Product: Pligun Tuff Mix
Product #: 14033
Service Temperature Limit: 2500°F
Installation Method: Gunning
Shelf Life: 12 months
Industries: Mineral Processing, Aluminum, Steel, Power Generation, Boilers, Incineration, Off-Gas, Foundry, Ethanol
Best Applications: Typical thermal applications include:
- Wet Bottom Ash Hoppers
- Incinerators
- Boilers
- Dryers and Calciners
- Stacks
Plibrico TDS Link – http://bit.ly/31pnFOB
Product Information: Pligun®️ Tuff Mix is a Plibrico Company “go to” gunning mix for general refractory use up to 2500°F. Possessing moderate density, good strength, as well as excellent gunning characteristics, it has applications across many of the major thermal industries. This “Tuff” material, when gunned properly, produces rugged refractory linings with good volume stability. Product advantages include:
- Good strength to density ratio for economical use
- Moderate thermal expansion
- Moderate thermal conductivity
- Low rebound and gunning water range
- No special gunning installation requirements
Available Internationally As: Plico®️ Gun Mix Tuff Mix
Plibrico SDS Link – http://bit.ly/2Kjx6JL
Product: Pligun Super Tuff Mix
Product #: 14150
Service Temperature Limit: 2600°F
Installation Method: Gunning
Shelf Life: 12 months
Industries: Power Generation, Incineration, Off-Gas, Boilers, Steel, Aluminum/Non-Ferrous
Best Applications: This material works wonderful in applications such as:
- Atmosphere heat treat furnaces
- Wet Bottom ash hoppers
- Incinerators and thermal oxidizers
- Boilers
- Dryers and calciners
- Stacks
Plibrico TDS Link – http://bit.ly/2QwVf2O
Product Information: Pligun™️ Super Tuff Mix is a lower iron content version of Pligun™️ Tuff Mix. While possessing most the attributes, the low iron content of the bonding matrix increases the service limit of Pligun Super Tuff Mix to 2600°F, and also makes it suitable for use in moderate reducing atmosphere environments. This general use gunning mix has moderate density, good strength as well as excellent gunning characteristics. Product advantages include:
- Good strength to density ratio
- Moderate thermal expansion
- Moderate thermal conductivity
- Low iron content for reducing atmospheres
- Low rebound and gunning water range
- No special gunning installation requirements
Available Internationally As: Plico®️ Gun Mix Super Tuff Mix
Plibrico SDS Link – http://bit.ly/2On59Bw
Service Temperature Limit
2700°F
Installation Method
Gunning
Shelf Life
9 months
Industries
Waste-to-Energy, Incineration, Boilers
Best Applications
Operations that require high refractory thermal conductivity, including:
- Initial Installation
- Water wall studded tube protection in waste incinerators
- Water wall studded tube protection in boilers
- Gunning Maintenance
- Water wall studded tube protection in waste incinerators
- Water wall studded tube protection in boilers
- Any other application requiring a high conductivity refractory
Product Information
Pligun® SiC HP8 is an 80% silicon carbide, high performance gun mix. This product was developed to meet the demanding specifications for waste incineration boiler tube sheet refractory. Independently evaluated against other competitive materials, Pligun SiC HP8 achieved and excelled in many areas including:
- High mechanical strength – both hot and cold
- High thermal conductivity
- Relatively low abrasion loss
- Resistance to acid slag corrosion
- Good gunability and low rebound
Service Temperature Limit
2700oF
Installation Method
Gunning, Hand Packing, Troweling
Shelf Life
9 months
Industries
Power Generation, Waste to Energy, Incineration, Boilers
Best Applications
Initial installation and gunning maintenance for:
- Water wall studded tube protection in waste incinerators and boilers
- Applications requiring a high conductivity refractory
Product Information
Pligun SiC 80 TM is an 80% silicon carbide gun mix. This versatile product exhibits good gunning characteristics and is also designed for micro applications. You can apply via hand packing or troweling for small applications and tight areas like behind boiler tubes and studs. Pligun SiC 80 TM product advantages include:
- Good mechanical strength
- High thermal conductivity
- Resistance to acid slag corrosion
Product: Pligun 70 KK
Product #: 13023
Service Temperature Limit: 3100°F
Installation Method: Gunning
Shelf Life: 6 months
Industries: Steel, Aluminum, Boilers, Incineration
Best Applications: Super for both repair and resurfacing of worn refractory as well as for new installations. Typical applications include:
- Reheat, forging, and heat treat furnaces – walls and roofs
- Aluminum furnaces (non-metal contact areas)
