Plicast Al-Rezist 80 C KK

Product: Plicast Al-Rezist 80 C KK

Product #: 3304

 

Service Temperature Limit:

Aluminum Contact: 1800°F

Non-Contact: 3000°F

Installation Method:  Casting

Shelf Life: 6 months

Industries: Aluminum

Best Applications: Engineered for field cast applications for aluminum melting and holding furnaces that require enhanced performance, including:

  1. Lower walls & belly bands
  2. Division Walls
  3. Sills & Ramps
  4. Hearths

 

Plibrico TDS Link – https://plibri.co/3KeeMz2

 

Product Information: Plicast® Al-Rezist™ 80 C KK is an 80%, bauxite based, low-cement aluminum resistant castable with extra coarse aggregate, that uses an enhanced multi-additive package for superior performance against more aggressive alloys including those with high fluidity.   This product is engineered for aluminum processors who run their furnaces hotter, faster, and require a superior aluminum resistant refractory performance.   Along with excellent non-wetting and aluminum resistant properties, Plicast Al-Rezist 80 C KK also has good physical properties for demanding service conditions.   Product advantages include:

  • Excellent aluminum reaction/wetting resistance to 1800°F
  • Excellent abrasion resistance
  • Good hot strength in the aluminum melt range
  • Excellent thermal cycling performance

 

Available Internationally As: Plico® Castable Al-Rezist 80 C KK

 

Plibrico SDS Link – https://plibri.co/3AytPjP

 

/by

Plicast Al-Rezist 70 KK

Product: Plicast Al-Rezist 70 KK

Product #: 3294

Service Temperature Limit:

Aluminum Contact –  1800°F

Non-Contact – 3000°F

Installation Method:  Casting

Shelf Life: 6 months

Industries: Aluminum

Best Applications: Field cast and precast shape applications for aluminum melting and holding furnaces that require enhanced performance, including:

  1. Lower walls & belly bands
  2. Division Walls
  3. Jambs

Plibrico TDS Link – https://plibri.co/3ywRlN0

Product Information: Plicast® Al-Rezist™ 70 KK is a 70% alumina, aluminum resistant castable that uses an enhanced multi-additive package for superior performance against more aggressive alloys including those with high fluidity.   This product is engineered for aluminum processors who run their furnaces hotter, faster, and require a superior aluminum resistant refractory performance.   Along with excellent non-wetting and aluminum resistant properties, Plicast Al-Rezist 70 KK also has good physical properties for demanding service conditions.   Product advantages include:

  • Excellent aluminum reaction/wetting resistance to 1800°F
  • Good hot strength in the aluminum melt range
  • Good abrasion resistance

Available Internationally As: Plico® Castable Al-Rezist 70 KK

Plibrico SDS Link – https://plibri.co/3y11XlQ

/by

Plicast Al-Rezist EC KK

Product: Plicast Al-Rezist EC KK

Product #: 3296

Service Temperature Limit:  3100°F

Installation Method:  Casting

Shelf Life: 6 months

Industries: Aluminum

Best Applications:  Engineered to stand-up to extreme conditions in aluminum melting and holding furnaces.   Typical applications include:

  1. Lower walls & belly bands
  2. Division Walls
  3. Sills & Ramps
  4. Hearths

Plibrico TDS Link – https://plibri.co/plicast-alrezist-ec

Product Information: Plicast® Al-Rezist™ EC KK is an advanced ceramic, low-cement aluminum resistant castable that uses an enhanced multi-additive package for superior performance against more aggressive alloys including those with high fluidity.   This product is engineered for aluminum processors who run their furnaces hotter, faster, and require a superior aluminum resistant refractory performance.   Along with excellent non-wetting and aluminum resistant properties, Plicast Al-Rezist EC KK has excellent physical properties for demanding and extreme service conditions.   Product advantages include:

  • Excellent aluminum reaction/wetting resistance to 2000°F
  • Superior hot strength in the aluminum melt range
  • Excellent abrasion resistance
  • Improved thermal cycling performance

Available Internationally As: Plico Castable Al-Rezist EC KK

Plibrico SDS Link – https://plibri.co/34MEKcy

/by

Redline Red Hot G 60A

Product: Redline Red Hot G 60A

Product #: 52403

Service Temperature Limit:

Aluminum Contact – 1700°F

Non-Contact – 3100°F

Shelf Life:  9 months

Product Information: Redline Red Hot G 60A is a mullite based gun mix designed for resurfacing existing refractory surfaces.   It is generally applied in hot conditions, but can also be used cold.   This material contains a non-wetting system and can be used above and below metal line in aluminum processing furnaces.

