Product: Plicast Al-Tuff Floor Guard HT

Product #: 3247

Service Temperature Limit: 2500°F

Installation Method:  Casting or Pumping

Shelf Life:  12 months

Industries:  Aluminum

Best Applications:  Perfect for high temperature flooring and splash pad applications around furnaces and casting pits in the aluminum industry.  Can also be used for:

  1. Homogenizing furnace hearths
  2. Annealing furnaces bases
  3. Heat treat furnace car bottoms

Plibrico TDS Link – https://plibri.co/3p0vRS4  

Product Information: Plicast® Al-Tuff® Floor Guard HT is a castable designed specifically for hot flooring and splash pads in the aluminum industry.   Incorporating an additive system to help eliminate aluminum adherence, Plicast Al-Tuff Floor Guard HT maintains consistent properties from low temperature to above 1700°F.   This material has been engineered to develop strength rapidly with only a minimum cure period.   The rapid development allows the material to be used in as little as 16 hours.   However, for maximum hydraulic strength, a full cure is required.   Product advantages include:

  • High crushing strength: cured to 1500+°F
  • Consistent abrasion resistance <15cc  (cured to 1500+°F)
  • Thermal spall resistant
  • Versatile placement, may be installed by casting or pumping

Available Internationally As:  Plico® Castable A-T Floor Guard HT

Plibrico SDS Link – https://plibri.co/364Jiri

Product #: 14279

Service Temperature Limit:
Aluminum Contact: 1700°F
Non-Contact: 2500°F

Installation Method: Pumping
Shelf Life: 12 months

Industries: Aluminum

Best Applications: Field cast and precast shape applications for aluminum melting and processing applications including:

  1. Sub hearths
  2. Splash pads
  3. Homogenizing furnace hearths

Product Information: Plicast® Al-Tuff® 27 CP KK is the pumping version of Plicast Al-Tuff 27 C KK, Plibrico’s workhorse castable for aluminum sub hearth application. This product was developed to allow for an easier, quicker, pump cast installation. Mirroring the great properties of our standard workhorse, the pump castable offers the same:

  • Coarse grain sizing
  • Crushing strength
  • Toughness – impact and crack resistance
  • Aluminum penetration resistance

Available Internationally As: Plico® Castable A-T 27 CP KK

Product: Plicast Al-Tuff 36

Product #: 16509

Service Temperature Limit:

Aluminum Contact –  1700°F

Non-Contact – 3100°F

Installation Method:  Casting

Shelf Life: 9 months

Industries: Aluminum

Best Applications:  Engineered for field cast and precast shape applications for aluminum melting and processing, applications include:

  1. Sub hearths
  2. Splash pads
  3. Homogenizing furnace hearths

Plibrico TDS Link – https://plibri.co/3DL6f32

Product Information: Plicast®️ Al-Tuff® 36 is a high temperature, mullite based nonwetting castable, formulated with 60% alumina.   Plicast Al-Tuff 36 delivers material toughness for impact and crack resistance, along with very good nonwetting resistance to aluminum penetration to prevent leaks and run outs.   With a high temperature service limit, this high strength material offers very good volume stability.   Product advantages include:

  • Very good volume stability
  • Good thermal conductivity for a mullite based product
  • Easy to install
  • Toughness – impact and crack resistance
  • Aluminum penetration resistance

Available Internationally As: Plico® Castable A-T 36

Plibrico SDS Link – https://plibri.co/3r5wY5s

Product: Plicast Al-Tuff 27 C

Product #: 16510

Service Temperature Limit:

Aluminum Contact: 1700°F

Non-Contact: 2500°F

Installation Method:  Casting

Shelf Life:  12 months

Industries:  Aluminum

Best Applications:  Engineered for field cast and precast shape applications for aluminum melting and processing applications including:

  1. Sub hearths
  2. Splash pads
  3. Homogenizing furnace hearths

Plibrico TDS Link – https://plibri.co/2VqCI9y

Product Information: Plicast® Al-Tuff® 27 C is Plibrico’s workhorse castable for aluminum sub hearth applications.   This castable offers coarse grain sizing, good cold crushing and hot MOR strength.   Plicast Al-Tuff 27 C delivers material toughness for impact and crack resistance, along with very good non wetting resistance to aluminum penetration to prevent leaks and run outs.   This castable is designed for use with a wide water range.

  • Coarse grain sizing
  • Good crushing strength
  • Toughness – impact and crack resistance
  • Aluminum penetration resistance

Available Internationally As:  Plico® Castable A-T 27 C

Plibrico SDS Link – https://plibri.co/2HYc7O5

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®Super F AB 58% 2900F / 1590C SDS
    Plibrico®60 AB 58% 3100F / 1705C SDS
    Plibrico®80 AB 78% 3200F / 1760C SDS
    Plibrico®90 AB 90% 3400F / 1871C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®55 S 54% 3000F / 1648C SDS
    Plibrico®68 S 68% 3100F / 1705C SDS
    Plibrico®68 SA 68% 3100F / 1705C SDS
    Plibrico®85 S Special 83% 3300F / 1815C SDS
    Plibrico®90 S 90% 3400F / 1870C SDS
    Plibrico®SiC 80 (80% SiC) 2700F / 1480C SDS

    (fine grain – soft)

    Product Name %Al2O3 Service Limit SDS
    Plibrico®SR 68 68% 3100F / 1705C SDS
    Plibrico®SR 85 83% 3300F / 1815C SDS
    Plibrico®SR 90 88% 3400F / 1870C SDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®Super F AB 43% 2900F / 1595C SDS
    Plibrico HyRATE®60 AB 60% 3100F / 1705C SDS
    Plibrico HyRATE®80 AB 78% 3200F / 1760C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®68 S 68% 3100F / 1705C SDS
    Plibrico HyRATE®85 S Special 84% 3300F / 1815C SDS