- Incinerators and thermal oxidizers
- Boilers and heaters
- Dryers and calciners
- Stacks and ducts
Plibrico TDS Link – https://plibri.co/2Tg8Mwo
Product Information: Pligun® 70 KK is a 70% alumina conventional gunning mix for use in applications up to 3100°F. The gunning material has a high mullite content, possesses excellent gunning characteristics, and requires no special gunning procedures. Product advantages include:
- Good strength: hot and cold
- Moderate density
- Reheat volume stability
- Moderate thermal expansion and conductivity
- Good adherence to worn refractory
- Low rebound and gunning water range
- No special gunning installation requirements
- Available Internationally As: Plico® Gun Mix 70 KK
Plibrico SDS Link – https://plibri.co/3cUiVGZ
Product: Pligun 48
Product #: 13003
Service Temperature Limit: 2900°F
Installation Method: Gunning
Shelf Life: 12 months
Industries: Power Generation, Off-Gas, Heat Treat, Foundry, Incineration, Boilers
Best Applications: This material is versatile and has applications in many different industries including:
- Soaking pits
- Heat treat furnaces
- Incinerators / thermal oxidizers
- Boilers
- Dryers and calciners
- Stacks
Plibrico TDS Link – https://plibri.co/2Bf2GGT
Product Information: Pligun® 48 is a super duty gun mix suitable for use at temperatures up to 2900°F. It possesses moderate density, adequate strength, and good characteristics. Pligun 48 is typically used as a hot or cold servicing/repair material but can be used as a primary lining. Product advantages include:
- Moderate density
- Moderate thermal expansion
- Moderate thermal conductivity
- Low rebound and wide gunning water range
- Good adherence to old refractory
- No special gunning installation requirements
- Economical
Available Internationally As: Plico® Gun Mix 48
Plibrico SDS Link – https://plibri.co/2Vxe8EA
Service Temperature Limit: 3300°F
Installation Method: Gunning
Shelf Life: 9 months
Industries: Oil/Gas, Off-Gas, Chemical-Ammonia, Steel, Ferrous, Refining, Pulp & Paper, Thermal Oxidizers
Best Applications: Designed for very high temperature and/or reducing atmosphere applications in industrial processes, including:
- Thermal Oxidizer burner and reducing zones
- Ammonia Reformers
- Oil fired and waste heat boilers
- Carbon Black Reactors
- Sulfur recovery units
Plibrico TDS Link – https://plibri.co/3wPcnUi
Product Information: Pligun® 40 is a high alumina, high strength, conventional gun mix for service at elevated temperatures and demanding conditions. It provides excellent chemical resistance as well as good abrasion resistance. Pligun 40 has a low silica content making it suitable for high-temperature hydrogen atmospheres. This gun mix utilizes a high purity corundum aggregate and matrix, bonded by high purity calcium aluminate cement. It can be used in a variety of applications where a high purity refractory is required. Further product advantages for Pligun 40 include:
- Good physical properties for a conventional gun mix at elevated temperatures above 2000°F
- Excellent resistance to reducing and H2 atmospheres
- High Refractoriness
- Good high temperature creep resistance
- High thermal expansion coefficient
- High thermal conductivity
- Good gunability
Available Internationally As: Plico® Gun Mix 40
Plibrico SDS Link – https://plibri.co/3wMNKHM
Product: Pligun 3100 Special
Product #: 14031
Service Temperature Limit: 3100°F
Installation Method: Gunning
Shelf Life: 9 months
Industries: Power Generation, Mineral Processing, Steel, Aluminum/Non-Ferrous, Boilers, Incineration, Off-Gas
Best Applications: This material is great for new installations, as well as repair and resurfacing worn refractory. Typical applications include :
- Reheat, forging, and heat treat furnaces
- Aluminum furnaces – Non metal contact
- Incinerators and thermal oxidizers
- Boilers
- Dryers and calciners
- Stacks and ducts
Plibrico TDS Link – http://bit.ly/2X1DmdO
Product Information: Pligun™️ 3100 Special is a “go to” gun mix for general use in applications up to 3100°F. Pligun 3100 Special is a mullite based, low cement product with good density and strength as well as possessing excellent gunning characteristics. It may be heated up in as little as 16 hrs and does not require a stringent low cement type bake out schedule. Product advantages include:
- Good strength and density
- Moderate thermal expansion
- Moderate thermal conductivity
- Good adherence to worn refractory
- Low rebound and gunning water range
- No special gunning installation requirements
Available Internationally As: Plico®️ Gun Mix 3100 Special
Plibrico SDS Link – http://bit.ly/32CcPEX