Product: Redline Redlite 110G

Product #: 55302

Service Temperature Limit:  2600°F

Shelf Life: 6 months

Product Information: Redline™ Redlite 110G is a high temperature semi-insulating gunite which has excellent properties.   It contains a non-wetting additive for molten aluminum contact applications.   It is designed for applications that exceed the requirements of standard insulating materials, but still require light weight and good insulating properties.

Product: Redline Redlite 20G

Product #: 55301

Service Temperature Limit:  2000°F

Shelf Life: 12 months

Product Information: Redline™ Redlite 20G is a lightweight insulating gun mix that is engineered for service at low to moderate temperatures.   Generally used as backup insulation, it can also be used for stacks and door linings in low temperature applications.

Product: Redline Redlite 24G

Product #: 55303

Service Temperature Limit:  2400°F

Shelf Life: 12 months

Product Information: Redline™ Redlite 24G is a high temperature insulating gun mix.   It can be used in a variety of applications including heat treating furnaces, thermal oxidizers, and flue stacks.

Product: Pligun LWI 24R

Product #: 3260

Service Temperature Limit: 2450°F

Installation Method:  Gunning

Shelf Life:  12 months

Industries:  Petrochemical, Thermal Oxidizers, Power Generation, Steel, Incinerators, Ethanol

Best Applications:  Engineered for intermediate temperature insulating components requiring a low-iron content refractory.   Typical applications include:

  1. Petrochemical heater walls and roofs
  2. Regenerator linings in FCCU processes
  3. Incinerators
  4. Thermal Oxidizers
  5. CO Furnaces

Plibrico TDS Link – https://plibri.co/3p4iNK5

Product Information: Pligun® LWI 24R is an intermediate temperature low-iron insulating gun mix formulated with high purity calcium aluminate cement.   This product has a good balance of strength, density, and service limit.   Great for a back-up or hot face lining in reducing atmosphere industrial applications.   Product advantages include:

  • Good CCS and hot strength for a light-weight insulator
  • Medium density: 85 pcf
  • 2450°F service limit
  • Moderate thermal conductivity
  • Low iron content
  • Good gunability

Available Internationally As:  Plico® Gun Mix LW 24 R

Plibrico SDS Link – https://plibri.co/3cVhfjg

Product: Pligun MW 110

Product #: 3256

Service Temperature Limit:  2400°F

Installation Method:  Gunning

Shelf Life:  12 months

Industries:  Petrochemical

Best Applications:  Great for areas requiring a good combination of insulating properties, abrasion resistance and strength, specific applications include:

  1. Reactors
  2. Regenerator
  3. Risers and Transfer lines
  4. FCCU

Plibrico TDS Link – https://plibri.co/3wfYgGP

Product Information: Pligun® MW 110 is a middle-weight gunning grade refractory that has been formulated to have high strength and abrasion resistance with relatively low thermal conductivity.   Pligun MW 110 is the go-to gun mix of choice when high performance and thermal insulating properties are needed in a single product.   Product advantages include:

  • Good thermal insulation properties for a medium weight insulator
  • High strength
  • High abrasion resistance
  • Good gunability with low rebound

Available Internationally As:  Plico Gun Mix MW110

Plibrico SDS Link – https://plibri.co/3iyivLJ

Product: Pligun LWI 26
Product #: 16013

Service Temperature Limit: 2600°F

Installation Method: Gunning
Shelf Life: 9 months

Industries: Aluminum, Steel, Foundry, Power Generation, Mineral Processing, Boilers, Incineration, Off-Gas, Sugar, Ethanol, Pulp & Paper

Best Applications: Thermal operations that require a higher temperature insulating or a reducing atmosphere resistant component. Typical applications include:

  1. FCC units – regenerators and plenums (one shot lining)
  2. Fired heaters – radiant sections and roofs
  3. Incinerators and thermal oxidizers
  4. Sulfur recovery units – back up insulation

Plibrico TDS Linkhttp://bit.ly/2KaH66P

Product Information: Pligun®️ LWI®️ 26 is a higher temperature insulating gun mix. With a service limit of 2600°F, and good strength, this material is suitable as either a backup insulating component or as a “one shot” hot face lining. In addition, the low iron content in Pligun LWI 26 makes it ideal for use in reducing combustion applications. Other product advantages include:

  • Low iron content – <1%
  • Medium density – ~85 pcf
  • Good CCS and hot strength
  • Nice volume stability, positive linear change at the service limit
  • Good gunability

Available Internationally As: Plico®️ Gun Mix LW 26

Plibrico SDS Linkhttp://bit.ly/2K0EGZq

Product: Pligun LWI 24
Product #: 16014

Service Temperature Limit: 2450°F

Installation Method: Gunning
Shelf Life: 12 months

Industries: Power Generation, Aluminum, Steel, Mineral Processing, Off-Gas, Pulp & Paper, Boilers, Incineration

Best Applications: Engineered for intermediate temperature insulating components. Typical applications include:

  1. Backup linings/ insulation:
  2. Boilers
  3. Incinerators
  4. Heat treat and reheat furnaces
  5. Fired heaters: convection section
  6. Stacks & breechings

Plibrico TDS Linkhttp://bit.ly/378MmkM

Product Information: Pligun®️ LWI®️ 24 is an intermediate temperature insulating gun mix. A terrific combination of good strength, moderate density, and service limit, make this gun mix suitable as either a backup insulating component or a hot face lining in non-erosive environments. Product advantages include:

  • Good CCS and hot strength
  • Medium density: ~85 pcf
  • 2450°F serviced limit
  • Moderate thermal conductivity
  • Good volume stability
  • Moderate acid resistance
  • Good gunability

Available Internationally As: Plico®️ Gun Mix LC 24

Plibrico SDS Linkhttp://bit.ly/2SzPP6z

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®Super F AB 58% 2900F / 1590C SDS
    Plibrico®60 AB 58% 3100F / 1705C SDS
    Plibrico®80 AB 78% 3200F / 1760C SDS
    Plibrico®90 AB 90% 3400F / 1871C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®55 S 54% 3000F / 1648C SDS
    Plibrico®68 S 68% 3100F / 1705C SDS
    Plibrico®68 SA 68% 3100F / 1705C SDS
    Plibrico®85 S Special 83% 3300F / 1815C SDS
    Plibrico®90 S 90% 3400F / 1870C SDS
    Plibrico®SiC 80 (80% SiC) 2700F / 1480C SDS

    (fine grain – soft)

    Product Name %Al2O3 Service Limit SDS
    Plibrico®SR 68 68% 3100F / 1705C SDS
    Plibrico®SR 85 83% 3300F / 1815C SDS
    Plibrico®SR 90 88% 3400F / 1870C SDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®Super F AB 43% 2900F / 1595C SDS
    Plibrico HyRATE®60 AB 60% 3100F / 1705C SDS
    Plibrico HyRATE®80 AB 78% 3200F / 1760C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®68 S 68% 3100F / 1705C SDS
    Plibrico HyRATE®85 S Special 84% 3300F / 1815C SDS