Product: Redline Redcast SC 60

Product #: 52104

Service Temperature Limit:

Aluminum Contact – 1700°F

Non-Contact – 2700°F

Shelf Life: 6 months

Product Information: Redline Redcast SC 60 is a low cement, high purity silicon carbide castable that provides excellent abrasion resistance, high thermal conductivity, and outstanding thermal shock resistance.   It will perform particularly well in areas subjected to high impact such as aluminum transfer troughs and tapout blocks in aluminum melting and holding furnaces.

Product: Redline Redflow 60

Product #: 52110

Service Temperature Limit:  3100°F

Shelf Life: 6 months

Product Information: Redline Redflow 60 is a high strength, super duty, low moisture castable engineered to have good handling and flow characteristics.   It can be pumped and will meet most severe service conditions.   Applications include: aluminum furnace roofs and upper sidewalls, forge and heat treating furnaces, kiln car tops, rotary kiln linings, and dryer furnaces.

Product: Redline Redcast 50

Product #: 52108

Service Temperature Limit:  3000°F

Shelf Life: 6 months

Product Information: Redline Redcast 50 is a high strength, first quality castable engineered for moderate to severe conditions.   Applications include: forge and heat treating furnaces, homogenizing furnace pads, small aluminum furnace roofs and upper sidewalls, kiln cartops.

Product: Redline Redcast SC

Product #: 52103

Service Temperature Limit:

Aluminum Contact –  1700°F

Non-Contact – 3000°F

Shelf Life: 6 months

Product Information: Redline™ Redcast SC is a high purity, mullite based low cement castable that contains a silicon carbide addition for increased abrasion and thermal shock resistance.   It is designed for areas that are subjected to high degrees of impact and thermal shock from molten aluminum.   This material can also be utilized in molten copper transfer troughs.

Product: Redline Redcast 60-19

Product #: 52102

Service Temperature Limit:

Aluminum Contact –  1700°F

Non-Contact – 3000°F

Shelf Life: 6 months

Product Information: Redline™ Redcast 60-19 is a mullite based low cement castable that contains a silicon carbide addition for increased abrasion and thermal shock resistance. It is designed for areas that are subjected to high degrees of impact and thermal shock from molten aluminum. This material can also be utilized in molten copper transfer troughs.

Product: Plicast Al-Tuff 85 BF C KK

Product #: 3269

 

Service Temperature Limit:

Aluminum Contact – 1700°F

Non-Contact – 3100°F

Installation Method:  Casting or Pumping

Shelf Life:  6 months

Industries:  Aluminum

 

Best Applications:  This aluminum resistant, high alumina castable is engineered to be used in applications that include:

  1. Precast Shapes
  2. Jambs and Sills in an aluminum furnace
  3. Aluminum troughs, high wear areas

 

Plibrico TDS Link – https://plibri.co/tds-plicast-al-tuff85bfc

Product Information: Plicast® A-Tuff® 85 BF C KK is a brown fused, aluminum resistant, high alumina based low cement castable.   This coarse grain material is engineered to provide excellent resistance to thermal cycling, impact and fracture.   Made with 85% brown fused alumina, this non-wetting castable also offers excellent abrasion resistance and superior strength.   Plicast Al-Tuff 85 BF C KK combination of strength, toughness, alumina content, and other compositional features make it an excellent product for many applications.   Product advantages include:

  • Excellent abrasion resistance < 5 cc
  • Excellent CCS and hot strength
  • Non-wetting to aluminum
  • High density and low shrinkage
  • Great casting properties

Highly versatile, this material can be vibration cast, cast or pumped.

