Product: Redline Redlite 20G
Product #: 55301
Service Temperature Limit: 2000°F
Shelf Life: 12 months
Product Information: Redline™ Redlite 20G is a lightweight insulating gun mix that is engineered for service at low to moderate temperatures. Generally used as backup insulation, it can also be used for stacks and door linings in low temperature applications.
Product: Redline Redlite 24G
Product #: 55303
Service Temperature Limit: 2400°F
Shelf Life: 12 months
Product Information: Redline™ Redlite 24G is a high temperature insulating gun mix. It can be used in a variety of applications including heat treating furnaces, thermal oxidizers, and flue stacks.
Product: Redline Rapidlite FS-A
Product #: 53501
Service Temperature Limit:
Aluminum Contact – 1700°F
Non-Contact – 2200°F
Shelf Life: 6 months
Product Information: Redline™ Rapidlite FS-A is a unique, chemically bonded, lightweight fused silica castable that has been engineered for molten aluminum contact applications that require thermal shock resistance and low thermal conductivity. This material is designed for use in moderate to light flow applications. It’s unique bonding system allows for fast setting and turnaround. Stripping of molds can generally be done within 2 hours of casting. This material will adhere extremely well to existing refractory surfaces.
Product: Plicast Al-Tuff LWI 24 HS
Product #: 3267
Service Temperature Limit:
Aluminum Contact – 1700°F
Non-Contact – 2400°F
Installation Method: Casting
Shelf Life: 6 months
Industries: Aluminum
Best Applications: This lightweight material with exceptionally high strength is recommended for applications that include:
Plibrico TDS Link – https://plibri.co/3cu62Cj
Product Information: Plicast® LWI® 24 HS is a nonwetting insulating castable that is based on a light weight alumino-silicate aggregate system. This lightweight material possess exceptionally high strength in conjunction with low density. When compared to traditional lightweight refractories, this material offers an impressive 200% more in cold crushing strength (CCS). The castables increased strength does not affect its density, which is maintained at a noteworthy 80 pounds per cubic foot (pcf). Product advantages include:
Available Internationally As: Plico® Castable A-T LW 24 HS
Plibrico SDS Link – https://plibri.co/34kFlSr
Product: Plicast Al-Tuff LWI 28
Product #: 16506
Service Temperature Limit: 2800°F
Installation Method: Casting
Shelf Life: 9 months
Industries: Aluminum
Best Applications: Engineered for aluminum melting or processing applications that require a non-wetting, very high temperature, light-weight back-up insulating component. Typical aluminum applications include:
Plibrico TDS Link – https://plibri.co/3BbeXqb
Product Information: Plicast® Al-Tuff® LWI® 28 is a very high temperature non-wetting insulating castable. A service limit of 2800°F and good strength make it suitable to use as either a backup insulating component in high temperature applications, or as a primary lining material in less severe applications. Product advantages include:
Available Internationally As: Plico Castable A-T LWI 28
Plibrico SDS Link – https://plibri.co/3utmj71
Product: Plicast Al-Tuff LWI 24
Product #: 16505
Service Temperature Limit:
Aluminum Contact – 1700°F
Non-Contact – 2450°F
Installation Method: Casting
Shelf Life: 12 months
Industries: Aluminum
Best Applications: Engineered for field-cast and pre-cast applications in aluminum melting and processing, including:
Plibrico TDS Link – https://plibri.co/39n07jk
Product Information: Plicast® Al-Tuff® LWI® 24 is the industry standard, light-weight back-up insulating castable for aluminum furnace applications. The materials non-wetting properties give end-users an extra level of protection for metal contact applications over IFB’s and standard LWI castables. It is a time-tested and proven material choice for the aluminum casting-house. Product advantages include:
Available Internationally As: Plico® Castable A-T LWI 24
Plibrico SDS Link – https://plibri.co/3lBWImq
Product: Plicast Al-Tuff LWI 20
Product #: 16503
Service Temperature Limit:
Aluminum Contact – 1500°F
Non-Contact – 2000°F
Installation Method: Casting
Shelf Life: 12 months
Industries: Aluminum
Best Applications: Engineered for field-cast and pre-cast applications in aluminum melting and processing, applications include:
Plibrico TDS Link – https://plibri.co/3tVsyQJ
Product Information: Plicast® Al-Tuff® LWI® 20 is moderate temperature, light-weight back-up insulating castable for aluminum furnace applications. This material offers low density, thermal efficiency, and has non-wetting properties that give end-users an extra level of protection for metal contact applications over IFB’s and standard LWI castables. Product advantages include:
Available Internationally As: Plico Castable A-T LWI 20
Plibrico SDS Link – https://plibri.co/35mdRft
| Product Name | %Al2O3 | Service Limit | SDS |
| Plibrico®Super F AB | 58% | 2900F / 1590C | SDS |
| Plibrico®60 AB | 58% | 3100F / 1705C | SDS |
| Plibrico®80 AB | 78% | 3200F / 1760C | SDS |
| Plibrico®90 AB | 90% | 3400F / 1871C | SDS |
| Product Name | %Al2O3 | Service Limit | SDS |
| Plibrico®55 S | 54% | 3000F / 1648C | SDS |
| Plibrico®68 S | 68% | 3100F / 1705C | SDS |
| Plibrico®68 SA | 68% | 3100F / 1705C | SDS |
| Plibrico®85 S Special | 83% | 3300F / 1815C | SDS |
| Plibrico®90 S | 90% | 3400F / 1870C | SDS |
| Plibrico®SiC 80 | (80% SiC) | 2700F / 1480C | SDS |
| Product Name | %Al2O3 | Service Limit | SDS |
| Plibrico®SR 68 | 68% | 3100F / 1705C | SDS |
| Plibrico®SR 85 | 83% | 3300F / 1815C | SDS |
| Plibrico®SR 90 | 88% | 3400F / 1870C | SDS |
| Product Name | %Al2O3 | Service Limit | SDS |
| Plibrico HyRATE®Super F AB | 43% | 2900F / 1595C | SDS |
| Plibrico HyRATE®60 AB | 60% | 3100F / 1705C | SDS |
| Plibrico HyRATE®80 AB | 78% | 3200F / 1760C | SDS |
| Product Name | %Al2O3 | Service Limit | SDS |
| Plibrico HyRATE®68 S | 68% | 3100F / 1705C | SDS |
| Plibrico HyRATE®85 S Special | 84% | 3300F / 1815C | SDS |