Product: Redline Redcast SC 60

Product #: 52104

Service Temperature Limit:

Aluminum Contact – 1700°F

Non-Contact – 2700°F

Shelf Life: 6 months

Product Information: Redline Redcast SC 60 is a low cement, high purity silicon carbide castable that provides excellent abrasion resistance, high thermal conductivity, and outstanding thermal shock resistance.   It will perform particularly well in areas subjected to high impact such as aluminum transfer troughs and tapout blocks in aluminum melting and holding furnaces.

Product: Redline Redcast SC 75

Product #: 52105

Service Temperature Limit:

Aluminum Contact – 1700°F

Non-Contact – 2700°F

Shelf Life: 6 months

Product Information: Redline Redcast SC 75 is a low cement, high purity silicon carbide castable that provides excellent abrasion resistance, high thermal conductivity, and outstanding thermal shock resistance.   It will perform particularly well in areas subjected to high impact such as aluminum transfer troughs and tapout blocks in aluminum melting and holding furnaces.

Product: Redline Redflow 60

Product #: 52110

Service Temperature Limit:  3100°F

Shelf Life: 6 months

Product Information: Redline Redflow 60 is a high strength, super duty, low moisture castable engineered to have good handling and flow characteristics.   It can be pumped and will meet most severe service conditions.   Applications include: aluminum furnace roofs and upper sidewalls, forge and heat treating furnaces, kiln car tops, rotary kiln linings, and dryer furnaces.

Product: Redline Redcast 50

Product #: 52108

Service Temperature Limit:  3000°F

Shelf Life: 6 months

Product Information: Redline Redcast 50 is a high strength, first quality castable engineered for moderate to severe conditions.   Applications include: forge and heat treating furnaces, homogenizing furnace pads, small aluminum furnace roofs and upper sidewalls, kiln cartops.

Product: Redline Redflow 50

Product #: 52106

Service Temperature Limit:  3000°F

Shelf Life: 6 months

Product Information: Redline Redflow 50 is a high strength, super duty, low moisture castable engineered to have good handling and flow characteristics.   It will meet most severe service conditions.   Applications include: aluminum furnace roofs and upper sidewalls, forge and heat treating furnaces, kiln car tops, rotary kiln linings, and dryer furnaces.

Product: Redline Redcast 45

Product #: 52101

Service Temperature Limit:  2800°F

Shelf Life: 6 months

Product Information: Redline Redcast 45 is a high strength, first quality, low cement castable engineered for moderate to severe service conditions.   Applications include: forge and heat treating furnaces, homogenizing furnace pads, small aluminum furnace roofs and upper sidewalls, kiln car tops.

Product: Redline Redcast SC

Product #: 52103

Service Temperature Limit:

Aluminum Contact –  1700°F

Non-Contact – 3000°F

Shelf Life: 6 months

Product Information: Redline™ Redcast SC is a high purity, mullite based low cement castable that contains a silicon carbide addition for increased abrasion and thermal shock resistance.   It is designed for areas that are subjected to high degrees of impact and thermal shock from molten aluminum.   This material can also be utilized in molten copper transfer troughs.

Product: Redline Redcast 60-19

Product #: 52102

Service Temperature Limit:

Aluminum Contact –  1700°F

Non-Contact – 3000°F

Shelf Life: 6 months

Product Information: Redline™ Redcast 60-19 is a mullite based low cement castable that contains a silicon carbide addition for increased abrasion and thermal shock resistance. It is designed for areas that are subjected to high degrees of impact and thermal shock from molten aluminum. This material can also be utilized in molten copper transfer troughs.