Available Internationally As:  Plico® Castable A-T 85 BF C

 

Plibrico SDS Link – https://plibri.co/3YynDCD

 

Product: Plicast Al-Tuff Y69B KK

Product #: 14217

 Service Temperature Limit:

Aluminum Contact:  1700°F

Non-Contact: 2800°F

 Installation Method:  Casting or Pumping

Shelf Life:  6 months

 Industries:  Aluminum

Best Applications:  Field cast and precast shape applications for aluminum melting and holding furnaces where high strength and abrasion resistance are required including:

  1. Tap out blocks
  2. Troughs
  3. Ladle impact pads

 Plibrico TDS Link – https://plibri.co/2UtaOtK

Product Information: Plicast® Al-Tuff® Y69B KK is a non-wetting, silicon carbide based low cement castable.   This product with a 76% silicon carbide content, has excellent aluminum non-wetting characteristics.   Further, it’s engineered with enhanced physical properties along with versatile flow characteristics, allowing it to be vibration cast, cast or even pumped.   Product advantages include:

  • High strength – both hot and cold
  • Low abrasion loss: 7cc
  • High density and low porosity
  • High thermal conductivity
  • Good thermal shock resistance
  • Moderate thermal expansion

Available Internationally As:  Plico® Castable A-T Y69B KK

 Plibrico SDS Link – https://plibri.co/2AdIAwc

Product: Plicast Al-Tuff TSR Plus KK

Product #: 14204

Service Temperature Limit:

Aluminum Contact –  1700°F

Non-Contact – 2500°F

Installation Method:  Casting

Shelf Life: 6 months

Industries: Aluminum

Best Applications:  Engineered for applications in aluminum melting and processing operations that require resistance to thermal cycling. Typical applications include:

  1. Aluminum Transfer Ladles
  2. Troughs
  3. Crucibles
  4. Filter Boxes

Plibrico TDS Link – https://plibri.co/3NlsiAT

Product Information: Plicast®️ Al-Tuff® TSR Plus KK is a thermal shock resistant low cement castable.   Utilizing a fused silica aggregate system with a mullite matrix, this castable was engineered to have exceptional thermal shock resistance and improved physical properties as compared to other singular fused silica thermal shock resistant castables.   Plicast Al-Tuff TSR Plus KK’s product characteristics include:

  • Excellent thermal shock resistance
  • Hot strength at over a wide temperature range
  • Low abrasion loss
  • Good fracture and crack resistance
  • Low thermal expansion
  • Moderate density

Available Internationally As: Plico® Castable A-T TSR Plus

Plibrico SDS Link – https://plibri.co/3OCqHHM

Service Temperature Limit

Aluminum Contact – 1700oF

Non-Contact – 3100°F

Installation Method

Cast or Pump

Shelf Life

6 months

Industries

Aluminum

Best Applications

Field cast and precast shape applications for aluminum melting and holding furnaces include:

  1. Hearths
  2. Division/hot walls
  3. Ramps
  4. Sills
  5. Jambs
  6. Ladle impact pads

Product Information

Plicast Al-Tuff 80 C KK is a version of Plicast Al-Tuff 3100 KK that utilizes an addition super coarse size bauxite.   This product has the same excellent aluminum non-wetting characteristics and physical properties of Plicast Al-Tuff 3100 KK but with enhanced crack, impact, wear, and thermal cycling resistance due to the super coarse aggregate.   Unlike many other competitive super coarse aggregate products which require intense vibration for placement, Plicast Al-Tuff 80 C KK possesses the same versatile flow characteristics typical of Plibrico’s low cement castable offerings – You can cast or even pump.

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®Super F AB58%2900F / 1590CSDS
    Plibrico®60 AB58%3100F / 1705CSDS
    Plibrico®80 AB78%3200F / 1760CSDS
    Plibrico®90 AB90%3400F / 1871CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®55 S54%3000F / 1648CSDS
    Plibrico®68 S68%3100F / 1705CSDS
    Plibrico®68 SA68%3100F / 1705CSDS
    Plibrico®85 S Special83%3300F / 1815CSDS
    Plibrico®90 S90%3400F / 1870CSDS
    Plibrico®SiC 80(80% SiC)2700F / 1480CSDS

    (fine grain – soft)

    Product Name%Al2O3Service LimitSDS
    Plibrico®SR 6868%3100F / 1705CSDS
    Plibrico®SR 8583%3300F / 1815CSDS
    Plibrico®SR 9088%3400F / 1870CSDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®Super F AB43%2900F / 1595CSDS
    Plibrico HyRATE®60 AB60%3100F / 1705CSDS
    Plibrico HyRATE®80 AB78%3200F / 1760CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®68 S68%3100F / 1705CSDS
    Plibrico HyRATE®85 S Special84%3300F / 1815CSDS