Product: Pligun LWI 24R

Product #: 3260

Service Temperature Limit: 2450°F

Installation Method:  Gunning

Shelf Life:  12 months

Industries:  Petrochemical, Thermal Oxidizers, Power Generation, Steel, Incinerators, Ethanol

Best Applications:  Engineered for intermediate temperature insulating components requiring a low-iron content refractory.   Typical applications include:

  1. Petrochemical heater walls and roofs
  2. Regenerator linings in FCCU processes
  3. Incinerators
  4. Thermal Oxidizers
  5. CO Furnaces

Plibrico TDS Link – https://plibri.co/3p4iNK5

Product Information: Pligun® LWI 24R is an intermediate temperature low-iron insulating gun mix formulated with high purity calcium aluminate cement.   This product has a good balance of strength, density, and service limit.   Great for a back-up or hot face lining in reducing atmosphere industrial applications.   Product advantages include:

  • Good CCS and hot strength for a light-weight insulator
  • Medium density: 85 pcf
  • 2450°F service limit
  • Moderate thermal conductivity
  • Low iron content
  • Good gunability

Available Internationally As:  Plico® Gun Mix LW 24 R

Plibrico SDS Link – https://plibri.co/3cVhfjg

Product: Pligun LWI 26
Product #: 16013

Service Temperature Limit: 2600°F

Installation Method: Gunning
Shelf Life: 9 months

Industries: Aluminum, Steel, Foundry, Power Generation, Mineral Processing, Boilers, Incineration, Off-Gas, Sugar, Ethanol, Pulp & Paper

Best Applications: Thermal operations that require a higher temperature insulating or a reducing atmosphere resistant component. Typical applications include:

  1. FCC units – regenerators and plenums (one shot lining)
  2. Fired heaters – radiant sections and roofs
  3. Incinerators and thermal oxidizers
  4. Sulfur recovery units – back up insulation

Plibrico TDS Linkhttp://bit.ly/2KaH66P

Product Information: Pligun®️ LWI®️ 26 is a higher temperature insulating gun mix. With a service limit of 2600°F, and good strength, this material is suitable as either a backup insulating component or as a “one shot” hot face lining. In addition, the low iron content in Pligun LWI 26 makes it ideal for use in reducing combustion applications. Other product advantages include:

  • Low iron content – <1%
  • Medium density – ~85 pcf
  • Good CCS and hot strength
  • Nice volume stability, positive linear change at the service limit
  • Good gunability

Available Internationally As: Plico®️ Gun Mix LW 26

Plibrico SDS Linkhttp://bit.ly/2K0EGZq

Product: Pligun LWI 24
Product #: 16014

Service Temperature Limit: 2450°F

Installation Method: Gunning
Shelf Life: 12 months

Industries: Power Generation, Aluminum, Steel, Mineral Processing, Off-Gas, Pulp & Paper, Boilers, Incineration

Best Applications: Engineered for intermediate temperature insulating components. Typical applications include:

  1. Backup linings/ insulation:
  2. Boilers
  3. Incinerators
  4. Heat treat and reheat furnaces
  5. Fired heaters: convection section
  6. Stacks & breechings

Plibrico TDS Linkhttp://bit.ly/378MmkM

Product Information: Pligun®️ LWI®️ 24 is an intermediate temperature insulating gun mix. A terrific combination of good strength, moderate density, and service limit, make this gun mix suitable as either a backup insulating component or a hot face lining in non-erosive environments. Product advantages include:

  • Good CCS and hot strength
  • Medium density: ~85 pcf
  • 2450°F serviced limit
  • Moderate thermal conductivity
  • Good volume stability
  • Moderate acid resistance
  • Good gunability

Available Internationally As: Plico®️ Gun Mix LC 24

Plibrico SDS Linkhttp://bit.ly/2SzPP6z

Product: Pligun LWI 106
Product #: 13018

Service Temperature Limit: 2000°F

Installation Method: Gunning or Casting
Shelf Life: 12 months

Industries: Mineral Processing, Aluminum, Steel, Power Generation, Boilers, Refining, Incineration, Off-Gas, Pulp & Paper

Best Applications: Uses that require a highly insulating backup component or hot face liner. Typical applications include:

  1. Boilers
  2. Steam flood generators
  3. Fired heaters
  4. Incinerators and thermal oxidizers – back up insulation
  5. Aluminum furnaces – upper wall back up insulation
  6. Reheat furnaces – back up insulation
  7. Homogenizing furnaces

Plibrico TDS Linkhttp://bit.ly/2kPfXNR

Product Information: Pligun®️ LWI 106 is a low density insulating gun mix that can be gunned or cast. Developed primarily as a backup insulating component, with a service limit of 2000°F and acceptable strength, it can also be used as a hot face lining in low temperature applications such as heater and homogenizing furnaces. Product advantages include:

  • Low density – 35 pcf gunned or cast
  • Adequate CCS and hot strength
  • Low thermal conductivity
  • Good gunability and performance
  • Can be cast (80 – 90% water)

Available Internationally As: Plico®️ Gun Mix LW 106

Plibrico SDS Linkhttp://bit.ly/2lTC6uR

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®Super F AB 58% 2900F / 1590C SDS
    Plibrico®60 AB 58% 3100F / 1705C SDS
    Plibrico®80 AB 78% 3200F / 1760C SDS
    Plibrico®90 AB 90% 3400F / 1871C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®55 S 54% 3000F / 1648C SDS
    Plibrico®68 S 68% 3100F / 1705C SDS
    Plibrico®68 SA 68% 3100F / 1705C SDS
    Plibrico®85 S Special 83% 3300F / 1815C SDS
    Plibrico®90 S 90% 3400F / 1870C SDS
    Plibrico®SiC 80 (80% SiC) 2700F / 1480C SDS

    (fine grain – soft)

    Product Name %Al2O3 Service Limit SDS
    Plibrico®SR 68 68% 3100F / 1705C SDS
    Plibrico®SR 85 83% 3300F / 1815C SDS
    Plibrico®SR 90 88% 3400F / 1870C SDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®Super F AB 43% 2900F / 1595C SDS
    Plibrico HyRATE®60 AB 60% 3100F / 1705C SDS
    Plibrico HyRATE®80 AB 78% 3200F / 1760C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®68 S 68% 3100F / 1705C SDS
    Plibrico HyRATE®85 S Special 84% 3300F / 1815C SDS