Product: Plicast LWI 28
Product #: 16009

Service Temperature Limit: 2800°F

Installation Method: Casting
Shelf Life: 9 months

Industries: Mineral Processing, Aluminum, Steel, Power Generation, Boilers, Incineration, Off-Gas, Refining

Best Applications: Functions and equipment requiring a very high temperature insulating component or reducing atmosphere resistant component. Typical applications include:

  1. Fired heaters – radiant sections and roofs
  2. Atmosphere heat treat furnaces and vessels
  3. Incinerators and thermal oxidizers
  4. Sulfur recovery units – back up insulation

Plibrico TDS Linkhttp://bit.ly/2ZiPBXS

Product Information: Plicast®️ LWI®️ 28 is a very high temperature insulating castable. A service limit of 2800°F and good strength make it suitable to use as either a backup insulating component in high temperature applications, or as a primary lining material in less severe applications. Its low iron content makes it ideal for use in reducing combustion applications. Product advantages include:

  • 2800°F service limit
  • Low iron content – <1%
  • Medium density – ~85 pcf
  • Good CCS and hot strength
  • Moderately low thermal conductivity
  • Good volume stability, positive linear change above 2500°F to its service limit
  • Good casting consistency

Available Internationally As: Plico®️ Castable LW 28

Plibrico SDS Linkhttp://bit.ly/2zAi9Nj

Product: Plicast LWI 26

Product #: 16008

Service Temperature Limit:  2600°F

Installation Method:  Casting

Shelf Life: 9 months

Industries: Mineral Processing, Refining, Aluminum, Steel, Power Generation, Off Gas, Incinerators, Thermal Oxidizers

Best Applications: Engineered for applications that operate with higher service limits or need a low-iron insulator while remaining thermally efficient.   Applications include:

  1. FCC Units
  2. Sulfur Recovery Units
  3. Boilers
  4. Incinerators and Thermal Oxidizers
  5. Fired Process Heaters

Plibrico TDS Link – https://plibri.co/3rOGusH

Product Information: Plicast® LWI 26 is a low-iron, high temperature insulating castable.   With a service limit of 2600°F, Plicast LWI 26 possesses moderate density and good thermal efficiency.   The combination of its density and thermal efficiency allows this product to be used as either an effective backup insulating component, or as a primary lining material in less demanding, moderate temperature applications.   It’s low-iron content make it ideal for reducing atmospheres.   Product advantages include:

  • Low Iron Content <1.0%
  • Moderate Density
  • 2600°F Service Limit
  • Moderately Low Thermal Conductivity
  • Versatility for a wide range of applications

Available Internationally As: Plico® Castable LW 26

Plibrico SDS Link – https://plibri.co/3fkcrV2

Product: Plicast LWI 24 R KK

Product #: 16031

Service Temperature Limit:  2450°F

Installation Method:  Casting

Shelf Life: 12 months

Industries: Petrochemical, Thermal Oxidizers, Power Generation, Steel, Incinerators, Ethanol

Best Applications:  Engineered for intermediate temperature insulating components requiring a low-iron content refractory, applications include:

  1. Petrochemical heater walls and roofs
  2. Regenerator linings in FCCU processes
  3. Incinerators
  4. Thermal Oxidizers
  5. CO Furnaces

Plibrico TDS Link – https://plibri.co/3jadLvf

Product Information: Plicast®️ LWI® 24 R KK is an intermediate temperature low-iron insulating castable formulated with high purity calcium aluminate cement.   This product has a good balance of strength, density, and service limit.   Great for a back-up or hot face lining in reducing atmosphere industrial applications.   Product advantages include:

  • Good CCS and hot strength for a light-weight insulator
  • Medium density: 80 pcf
  • 2450°F service limit
  • Moderate thermal conductivity
  • Low iron content

Available Internationally As: Plico® Castable LW 24 R KK

Plibrico SDS Link – https://plibri.co/3qReyFm

Product: Plicast LWI 24 P

Product #: 16052

Service Temperature Limit:  2450°F

Installation Method:  Pumping

Shelf Life: 6 months

Industries: Aluminum, Mineral Processing, Power Generation, Boilers, Incineration, Off Gas, Thermal Oxidizers

Best Applications: Engineered for applications requiring a high temperature insulating component, where pumping is the preferred method of installation.   Applications include:

  1. Reheat, Car Bottom, and Annealing Furnaces – backup insulation
  2. Boilers
  3. Incinerators and Thermal Oxidizers
  4. Aluminum furnaces – upper wall and roof back up insulation
  5. Mineral Processing Kilns – backup insulation
  6. Fired Process Heaters
  7. Dryers
  8. Stacks

