfaces.   It contains a silicon carbide addition to help resist corundum build up.   It is generally applied in hot conditions, but can also be used cold.   This material contains a non-wetting system and can be used above and below metal line in aluminum processing furnaces.

/by

Redline Redcast Durafloor

Product: Redline Redcast Durafloor

Product #: 50104

Service Temperature Limit:  1800°F

Shelf Life: 12 months

Product Information: Redline Redcast Durafloor is a coarse aggregate material which features high strengths and abrasion resistance at low temperatures.   It is engineered specifically for flooring applications which are subject to high degrees of thermal shock due to molten metal spillage, hot castings, or dross.   This unique castable differs from other conventional materials in that it performs extremely well in an unfired, or green condition.

/by

Redline Redcon 60

Product: Redline Redcon 60

Product #: 51101

Service Temperature Limit:  3100°F

Shelf Life: 9 months

Product Information: Redline Redcon 60 is a conventionally bonded, high alumina, high strength castable that has been engineered for service conditions at elevated temperatures.   Applications include: heat treating and forging furnaces, burner blocks, and most heating equipment.

/by

Redline Redcon 2800

Product: Redline Redcon 2800

Product #: 51102

Service Temperature Limit:  2800°F

Shelf Life: 12 months

Product Information: Redline Redcon 2800 is a super duty, conventionally bonded castable.   It was engineered for applications which require good strengths and abrasion resistance.   Some common applications include: upper walls and roofs of aluminum melting and holding furnaces, doors, and flues.   It is also well suited for many boiler applications.

/by

Redline Red Hot G 70/5

Product: Redline Red Hot G 70/5

Product #: 52305

Service Temperature Limit:

Aluminum Contact –  1700°F

Non-Contact – 3100°F

Shelf Life: 9 months

Product Information: Redline™ Red Hot G 70/5 is a mullite based gunning mix which can be applied either hot or cold.   It contains a silicon carbide addition to help resist corundum buildup.   This material develops an excellent bond with existing refractory surfaces and was designed to be applied over worn linings in aluminum processing furnaces.   It contains a non-wetting system and be applied both above and below the metal line.

/by

Redline Firebrand White

Product: Redline Firebrand White

Product #: 50103

Service Temperature Limit:  1800°F

Shelf Life: 12 months

Product Information: Redline™ Firebrand White is a medium aggregate, low duty fireclay castable which features good strengths at low temperatures.   This material is specially formulated for use in wood burning stoves, gas burning pizza ovens, and small crucible hobby furnaces.   It can be placed in situ or used in the manufacture of pre-cast shapes.

/by

Redline Firebrand

Product: Redline Firebrand

Product #: 50102

Service Temperature Limit:  1800°F

Shelf Life: 12 months

Product Information: Redline™ Firebrand is a medium aggregate, low duty fireclay castable which features good strengths at low temperatures.   This material is specially formulated for use in wood burning stoves and fireplaces.   It can be placed in situ or used in the manufacture of pre-cast shapes.

/by

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®Super F AB58%2900F / 1590CSDS
    Plibrico®60 AB58%3100F / 1705CSDS
    Plibrico®80 AB78%3200F / 1760CSDS
    Plibrico®90 AB90%3400F / 1871CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®55 S54%3000F / 1648CSDS
    Plibrico®68 S68%3100F / 1705CSDS
    Plibrico®68 SA68%3100F / 1705CSDS
    Plibrico®85 S Special83%3300F / 1815CSDS
    Plibrico®90 S90%3400F / 1870CSDS
    Plibrico®SiC 80(80% SiC)2700F / 1480CSDS

    (fine grain – soft)

    Product Name%Al2O3Service LimitSDS
    Plibrico®SR 6868%3100F / 1705CSDS
    Plibrico®SR 8583%3300F / 1815CSDS
    Plibrico®SR 9088%3400F / 1870CSDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®Super F AB43%2900F / 1595CSDS
    Plibrico HyRATE®60 AB60%3100F / 1705CSDS
    Plibrico HyRATE®80 AB78%3200F / 1760CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®68 S68%3100F / 1705CSDS
    Plibrico HyRATE®85 S Special84%3300F / 1815CSDS