Product: Plicast HyMOR 93V KK

Product #: 14212

Service Temperature Limit:  3000°F

Installation Method:  Vibration Casting

Shelf Life: 6 months

Industries: Steel, Off-Gas, Pulp & Paper, Petrochemical, Thermal Oxidizer

Best Applications:  Engineered for applications in industrial processes including.   Typical applications include:

  1. Precast Shapes – including burner cones, piers, and impact pads– various industries
  2. Steel and Foundry – various applications including ladle impact pads
  3. Thermal Oxidizers – inlets and burner cones, combustion chambers, choke rings
  4. Sulfur Recovery Units
  5. Chemical and petrochemical vessels – including ammonia reformers

Plibrico TDS Link – https://plibri.co/3sgHtDQ

Product Information: Plicast® HyMOR®️ 93V KK is a high alumina, low cement castable.   Developed with high purity alumina aggregate, and containing essentially no silica or iron oxides, this castable ends up as one of the strongest in the line of refractories.   The key to this materials strength is the low cement technology admixtures that are combined with vibration casting installation methods.   This partnership allows for a water reduction that yields higher densities, lower porosity, and better physical attributes.   Product advantages include:

  • Very low abrasion loss < 4cc
  • High density > 182 pcf
  • Low porosity < 16%
  • Very high hot strength at elevated temperatures 2500+psi @2000°F
  • High crushing strength
  • Improved slag corrosion resistance

Available Internationally As: Plico Castable LC 93V KK

Plibrico SDS Link – https://plibri.co/3sibQdm

Product: Plicast HyMOR 85 BF C KK

Product #: 3264

 Service Temperature Limit: 3100°F

 Installation Method:  Casting

Shelf Life:  6 months

 Industries:  Aluminum, Steel, Incineration

Best Applications:  This high alumina castable and its aluminum resistant version (Plicast Al-Tuff 85 BF C) are recommended for applications that include:

  1. Precast Shapes
  2. Delta Sections
  3. Ladle Bottom Surrounds and Ladle Lip Rings
  4. Jambs and Sills in an aluminum furnace
  5. Aluminum troughs, high wear areas

 Plibrico TDS Link – https://plibri.co/plicast-hymor85bfckk

Product Information: Plicast® HyMOR® 85 BF C KK is a brown fused, high alumina based low cement castable.   This coarse grain material is engineered to provide excellent resistance to thermal cycling, impact and fracture.   Made with 85% brown fused alumina, this castable and its Al-Tuff non-wetting to aluminum version (Plicast Al-Tuff 85 BF C), also offers excellent abrasion resistance and superior strength.   Plicast HyMOR 85 BF C KK combination of strength, toughness, alumina content, and other compositional features make it an excellent product for many applications.   Product advantages include:

  • Excellent abrasion resistance < 5 cc
  • Excellent CCS and hot strength
  • High service limit 3100°F
  • High density and low shrinkage
  • Great casting properties

Available Internationally As:  Plico® Castable LC 85 BF C KK

 Plibrico SDS Link – https://plibri.co/30AzRP4

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®Super F AB 58% 2900F / 1590C SDS
    Plibrico®60 AB 58% 3100F / 1705C SDS
    Plibrico®80 AB 78% 3200F / 1760C SDS
    Plibrico®90 AB 90% 3400F / 1871C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®55 S 54% 3000F / 1648C SDS
    Plibrico®68 S 68% 3100F / 1705C SDS
    Plibrico®68 SA 68% 3100F / 1705C SDS
    Plibrico®85 S Special 83% 3300F / 1815C SDS
    Plibrico®90 S 90% 3400F / 1870C SDS
    Plibrico®SiC 80 (80% SiC) 2700F / 1480C SDS

    (fine grain – soft)

    Product Name %Al2O3 Service Limit SDS
    Plibrico®SR 68 68% 3100F / 1705C SDS
    Plibrico®SR 85 83% 3300F / 1815C SDS
    Plibrico®SR 90 88% 3400F / 1870C SDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®Super F AB 43% 2900F / 1595C SDS
    Plibrico HyRATE®60 AB 60% 3100F / 1705C SDS
    Plibrico HyRATE®80 AB 78% 3200F / 1760C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®68 S 68% 3100F / 1705C SDS
    Plibrico HyRATE®85 S Special 84% 3300F / 1815C SDS