Pli-Shot HyMOR CL AZS KK

Product: Pli-Shot HyMOR CL AZS KK

Product #: 15411

 Service Temperature Limit: 2800°F

 Installation Method:  Shotcrete and Casting

Shelf Life:  6 months

 Industries:  Mineral Processing, Incineration, Power Generation

Best Applications:  Engineered for alkali attack applications in industrial processes including:

  1. Precast Shapes – various industries
  2. Cement kiln preheaters
  3. Lime kilns
  4. Biomass furnaces
  5. Incinerators

Plibrico TDS Link – https://plibri.co/3jhfi1j

Product Information: Pli-Shot™ HyMOR® CL AZS KK is a low cement castable designed for both shotcrete and casting application.   This premium castable combines an electro fused AZS (Alumina-zirconia-silica) aggregate and matrix, with a 20% silicon carbide addition.   Pli-Shot HyMOR CL 20-M KK was specifically engineered for extreme alkali, alkali sulfate, and alkali chloride corrosion and attack applications in the cement and lime industries.   Operational benefits and characteristics include:

  • High density and low porosity
  • Very good strength – cold and hot
  • Low abrasion loss < 10 cc per ASTM C704
  • Good volume stability and moderate thermal expansion
  • Extremely resistant to alkali and alkali sulphate corrosion, including: Na2SO4, K2SO4, NaCl and KCl
  • Thermal cycling resistant
  • Versatile installation – shotcrete and casting

Available Internationally As:  Plico® Shotcrete LC CL AZS KK

 Plibrico SDS Link – https://plibri.co/3fP8FBg

/by

Pli-Shot HyMOR CL 20-M KK

Product: Pli-Shot HyMOR CL 20-M KK

Product #: 15406

 Service Temperature Limit: 2800°F

 Installation Method:  Shotcreting & Casting

Shelf Life:  6 months

 Industries:  Mineral Processing, Power Generation, Incineration

Best Applications:  Terrific for alkali attack applications in industrial processes including:

  1. Precast Shapes – various industries
  2. Cement kiln preheaters
  3. Lime kilns
  4. Biomass Furnaces
  5. Incinerators

Plibrico TDS Link – https://plibri.co/2VS5W1G

Product Information: Pli-Shot™ HyMOR® CL 20-M KK is a low cement castable designed for both shotcrete and casting application.   This tough castable combines a mullite aggregate and matrix with a 20% silicon carbide addition.   Pli-Shot HyMOR CL 20-M KK was specifically engineered for applications in the cement and lime industries; functions where it is critical that the refractories stand-up to alkali and alkli sulfate corrosion and attack.   Operational benefits and characteristics include:

  • Good strength: cold and hot
  • Low abrasion loss < 10 cc per ASTM C704
  • Good volume stability and moderate thermal expansion
  • Resistant to alkali and alkali sulphate corrosion, including: Na2SO4, K2SO4, NaCl and KCl
  • Thermal cycling resistant
  • Versatile installation – shotcrete and casting

Available Internationally As:  Plico® Shotcrete LC CL 20-M KK 

Plibrico SDS Link – https://plibri.co/2C9uUCS

/by

Pligun CL 5-M KK

Product: Pligun CL 5-M KK

Product #: 13077

Service Temperature Limit:  2800°F

Installation Method:  Gunning

Shelf Life: 9 months

Industries: Mineral Processing: Cement & Lime Plants

Best Applications: Engineered for high temperature applications in industrial processes that require enhanced performance refractories to help guard against sever alkali attacks, including:

  1. Stage 1 through 4 Cyclones & Ducts
  2. Lower Preheat & Pre-calciner Risers
  3. Tertiary Air Ducts

Plibrico TDS Link – https://plibri.co/39lONnv

Product Information: Pligun® CL 5-M KK is a mullite based gun mix, specially formulated with 5% SiC in the refractory matrix.   The special SiC formulation gives this Pligun material an enhanced performance against alkali attack in more severe cement-lime mineral processing applications.   As the trend towards alternate fuel utilization becomes more prevalent in the industry, enhanced gun mixes such as Pligun CL 5-M KK are becoming key to refractory lining longevity.   Alternate fuel impurities can accelerate build up on refractory surfaces, leading to a premature life-span of the refractory lining.   The inclusion of SiC fines into the refractory matrix aids in extending refractory life by forming a glassy Si layer which reacts with the alkali and seals the refractory to further alkali, sulfate, or chloride penetration.   Product advantages include:

  • Good gunning characteristics
  • Good strength to density ratio
  • Moderate Thermal Expansion
  • Moderate Thermal Conductivity
  • Improved alkali corrosion resistance over traditional standard gun mixes

Available Internationally As: Plico® Gun Mix CL 5-M KK

Plibrico SDS Link – https://plibri.co/3Cxwt7l

/by

Pligun CL 5-F KK

Installation Method: Gunning

Shelf Life: 9 months

Industries: Mineral Processing, Cement, Lime

Best Applications: High Temperature applications in industrial processes where there is a requirement for normal duty refractories with some alkali reaction potential, including:

Stage 1 through 4 Cyclones and Ducts
Lower Preheat and Pre-calciner Risers
Tertiary Air Ducts
Plibrico TDS Link – https://plibri.co/3t9yrHu

Product Information: Pligun® CL 5-F KK is a super-duty gun mix specially formulated with 5% SiC in the refractory matrix. The SiC infused matrix gives this material a heightened performance against alkali attack in normal duty service cement-lime mineral processing applications where, traditionally, conventional gun mixes were once used. Enhanced gun mixes such as Pligun CL 5-F KK are becoming more important as the trend toward alternate fuel utilization becomes more prevalent. Alternative fuel impurities can accelerate build up on refractory surfaces, leading to a premature life-span of the lining. The application of SiC fines into the refractory matrix aids in extending the refractory life by forming a glassy Si layer which reacts with the alkali and seals the refractory against further alkali, sulfate, or chloride penetration.

Product advantages include:

Good gunning characteristics
Good strength to density ratio
Moderate Thermal Expansion
Moderate Thermal Conductivity
Improved alkali corrosion resistance over traditional standard gun mixes
Available Internationally As: Plico® Gun Mix CL 5-F KK

Plibrico SDS Link – https://plibri.co/3r3fwMr

/by

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®Super F AB58%2900F / 1590CSDS
    Plibrico®60 AB58%3100F / 1705CSDS
    Plibrico®80 AB78%3200F / 1760CSDS
    Plibrico®90 AB90%3400F / 1871CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®55 S54%3000F / 1648CSDS
    Plibrico®68 S68%3100F / 1705CSDS
    Plibrico®68 SA68%3100F / 1705CSDS
    Plibrico®85 S Special83%3300F / 1815CSDS
    Plibrico®90 S90%3400F / 1870CSDS
    Plibrico®SiC 80(80% SiC)2700F / 1480CSDS

    (fine grain – soft)

    Product Name%Al2O3Service LimitSDS
    Plibrico®SR 6868%3100F / 1705CSDS
    Plibrico®SR 8583%3300F / 1815CSDS
    Plibrico®SR 9088%3400F / 1870CSDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®Super F AB43%2900F / 1595CSDS
    Plibrico HyRATE®60 AB60%3100F / 1705CSDS
    Plibrico HyRATE®80 AB78%3200F / 1760CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®68 S68%3100F / 1705CSDS
    Plibrico HyRATE®85 S Special84%3300F / 1815CSDS