Product: Plicast Super HyMOR 80 KK
Product #: 14606

Service Temperature Limit: 3100°F

Installation Method: Casting or Pumping
Shelf Life: 6 months

Industries: Mineral Processing, Steel, Incineration, Aluminum

Best Applications: Great for higher temperature applications in industrial processes including:

  1. Mineral Processing Kilns – alumina and aggregate calcining
  2. Steel/Ferrous – reheat/forge furnace hearths, jambs, ladles, lintels and sill
  3. Incinerators and Thermal Oxidizers – combustion and quench chambers
  4. Sulfur Recovery Units
  5. Aluminum – furnace upper walls and roofs
  6. Precast Shapes – including burner cones and piers – various industries

Plibrico TDS Linkhttp://bit.ly/2G97Hzs

Product Information: Plicast®️ Super HyMOR 80 KK is a bauxite based ultra-low cement castable. The lime content in this material is very low due to the significant reduction in the cement. The lower lime content enhances the properties and characteristics of this Super HyMOR material at higher temperature as compared to other HyMOR castables. Other advantages include:

  • Improved hot strength at elevated temperatures >2000oF
  • Excellent high temperature load deformation and creep resistance.
  • High alumina matrix for improved alkali attack and slag attack resistance
  • Excellent abrasion resistance: 8cc
  • Positive volume stability at elevated temperature
  • Plicast Super HyMOR 80 KK has good flow and setting characteristics allowing it to be place by vibration, casting or pumping.
  • Available Internationally As: Plico®️ Castable ULC 80 KK

Plibrico SDS Linkhttp://bit.ly/2NI26Eg

Product: Plicast Super HyMOR 65 KK

Product #: 14607

Service Temperature Limit:  3100°F

Installation Method:  Casting or Pumping

Shelf Life: 6 months

Industries: Mineral Processing, Steel, Incineration, Aluminum

Best Applications:  Great for higher temperature applications in industrial processes, applications include:

  1. Mineral Processing Kilns – alumina and aggregate calcining
  2. Steel/Ferrous – reheat/forge furnace hearths, jambs, ladles, lintels and sill
  3. Incinerators and Thermal Oxidizers – combustion and quench chambers
  4. Sulfur Recovery Units
  5. Aluminum – furnace upper walls and roofs
  6. Precast Shapes – including burner cones and piers – various industriesPlibrico TDS Link – https://plibri.co/3teP1aM

Product Information: Plicast® Super HyMOR® 65 KK is  is a mullite based ultra-low cement castable.   Lower lime content in the refractory matrix enhances characteristics at higher temperatures.   These characteristics include improved hot strength at elevated temperatures greater than 2000°F, creep resistance, and improved alkali and slag attack resistance.   Product advantages include:

  • Improved hot strength at elevated temperatures >2000°F
  • Excellent high temperature load deformation and creep resistance
  • High alumina matrix for improved alkali attack and slag attack resistance
  • Good abrasion resistance
  • Positive volume stability at elevated temperature

Plicast Super HyMOR 65 KK has good flow and setting characteristics allowing it to be place by vibration, casting or pumping.

Available Internationally As: Plico® Castable ULC 65 KK

Plibrico SDS Link – https://plibri.co/3tfilhg

Service Temperature Limit

3100°F

Installation Method

Casting

Shelf Life

6 months

Industries

Aluminum, Steel, Power Generation, Mineral Processing, Off Gas

Best Applications

High temperature applications in industrial processes including:

  1. Precast Shapes – including burner cones and piers – various industries
  2. Steel/Ferrous – reheat/forge furnace burner walls
  3. Incinerators and Thermal Oxidizers – combustion and quench chambers, choke rings
  4. Aluminum – regen fired furnace upper walls

Product Information

Plicast® AdMOR 6 KK is a 65% alumina ultra-low cement castable.   It is the andalusite aggregate system and matrix base that makes this material different and unique.   The refractory was specifically designed to optimize specific properties at elevated temperatures as compared mullite and bauxite based low and ultra-low cement castables.   Enhanced characteristics include:

  • Higher hot strengths above 2000°F
  • Relatively low modulus of elasticity as compared to its hot strength
  • Optimized high temperature >2000°F thermal cycling characteristics:
    • Higher % of strength, MOR & MOE retained after cycling
    • Excellent crack initiation and propagation resistance
  • Moderate thermal expansion
  • Superior hot loading resistance
    • Low TEUL (Thermal Expansion Under Load)
    • Very low Creep @ 2600°F
    • Excellent alkali vapor resistance

This castable differs from the very popular Plicast HyMOR® 3100 Special KK, Plicast HyMOR 70 KK, and Plicast Super HyMOR 65 KK due to its andalusite aggregate and matrix system.

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®Super F AB 58% 2900F / 1590C SDS
    Plibrico®60 AB 58% 3100F / 1705C SDS
    Plibrico®80 AB 78% 3200F / 1760C SDS
    Plibrico®90 AB 90% 3400F / 1871C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®55 S 54% 3000F / 1648C SDS
    Plibrico®68 S 68% 3100F / 1705C SDS
    Plibrico®68 SA 68% 3100F / 1705C SDS
    Plibrico®85 S Special 83% 3300F / 1815C SDS
    Plibrico®90 S 90% 3400F / 1870C SDS
    Plibrico®SiC 80 (80% SiC) 2700F / 1480C SDS

    (fine grain – soft)

    Product Name %Al2O3 Service Limit SDS
    Plibrico®SR 68 68% 3100F / 1705C SDS
    Plibrico®SR 85 83% 3300F / 1815C SDS
    Plibrico®SR 90 88% 3400F / 1870C SDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®Super F AB 43% 2900F / 1595C SDS
    Plibrico HyRATE®60 AB 60% 3100F / 1705C SDS
    Plibrico HyRATE®80 AB 78% 3200F / 1760C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®68 S 68% 3100F / 1705C SDS
    Plibrico HyRATE®85 S Special 84% 3300F / 1815C SDS