Plibrico TDS Link – https://plibri.co/3FpZ68b

Product Information: Plicast® LWI 24 P is a high temperature insulating castable, with a service limit of 2450°F.   Plicast LWI 24 P possesses low density, and has good thermal efficiency, making it suitable for use as either an effective backup insulating component or as a primary lining material in less demanding, lower temperature applications.   In addition, this material can be pumped to ease the installation of large projects.   Product advantages include:

  • Pumpable
  • Low Density and Low Thermal Conductivity
  • Adequate Strength
  • Versatility for a wide range of applications
  • Long Storage Life

Available Internationally As: Plico® Castable LW 24-P

Plibrico SDS Link – https://plibri.co/30yNKQ0

Product: Plicast LWI 24

Product #: 16007

 Service Temperature Limit: 2450°F

 Installation Method:  Casting

Shelf Life:  12 months

 Industries:  Aluminum, Mineral Processing, Power Generation, Boilers, Incineration, Off Gas, Thermal Oxidizers

Best Applications:  Engineered for applications requiring a high temperature insulating component, these include:

  1. Reheat, car bottom and annealing furnaces – backup insulation
  2. Boilers
  3. Incinerators and thermal oxidizers
  4. Aluminum furnaces – upper wall and backup insulation
  5. Mineral processing kilns – backup insulation
  6. Fired process heaters
  7. Dryers

Plibrico TDS Link – https://plibri.co/2RDMljk

Product Information: Plicast® LWI® 24 is the workhorse of Plibrico’s insulating refractory castables.   A service limit of 2450°F, moderate density, and adequate strength, make this material suitable for use as either as an efficient backup insulating component, or a primary lining material in less demanding, moderate temperature applications.   Product advantages include:

  • Good strength
  • 2450°F service limit
  • Medium density ~80 pcf
  • Moderately low thermal conductivity
  • Good volume stability
  • Good casting consistency
  • Good product storage life: 12 mth

Available Internationally As:  Plico® Castable LW 24

 Plibrico SDS Link – https://plibri.co/2HeEQh7

Product: Plicast LWI 22

Product #: 16015

Service Temperature Limit: 2200°F

Installation Method:  Casting

Shelf Life:  12 months

Industries:  Aluminum, Mineral Processing, Steel, Power Generation, Off Gas, Incinerators, Thermal Oxidizers

Best Applications:  Engineered for applications that require a thermally efficient insulating component.   Applications include:

  1. Reheat, Car Bottom, and Annealing Furnaces – backup insulation
  2. Boilers
  3. Incinerators and Thermal Oxidizers
  4. Aluminum furnaces – upper wall and roof back up insulation
  5. Mineral Processing Kilns – backup insulation
  6. Fired Process Heaters
  7. Dryers
  8. Stacks

Plibrico TDS Link – https://plibri.co/3eWrlRP

Product Information: Plicast® LWI 22 is an intermediate temperature insulating castable.   With a service limit of 2200°F, Plicast LWI 22 possesses low density and good thermal efficiency making it suitable for use either as an effective backup insulating component or as a primary lining material in less demanding, lower temperature applications.   Product advantages include:

  • Low Density
  • Low Thermal Conductivity
  • Adequate Strength
  • Versatility for a wide range of applications
  • Long Storage Life

Available Internationally As:  Plico® Castable LW 22

Plibrico SDS Link – https://plibri.co/3tJ4E81

Product: Plicast LWI 20 Trowl Mix

Product #: 16012

Service Temperature Limit:  2000°F

Installation Method:  Trowling

Shelf Life: 12 months

Industries: Mineral Processing, Steel, Power Generation, Boilers, Incineration, Off Gas

Best Applications:  Engineered for troweling applications and repairs that require a good general use, thermally efficient, intermediate duty, refractory castable, applications include:

  1. Boilers – fire tube and water tube
  2. Reheat and forge furnaces
  3. Mineral processing kilns
  4. Fired process heaters
  5. Incinerators and thermal oxidizers

Plibrico TDS Link – https://plibri.co/3AE1oiJ

Product Information: Plicast® LWI® 20 Trowl Mix is a general use, thermally efficient, intermediate duty, castable engineered to mix to a thick, sticky consistency.   This tacky consistency allows it to be installed via troweling … even on vertical and some overhead applications that have proper anchoring installed.   In addition, Plicast LWI 20 Trowl Mix is great to use for repairs on lower temperature spalled and cracked refractory surfaces. Product advantages include:

  • Good strength
  • 2000°F Service Limit
  • Low Density <60 pcf
  • Good adherence to refractory surfaces
  • Favorable shelf life at 12 months 

Available Internationally As: Plico Castable LW 20 Trowl

Plibrico SDS Link – https://plibri.co/3G8CFEe

Product: Plicast LWI 20

Product #: 16005

Service Temperature Limit: 2000°F

Installation Method:  Casting

Shelf Life:  12 months

Industries:  Aluminum, Mineral Processing, Steel, Power Generation, Boilers, Incineration, Off Gas, Thermal Oxidizers

