Plicast HyMOR 65C KK

Product: Plicast HyMOR 65 C KK

Product #: 14284

 Service Temperature Limit: 3100°F

 Installation Method:  Casting or Pumping

Shelf Life:  6 months

 Industries:  Mineral Processing, Aluminum, Steel, Refining, Off Gas, Pulp & Paper, Ethanol

Best Applications:  Engineered for higher temperature applications in industrial processes including:

  1. Precast Shapes – including burner cones and piers – various industries
  2. Mineral Processing Kilns – alumina and aggregate calcining
  3. Steel/Ferrous – reheat/forge furnace hearths, jambs, lintels, and lintels
  4. Ladles – impact areas
  5. Aluminum – jambs and lintels

Plibrico TDS Link – https://plibri.co/3gSCaTa

Product Information: Plicast® HyMOR 65 C KK is a 65% alumina low cement castable.   Engineered with a mullite aggregate system and an alumina/mullite enhanced matrix, this super coarse grain material provides improved impact and thermal shock resistance.   Similar to our Plicast HyMOR 3100 Special KK, this materials strength profile, fracture resistance characteristics, and alkali resistance make it ideal for many demanding applications.   These characteristics include:

  • Hot strength at over a wide temperature range
  • Low abrasion loss
  • Good resistance to impact fracture
  • Improved thermal shock resistance
  • Good resistance to alkali vapor attack
  • Resistant of alkali slags

Plicast HyMOR 65 C KK has good flow and setting characteristics allowing it to be place by vibration, casting or pumping.

Available Internationally As:  Plico® Castable  LC 65 C KK

 Plibrico SDS Link – https://plibri.co/2PPgRWO

/by

Plicast HyMOR 3100 Special KK

Product: Plicast HyMOR 3100 Special KK
Product #: 2428

Service Temperature Limit: 3100°F

Installation Method: Casting or Pumping

Shelf Life: 6 months

Industries: Aluminum/Non Ferrous, Steel, Power Generation, Mineral Processing, Refining, Off Gas

Best Applications: Moderate to high temperature applications in industrial processes. Applications span most thermal processing industries and include:
1. Kiln and furnace linings – including walls, hearths, roofs, lintels
2. Incinerators and thermal oxidizers
3. Precast shapes – burner cones, piers
4. Boilers
5. Pulp and paper process units
6. Petro-chemical process vessels

Product Information: Plicast®️ HyMOR®️ 3100 Special KK is considered by many refractory experts to be the “go to” castable workhorse. Based on a mullite aggregate, its versatility and physical characteristics make it highly suitable for a wide variety of applications. Well balanced, the product has exceptional all-around physical characteristics:
• Moderate density and low porosity
• High cold and hot strength
• Low abrasion loss
• High fracture and crack resistance
• Very good hot load and creep resistance
• Moderate coefficient of thermal expansion
• Good resistance to thermal cycling
• Good alkali and slag resistance

Plicast HyMOR 3100 Special KK has excellent flow and setting characteristics allowing it to be place by vibration, casting or pumping.

Available Internationally As: Plico®️ Castable LC 3100 Special KK

/by

Plicast HyMOR 3100 KK

Product: Plicast HyMOR 3100 KK

Product #: 14137

Service Temperature Limit: 3100°F

Installation Method:  Casting or Pumping

Shelf Life:  6 months

Industries:  Power Generation, Mineral Processing, Steel, Aluminum/Non-Ferrous, Boilers, Incineration

Best Applications:  Perfect for Higher temperature applications in industrial processes including:

  1. Precast Shapes – including burner cones and piers – various industries
  2. Mineral Processing Kilns – alumina and aggregate calcining
  3. Steel/Ferrous – reheat/forge furnace hearths, jambs, lintels, walls and roofs
  4. Ladles
  5. Aluminum – jambs, lintels, upper walls, and roofs
  6. Boilers – slag areas
  7. Incinerators

Plibrico TDS Link – https://plibri.co/3mzsXSI

Product Information: Plicast® HyMOR 3100 KK is an 80 % alumina, low cement castable.   This material utilizes a high quality bauxite aggregate system with an alumina enhanced matrix.   Engineered for higher temperature applications in the steel industry, it’s strength profile, fracture resistance, and other characteristics make it ideal for many other applications.   These characteristics include:

  • Hot strength at over a wide temperature range
  • Good resistance to acid to neutral slags
  • Alkali vapor resistance
  • Low abrasion loss < 6cc per ASTM C704
  • Good density and low porosity
  • Good thermal shock and fracture resistance

Plicast HyMOR 3100 KK is very versatile allowing it to be place by vibration, casting or pumping.

