Redline Redphos 68SA

Product: Redline Redphos 68SA

Product #: 59101

Service Temperature Limit: 3100°F

Shelf Life: 4 months

Product Information: Redline Redphos 68SA is a mullite-based phosphate-bonded plastic refractory.   This refractory incorporates a high mullite-content aggregate in an alumina-fortified phosphate bonding matrix that utilizes a proprietary monoaluminium phosphate.   Redline Redphos 68SA offers a specific sizing distribution that gives the plastic a smoother texture which can result in improved ramming characteristics with reduced slumping.

Redline Redphos 68SA is ordered in either Stiff (SF), Standard (SD), or Export (EX) workability to conform to installation and storage requirements.

/by

Redline Redphos 70A Fine

Product: Redline Redphos 70A Fine

Product #: 59001

Service Temperature Limit: 

Aluminum Contact –  1700°F

Non-Contact – 3100°F

Shelf Life: 4 months

Product Information: Redline Redphos 70A Fine is a fine grained, phosphate bonded, high purity mullite patching plastic.   It is designed for patching existing refractory surfaces in molten aluminum contact applications.   This material provides excellent non-wetting properties and resistance to metal penetration.

/by

Plibrico Super F AB

Product: Plibrico Super F AB
Product #: 10008

Service Temperature Limit: 2900°F

Installation Method: Ramming
Shelf Life: 12 months

Industries: Aluminum, Steel, Mineral Processing, Power Generation, Off-Gas, Pulp & Paper, Refining, Sugar, Ethanol

Best Applications: Applications in industrial processes which require a super duty plastic including:

  1. Steel and foundry – reheat furnaces, soaking pits, and forge furnaces
  2. Boilers
  3. Gypsum kettles
  4. Cement kiln firing hoods
  5. Incinerators
  6. Aluminum – furnace upper walls and roofs

Plibrico TDS Link – http://bit.ly/2CUWD8o

Product Information: Plibrico Super F AB is the company’s super duty class air bond plastic refractory. Evolving from the original plastic material that Plibrico pioneered in the early 20th century, this material is field tested and has withstood the test of time. Economical with great workability, this workhorse can be used for a wide variety of applications. Product attributes include:

  • Contains an air bonding agent for better low temperature strength and shrinkage control
  • Good volume stability through its temperature range
  • Good hot lad resistance – <6% at 2640°F
  • Meets ASTM classification C673 Super Duty

Material ordered in either Stiff (SF), Standard (SD), or Export (EX) workability.

Available Internationally As: Plico®️ Super F AB

Plibrico SDS Link – http://bit.ly/32fE3Cn

 

/by

Plibrico SR-90

Product: Plibrico SR 90
Product #: 12011

Service Temperature Limit: 3400°F

Installation Method: Ramming
Shelf Life: 6 months

Industries: Steel, Foundry, Power Generation, Aluminum, Boilers, Incinerators, Burners

Best Applications: Due to its high workability and fine grain sizing, Plibrico SR 90 is ideal for patching and repairing worn refractory, thin lining applications and for use on studded tubes. Other applications include:

  1. Burner cones
  2. Steel and foundry:
  3. Water cooled pipe covering
  4. Ladle lips
  5. Runner linings
  6. Utility boilers – coal and oil fired:
  7. Burner throats
  8. Slag taps
  9. Cyclone burners
  10. Hazardous waste incinerators – slagging areas
  11. Aluminum furnace repairs

Plibrico TDS Link – http://bit.ly/2YwImYq

Product Information: Plibrico®️ SR 90 is a high alumina, phosphate bond plastic refractory. Manufactured with a fine grain sizing and a soft plastic consistency, this 3400°F service limit plastic utilizes a corundum and bauxite aggregates in an alumina fortified phosphate bonding matrix utilizing Plibrico’s proprietary monoaluminium phosphate. The result is a very workable phosphate bonded plastic refractory with low impurities, iron and alkalies, and stable storage characteristics. Other product attributes include:

  • Good hot strength
  • Excellent abrasion resistance – 5cc loss per ASTM C 704
  • Very good slag resistance
  • Non-wetting to aluminum
  • Meets ASTM classification C673 90% Alumina

Available Internationally As: Plico®️ SR 90

Plibrico SDS Link – http://bit.ly/2P37jHW

/by

Plibrico SR-85

Product: Plibrico SR-85

Product #: 10085

Service Temperature Limit:  3300°F

Installation Method:  Ramming

Shelf Life: 6 months

Industries: Boilers, Power Generation, Incinerators, Aluminum

Best Applications: Engineered for industrial processes that require repair/service material for a more severe, higher temperature application.   Formulated with a phosphate bonded plastic, applications include:

  1. Municipal wastewater wall tubes to ram around studs
  2. Incinerators: slagging area repairs
  3. Cyclone burner repair
  4. Slag dam repair in utility boilers
  5. Aluminum: run-through troughs and launder repairs