/by

Redline Red Hot G 70A

Product: Redline Red Hot G 70A

Product #: 52404

Service Temperature Limit:

Aluminum Contact – 1700°F

Non-Contact – 3100°F

Shelf Life:  9 months

Product Information: Redline Red Hot G 70A is a mullite based gunning mix which can be applied either hot or cold.   It develops an excellent bond with existing refractory surfaces and was designed to be applied over worn linings in aluminum processing furnaces.   It contains a non-wetting system and can be applied both above and below metal line.

/by

Redline Redgun 60A

Product: Redline Redgun 60A

Product #: 52401

Service Temperature Limit:

Aluminum Contact – 1700°F

Non-Contact – 3100°F

Shelf Life:  9 months

Product Information: Redline Redgun 60A is a mullite based gun material which exhibits good thermal shock resistance and volume stability.   It contains a non-wetting additive system which makes it resistant to molten aluminum.   Applications include: resurfacing aluminum furnace walls (upper and lower), and in some cases, complete wall thicknesses.

/by

Redline Redgun 70A

Product: Redline Redgun 70A

Product #: 52402

Service Temperature Limit:

Aluminum Contact – 1700°F

Non-Contact – 3100°F

Shelf Life:  9 months

Product Information: Redline Redgun 70A is a high purity mullite based gun material that exhibits good thermal shock resistance and volume stability.   It contains a non-wetting additive system that makes it resistant to molten aluminum.   Applications include: resurfacing aluminum furnace walls (upper and lower), and in some cases, complete wall thicknesses.

/by
,

Redline Redflow FS-A

Product: Redline Redflow FS-A

Product #: 52210

Service Temperature Limit:

Aluminum Contact – 1700°F

Non-Contact – 2200°F

Shelf Life: 6 months

Product Information: Redline Redflow FS-A is a low cement, fused silica castable which exhibits excellent flow properties.   It contains a non-wetting additive package for molten aluminum contact applications that are subject tot high degrees of thermal shock such as filter bowls, casting troughs, and some transfer troughs.

/by

Redline Redflow 70A

Product: Redline Redflow 70A

Product #: 52208

Service Temperature Limit:

Aluminum Contact – 1700°F

Non-Contact – 3100°F

Shelf Life:  6 months

Product Information: Redline Redflow 70A is a high purity mullite based castable that exhibits excellent flow properties.   This material can be pumped.   Designed for applications where molten aluminum processing operations require high resistance to corrosion, high strength and abrasion resistance.   Applications include: aluminum melting/holding furnaces, troughs and ladles.

/by

Redline Redcast 70A

Product: Redline Redcast 70A

Product #: 52204

Service Temperature Limit:

Aluminum Contact – 1700°F

Non-Contact – 3100°F

Shelf Life:  6 months

Product Information: Redline Redcast 70A is a high purity mullite castable that offers outstanding strength, abrasion and thermal shock resistance, and is highly resistant to alkali attack.   It is designed for severe wear areas which are subject to oxide growth within aluminum melting equipment.   Used where high mag containing alloys are a problem as well as in transfer troughing.

/by

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®Super F AB58%2900F / 1590CSDS
    Plibrico®60 AB58%3100F / 1705CSDS
    Plibrico®80 AB78%3200F / 1760CSDS
    Plibrico®90 AB90%3400F / 1871CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico®55 S54%3000F / 1648CSDS
    Plibrico®68 S68%3100F / 1705CSDS
    Plibrico®68 SA68%3100F / 1705CSDS
    Plibrico®85 S Special83%3300F / 1815CSDS
    Plibrico®90 S90%3400F / 1870CSDS
    Plibrico®SiC 80(80% SiC)2700F / 1480CSDS

    (fine grain – soft)

    Product Name%Al2O3Service LimitSDS
    Plibrico®SR 6868%3100F / 1705CSDS
    Plibrico®SR 8583%3300F / 1815CSDS
    Plibrico®SR 9088%3400F / 1870CSDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®Super F AB43%2900F / 1595CSDS
    Plibrico HyRATE®60 AB60%3100F / 1705CSDS
    Plibrico HyRATE®80 AB78%3200F / 1760CSDS

    Phosphate Bond

    Product Name%Al2O3Service LimitSDS
    Plibrico HyRATE®68 S68%3100F / 1705CSDS
    Plibrico HyRATE®85 S Special84%3300F / 1815CSDS