Best Applications:  Engineered for applications that require a thermally efficient insulating component.   Applications include:

  1. Reheat, car bottom and annealing furnaces – backup insulation
  2. Boilers
  3. Incinerators and thermal oxidizers
  4. Aluminum furnaces – upper wall and backup insulation
  5. Mineral processing kilns – backup insulation
  6. Fired process heaters
  7. Dryers
  8. Stacks

Plibrico TDS Link – https://plibri.co/33Qw0yR

Product Information: Plicast® LWI® 20 is a moderate temperature insulating castable.   With a service limit of 2000°F, Plicast LWI 20 possesses low density and thermal efficiency making it suitable for use as either as an efficient backup insulating component or as a primary lining material in less demanding, lower temperature applications.   Product advantages include:

  • 2000°F service limit
  • Low density <60 pcf
  • Adequate strength
  • Low thermal conductivity
  • Good volume stability
  • Good casting consistency
  • Good product storage life – 12 mo

Available Internationally As:  Plico® Castable LW 20

Plibrico SDS Link – https://plibri.co/3jTFkHB

Product: Plicast C/G LWI 23 LI

Product #: 16226

Service Temperature Limit:  2300°F

Installation Method:  Casting or Gunning

Shelf Life: 12 months

Industries: Petrochemical, Off-Gas, Incineration

Best Applications: Engineered as a high purity, very low-iron, light weight insulating refractory.   Typical applications include:

  1. Petrochemical heater walls & roofs
  2. Regenerator linings in FCCU processes
  3. Incinerators
  4. Thermal Oxidizers
  5. CO Furnaces

Plibrico TDS Link – https://plibri.co/3jdm4qX

Product Information: Plicast® C/G LWI 23 LI is a premium intermediate temperature insulating castable.   The material contains very high purity calcium aluminate cement and aggregates for the demanding needs of the petrochemical and other heat processing industries.   This material has been engineered to have the flexibility and versatility to be either cast or gunned into place.   Product advantages include:

  • Good CCS and hot strength for a light-weight insulator
  • Good Density: 68 pcf
  • 2300°F Service Limit
  • Good Thermal Conductivity
  • Very low iron content
  • Good gunability

Available Internationally As: Plico® Castable C/G LW 23 LI

Plibrico SDS Link – https://plibri.co/3jfyi2i

Product: Plicast C/G LWI

Product #: 18012

 Service Temperature Limit: 2400°F

 Installation Method:  Casting or Gunning

Shelf Life:  12 months

 Industries:  Mineral ProcessingAluminum, Steel, Power Generation, Refining, Off Gas, Boilers, Kilns

Best Applications:  Engineered for applications requiring a moderate temperature back up insulating component of normal strength.   Typical applications include:

  1. Boilers
  2. Heat treating and homogenizing furnaces
  3. Incinerators and thermal oxidizers
  4. Mineral processing kilns and furnaces
  5. Aluminum melting furnaces
  6. Dryers
  7. Stacks

Plibrico TDS Link – https://plibri.co/3hs3tnG

Product Information: Plicast® C/G LWI® is a versatile and economical insulating refractory.   With a service limit of 2400°F and low density, this material was designed to give the refractory user the option of installing it either by casting or dry gunning.   Product advantages include:

  • 2400°F serviced limit
  • Low density ~65 pcf
  • Low thermal conductivity
  • Adequate strength
  • Installation versatility

Available Internationally As:  Plico® Castable  C/G LW

 Plibrico SDS Link – https://plibri.co/34KeJbB

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®Super F AB58%2900F / 1590CSDS
    Plibrico®60 AB58%3100F / 1705CSDS
    Plibrico®80 AB78%3200F / 1760CSDS
    Plibrico®90 AB90%3400F / 1871CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®55 S54%3000F / 1648CSDS
    Plibrico®68 S68%3100F / 1705CSDS
    Plibrico®68 SA68%3100F / 1705CSDS
    Plibrico®85 S Special83%3300F / 1815CSDS
    Plibrico®90 S90%3400F / 1870CSDS
    Plibrico®SiC 80(80% SiC)2700F / 1480CSDS

    (fine grain – soft)

    Product Name%Al2O3Service LimitSDS
    Plibrico®SR 6868%3100F / 1705CSDS
    Plibrico®SR 8583%3300F / 1815CSDS
    Plibrico®SR 9088%3400F / 1870CSDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®Super F AB43%2900F / 1595CSDS
    Plibrico HyRATE®60 AB60%3100F / 1705CSDS
    Plibrico HyRATE®80 AB78%3200F / 1760CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®68 S68%3100F / 1705CSDS
    Plibrico HyRATE®85 S Special84%3300F / 1815CSDS