Plibrico TDS Link – https://plibri.co/2XvJNKy

Product Information: Plibrico® SR-85 is an 80% alumina, bauxite based, soft, fine-grained phosphate bonded plastic.   Designed for thinner applications, it works great for patching and repairing existing linings that see more severe service conditions.   Plibrico SR-85 chemically bonds very well to existing refractory, making it an excellent material choice to combat corrosion to slags and molten aluminum penetration.   Product advantages include:

  • Soft putty-like consistency for ease of use
  • Chemically bonds to existing refractory for long repair life
  • Good alkali resistance
  • Non-wetting to aluminum

Available Internationally As: Plico® SR-85

Plibrico SDS Link – https://plibri.co/2XCh6f2

/by

Plibrico SiC 80

Product: Plibrico SiC 80
Product #: 10075

Service Temperature Limit: 2700°F

Installation Method: Ramming
Shelf Life: 6 months

Industries: Power Generation, Waste-To-Energy, Boilers, Burners

Best Applications: Plibrico SiC 80 is designed for applications where high thermal conductivity and/or slag resistance is required. For example, a thin wall covering on heat exchanger tubes in a slagging or corrosive environment. Other applications include:

  1. Burners
  2. Utility boilers – coal and oil fired
  3. Cyclone burners
  4. Circulating fluidized bed boilers
  5. Municipal waste co-gen incinerators

Plibrico TDS Link – http://bit.ly/2Lkooe8

Product Information: Plibrico®️ SiC 80 is a phosphate bond, silicon carbide plastic refractory. This product incorporates Plibrico’s proprietary monoaluminium phosphate, with a refractory grade silicon carbide in an alumina fortified phosphate bonding matrix. The result of this combination is a high silicon content phosphate bonded plastic refractory with low impurities – iron and alkalis. Plibrico SiC 80 also has good workability and stable storage characteristics. Other product attributes include:

  • High silicon carbide content – 80% SiC
  • Good hot strength
  • Low shrinkage
  • High thermal conductivity
  • Very good slag resistance
  • Good thermal shock resistance
  • Plibrico SiC 80 is available in standard, stiff and soft consistencies to conform to installation and storage requirements.

Material ordered in either Stiff (SF), Standard (SD), or Export (EX) workability.

Available Internationally As: Plico®️ SiC 80

Plibrico SDS Link – http://bit.ly/2YjbrGP

/by

Plibrico 90-S

Product: Plibrico 90 S
Product #: 10033

Service Temperature Limit: 3400°F

Installation Method: Ramming
Shelf Life: 4 months

Industries: Steel, Power Generation, Boilers, Incineration, Aluminum/Non-Ferrous

Best Applications: This material is best used for applications in industrial processes which require a high temperature, high strength phosphate bonded plastic including:

  1. Burner cones
  2. Steel and foundry – reheat and forge furnaces hearths
  3. Utility boilers – coal and oil fired
  4. Burner throats
  5. Slag taps/floors
  6. Cyclone burners
  7. Hazardous waste incinerators – slagging areas
  8. Sulfur recovery units

Plibrico TDS Link – http://bit.ly/2OWBLT5

Product Information: Plibrico®️ 90 S is a very high alumina, phosphate bond plastic refractory. With a service limit of 3400°F, this plastic utilizes a corundum in an alumina fortified phosphate bonding matrix utilizing Plibrico’s proprietary monoaluminium phosphate. The result is a phosphate bonded plastic refractory with low impurities, iron and alkalies, good workability and stable storage characteristics. Other product attributes include:

  • High service limit – 3400°F
  • Good hot strength
  • Good volume stability through its service temperature range
  • Excellent abrasion resistance – 5cc loss per ASTM C 704
  • Very good slag resistance
  • Non-wetting to aluminum
  • Meets ASTM classification C673 90% Alumina
  • Plibrico 90 S is available in standard, stiff and soft consistencies to conform to installation and storage requirements.

Material ordered in either Stiff (SF), Standard (SD), or Export (EX) workability.

Available Internationally As: Plico®️ 90 S

Plibrico SDS Link – http://bit.ly/2XKelEp

/by

Plibrico 90 AB

Product: Plibrico 90 AB

Product #: 10090

Service Temperature Limit: 3400°F

Installation Method:  Ramming

Shelf Life:  12 months

Industries:  Steel, Foundry, Mineral Processing, Power Generation, Boilers, Incineration, Pulp & Paper, Refining

Best Applications:  Engineered for industrial process applications which require very high purity alumina materials.   Applications include:

  1. Burner Cones
  2. Steel and Foundry: reheat furnaces, soaking pits, forge furnaces
  3. Boilers
  4. Incinerators

Plibrico TDS Link – https://plibri.co/381NVEz

Product Information: Plibrico® 90 AB is Plibrico’s highest temperature standard air-bonded plastic.   This material was designed for service at the most elevated temperatures, where the low temperature strength of a chemically bonded plastic is unnecessary or phosphorus contamination is critical.   Plibrico 90 AB uses a white fused alumina aggregate with an alumina fortified air bonding matrix, the result is a more reliable and consistent plastic refractory with high refractoriness.   In addition, this material also shows excellent CO resistance and hot strength.   Product advantages include:

  • Better low temperature strength due to air-bonding agent
  • High refractoriness
  • Excellent CO resistance
  • High hot strength
  • High service limit: 3400°F
  • Good thermal shock resistance
  • Moderate slag resistance

Material ordered in either Stiff (SF), Standard (SD), or Export (EX) workability.