Available Internationally As:  Plico® Castable LC 3100 KK

Plibrico SDS Link – https://plibri.co/37w8AQ2

/by

Plicast HyMOR 3000 KK

Product: Plicast HyMOR 3000 KK

Product #: 2109

Service Temperature Limit: 3000°F

Installation Method:  Casting or Pumping

Shelf Life:  6 months

Industries:  Mineral Processing, Steel, Power Generation, Boilers, Incineration, Aluminum, Thermal Oxidizers

Best Applications:  Ideal for field cast and precast applications in industrial processes including:

  1. Precast Shapes – including burner cones and piers – various industries
  2. Mineral Processing Kilns – alumina and aggregate calcining
  3. Steel/Ferrous – reheat/forge furnace hearths, jambs, lintels, sills roof and walls; Pipe covering; Ladles
  4. Aluminum furnaces ( non-contact ) – roofs , upper walls and lintels
  5. Thermal oxidizers – inlets and burner cones, combustion chambers, choke rings
  6. Biomass Furnaces – Walls, combustion chamber, and tuyeres
  7. Boilers – including fluidized bed and recirculating fluidized bed boilers

Plibrico TDS Link – https://plibri.co/3nDPFtP

Product Information: Plicast® HyMOR® 3000 KK is the original “go-to” low cement castable introduced by the Plibrico Company.   The formula has been updated over time to reflect new raw materials and additive technology, as it was when it was first introduced, it is still a top industry performer.   Plicast HyMOR 3000 KK is a super duty class low cement castable based on a super duty aggregate with an enhanced matrix.   As a refractory field favorite, this castable has been used in essentially every industry because of its excellent physical characteristics.   These characteristics include:

  • Very good cold and hot strengths
  • Low abrasion loss:  8cc per ASTM C704
  • Good hot load resistance
  • Thermal shock and fracture resistant

Plicast HyMOR 3000 KK has good flow and setting characteristics allowing it to be place by vibration, casting or pumping.

Available Internationally As:  Plico® Castable LC 3000 KK

Plibrico SDS Link – https://plibri.co/2GYT4lM

/by

Plicast AdMOR 6

Service Temperature Limit

3100°F

Installation Method

Casting

Shelf Life

6 months

Industries

Aluminum, Steel, Power Generation, Mineral Processing, Off Gas

Best Applications

High temperature applications in industrial processes including:

  1. Precast Shapes – including burner cones and piers – various industries
  2. Steel/Ferrous – reheat/forge furnace burner walls
  3. Incinerators and Thermal Oxidizers – combustion and quench chambers, choke rings
  4. Aluminum – regen fired furnace upper walls

Product Information

Plicast® AdMOR 6 KK is a 65% alumina ultra-low cement castable.   It is the andalusite aggregate system and matrix base that makes this material different and unique.   The refractory was specifically designed to optimize specific properties at elevated temperatures as compared mullite and bauxite based low and ultra-low cement castables.   Enhanced characteristics include:

  • Higher hot strengths above 2000°F
  • Relatively low modulus of elasticity as compared to its hot strength
  • Optimized high temperature >2000°F thermal cycling characteristics:
    • Higher % of strength, MOR & MOE retained after cycling
    • Excellent crack initiation and propagation resistance
  • Moderate thermal expansion
  • Superior hot loading resistance
    • Low TEUL (Thermal Expansion Under Load)
    • Very low Creep @ 2600°F
    • Excellent alkali vapor resistance

This castable differs from the very popular Plicast HyMOR® 3100 Special KK, Plicast HyMOR 70 KK, and Plicast Super HyMOR 65 KK due to its andalusite aggregate and matrix system.

/by

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®Super F AB58%2900F / 1590CSDS
    Plibrico®60 AB58%3100F / 1705CSDS
    Plibrico®80 AB78%3200F / 1760CSDS
    Plibrico®90 AB90%3400F / 1871CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®55 S54%3000F / 1648CSDS
    Plibrico®68 S68%3100F / 1705CSDS
    Plibrico®68 SA68%3100F / 1705CSDS
    Plibrico®85 S Special83%3300F / 1815CSDS
    Plibrico®90 S90%3400F / 1870CSDS
    Plibrico®SiC 80(80% SiC)2700F / 1480CSDS

    (fine grain – soft)

    Product Name%Al2O3Service LimitSDS
    Plibrico®SR 6868%3100F / 1705CSDS
    Plibrico®SR 8583%3300F / 1815CSDS
    Plibrico®SR 9088%3400F / 1870CSDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®Super F AB43%2900F / 1595CSDS
    Plibrico HyRATE®60 AB60%3100F / 1705CSDS
    Plibrico HyRATE®80 AB78%3200F / 1760CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®68 S68%3100F / 1705CSDS
    Plibrico HyRATE®85 S Special84%3300F / 1815CSDS