Available Internationally As:  Plico® 90 AB

Plibrico SDS Link – https://plibri.co/2MsCTAA

/by

Plibrico 85-S Special

Product: Plibrico 85-S Special

Product #: 10035

 Service Temperature Limit: 3300°F

 Installation Method:  Ramming

Shelf Life:  4 months

 Industries:  Aluminum, Steel, Incineration, Waste-To-Energy, Boilers

Best Applications:  Industrial process applications that require a high temperature, high strength phosphate bonded plastic including:

  1. Aluminum furnace – metal contact areas
  2. Ladles – ferrous and non ferrous
  3. Burner cones
  4. Steel and foundry – reheat and forge furnaces hearths
  5. Utility boilers – coal and oil fired
    • Burner throats
    • Slag taps/floors
    • Cyclone burners
  6. Hazardous waste incinerators – slagging areas

 Plibrico TDS Link – https://plibri.co/3ftAazx

Product Information: Plibrico® 85-S Special is an 85% alumina, phosphate bond plastic refractory.   With a service limit of 3300°F, this plastic employs a premium bauxite aggregate base in an alumina fortified phosphate bonding matrix.   Utilizing Plibrico’s proprietary monoaluminium phosphate, Plibrico 85-S Special yields a higher mullite content 85% phosphate bonded plastic with improved hot strength and stable storage characteristics.   Other attributes include:

  • High service limit: 3300°F
  • Good elevated temperature hot strength
  • Good volume stability through its service temperature range
  • Good thermal shock resistance
  • Excellent abrasion resistance: 5cc loss per ASTM C 704
  • Good slag resistance
  • Non-wetting to aluminum
  • Meets ASTM classification C673 85% Alumina

Plibrico 85-S Special is ordered in either Stiff (SF), Standard (SD), or Export (EX) workability to conform to installation and storage requirements.

Available Internationally As:  Plico® 85-S Special

 Plibrico SDS Link – https://plibri.co/2Ax5S0c

/by

Plibrico 80 AB

Product: Plibrico 80 AB
Product #: 10016

Service Temperature Limit: 3200°F

Installation Method: Ramming
Shelf Life: 12 months

Industries: Aluminum, Steel, Foundry, Mineral Processing, Power Generation, Pulp & Paper, Refining

Best Applications: Applications in industrial processes which require a super duty plastic including:

  1. Burner cones
  2. Steel and foundry – reheat furnaces, soaking pits, and forge furnaces
  3. Boilers
  4. Incinerators
  5. Aluminum – furnace upper walls and roofs

Plibrico TDS Link – http://bit.ly/2XOj0Ud

Product Information: Plibrico 80 AB is Plibrico’s highest temperature standard air bond plastic refractory. This tried-and-true plastic utilizes a bauxite aggregate in an alumina fortified air bonding matrix. The result is a reliable and consistent plastic refractory with high refractoriness and volume stability. Product attributes include:

  • Contains an air bonding agent for better low temperature strength and shrinkage control
  • Good volume stability at high temperatures
  • Good thermal shock and crack resistance
  • Moderate slag resistance
  • Meets ASTM classification C673 80% Alumina

Material ordered in either Stiff (SF), Standard (SD), or Export (EX) workability.

Available Internationally As: Plico®️ 80 AB

Plibrico SDS Link – http://bit.ly/2Y3JDsm

/by

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®Super F AB58%2900F / 1590CSDS
    Plibrico®60 AB58%3100F / 1705CSDS
    Plibrico®80 AB78%3200F / 1760CSDS
    Plibrico®90 AB90%3400F / 1871CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®55 S54%3000F / 1648CSDS
    Plibrico®68 S68%3100F / 1705CSDS
    Plibrico®68 SA68%3100F / 1705CSDS
    Plibrico®85 S Special83%3300F / 1815CSDS
    Plibrico®90 S90%3400F / 1870CSDS
    Plibrico®SiC 80(80% SiC)2700F / 1480CSDS

    (fine grain – soft)

    Product Name%Al2O3Service LimitSDS
    Plibrico®SR 6868%3100F / 1705CSDS
    Plibrico®SR 8583%3300F / 1815CSDS
    Plibrico®SR 9088%3400F / 1870CSDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®Super F AB43%2900F / 1595CSDS
    Plibrico HyRATE®60 AB60%3100F / 1705CSDS
    Plibrico HyRATE®80 AB78%3200F / 1760CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®68 S68%3100F / 1705CSDS
    Plibrico HyRATE®85 S Special84%3300F / 1815CSDS